10oz - 28oz Canisters

Get portable 10oz - 28oz canisters of refrigerants for fast HVAC/R service, top-offs, and testing-without hauling full cylinders.

Read more
show more

10oz - 28oz Canisters

These small-format canisters are a budget-friendly, grab-and-go accessory for licensed contractors, DIY-capable homeowners, property managers, and light commercial techs. Ideal for portable field service or bench work, they streamline quick recharges, minor leak top-offs, and component swaps where a full cylinder isn’t necessary. Expect easy handling and reduced waste, with options typically priced from about $13 to $310.

Match the canister to the refrigerant on the equipment nameplate. Options include R-22, R-32, R-290, R-404A, R-410A, and R-422B-covering common residential and light commercial needs from comfort cooling to reach-in refrigeration. Note that refrigerants are not interchangeable; blends like R-410A must be charged correctly and hydrocarbons like R-290 are flammable and intended only for systems listed for their use.

Specs guidance: SEER2, HSPF2, BTU, and tonnage ratings do not apply to canisters. Selection is based on refrigerant type and connection style. Choose the can size that fits the task-smaller 10-12oz for spot top-offs and testing, larger 20-28oz for broader service. Verify can-tap compatibility (self-sealing or piercing) and hose/port sizes: most manifolds use 1/4" SAE, while many R-410A systems use 5/16" service ports, requiring an adapter.

For best results, weigh in charges, repair leaks before recharging, and follow all local, state, and federal regulations. Professional installation and service are recommended; limited DIY tasks may be possible where permitted and when using proper tools and safety procedures.

Top Brands for 10oz - 28oz Canisters

Shop trusted options from Refrigerant, Chempenn, and Generic to cover routine service, testing, and light commercial needs with dependable, portable canisters.

Frequently Asked Questions

  • What refrigerant types are available in 10oz-28oz canisters for quick service work?

    Common options include R-22, R-32, R-290, R-404A, R-410A, and R-422B, sized for fast top-offs, testing, and small repairs.

  • Do I need an EPA 608 certification to purchase or use these refrigerant canisters?

    Requirements can vary by refrigerant and jurisdiction. R-22 servicing requires Section 608 certification. Check current federal, state, and local rules before purchase and use.

  • Which small canister is compatible with my R-410A system for topping off?

    Use an R-410A canister only. Many R-410A systems have 5/16" ports; use the correct hose or adapter. Charge carefully and follow manufacturer procedures.

  • Are adapters or specific charging hoses required for these small canisters?

    Often yes. Many cans use self-sealing taps; some require a piercing tap. Most hoses are 1/4" SAE, while some systems (e.g., R-410A) need a 5/16" adapter.

  • What’s the difference between R-22, R-32, and R-410A for service applications?

    R-22 is legacy and regulated; R-32 is an A2L (mildly flammable) single-component refrigerant; R-410A is a high-pressure blend. None are drop-in interchangeable.

  • Can these canisters be used for light commercial refrigeration systems like R-404A?

    Yes, for minor service and top-offs on R-404A equipment. Weigh charges and follow manufacturer specs; large charges may require full cylinders.

  • How should small refrigerant canisters be stored and disposed of?

    Store upright, cool, and ventilated, away from ignition sources (especially for R-290). Recover contents, depressurize, and follow local rules for recycling/disposal.

  • What quantity (oz) should I choose for minor leak top-offs vs larger service tasks?

    10-12oz works for small top-offs and testing; 20-28oz suits broader service. Always weigh in and repair leaks before adding refrigerant.

  • Are these canisters self-sealing and reusable between calls?

    Many are self-sealing. With a compatible tap, you can use partial contents, then cap and store per manufacturer guidelines.

  • Can I mix refrigerant types or use substitutes without relabeling the system?

    No. Never mix refrigerants. Only use the type specified on the nameplate. If retrofitting (e.g., R-22 to R-422B), follow proper procedures and relabel the system.

Common FAQ Quick Education

Featured Videos