Heat Pump 3 - 10 Ton
Shop Heat Pump 3 - 10 Ton split systems featuring SEER2 14 efficiency and R-410A refrigerant for dependable comfort in larger homes and light commercial spaces.
-
List price:
$5,781.00Our price:
$4,280.00You save $1,501.00!
List price:
$6,471.00Our price:
$4,795.00You save $1,676.00!
List price:
$7,367.00Our price:
$5,455.00You save $1,912.00!
List price:
$14,109.00Our price:
$10,450.00You save $3,659.00!
List price:
$14,743.00Our price:
$10,920.00You save $3,823.00!
Heat Pump 3 - 10 Ton
These split-system heat pump condensers cover 3, 4, 5, 7.5, and 10 ton capacities, delivering approximately 36,000 to 120,000 BTU of heating and cooling. Ideal for replacing existing 3-10 ton R-410A equipment or for new installations that require SEER2 14 compliance, they serve larger residences, multi-family properties, and small office or retail spaces. Choose from the 3-5 ton range for bigger homes and the 7.5-10 ton range for light commercial loads.
Designed for professional installation, each outdoor unit pairs with a properly matched indoor air handler or coil to achieve published SEER2 ratings and reliable performance. Using R-410A refrigerant, these systems support modern charge and line length guidelines; when AHRI-matched, they meet SEER2 14 requirements and deliver efficient year-round comfort.
Contractors and property managers appreciate the straightforward serviceability and durable construction suited to frequent runtimes. Expect robust performance, clear electrical and control connections, and compatibility with standard 24V heat pump tthermostats as specified by the model. Professional sizing via a load calculation helps ensure the right tonnage for your application and code compliance.
Offering strong value between approximately $4,280 and $14,743, this category balances efficiency, capacity, and dependability for projects where uptime matters and budgets are fixed. Pro install is required; verify power, clearances, and AHRI matches before ordering.
Top Brands for Heat Pump 3 - 10 Ton
Daikin leads this category with reliable, R-410A split-system heat pumps in 3-10 ton sizes, supported by broad matchups and proven light-commercial performance.
Frequently Asked Questions
-
What size heat pump (3, 4, 5, 7.5, or 10 tons) is right for my application?
Have a licensed contractor perform a Manual J (residential) or Manual N/engineered load calc (commercial). This ensures the proper 36,000-120,000 BTU capacity for your building and climate.
-
Are these split-system heat pumps suitable for light commercial installations?
Yes. The 7.5-10 ton options are commonly specified for small offices, retail, and multi-tenant spaces. Verify local codes, ventilation requirements, and electrical service.
-
Do these Daikin R-410A models meet current SEER2 14 efficiency requirements?
Yes, when paired with an AHRI-matched indoor coil or air handler, these systems meet SEER2 14 compliance and deliver rated performance.
-
What indoor air handler/coil matches are compatible with these outdoor units?
Use Daikin AHRI-listed matches. Residential 3-5 ton units pair with appropriately sized air handlers or cased coils with R-410A TXVs; 7.5-10 ton units pair with light-commercial handlers/coils. Always confirm an AHRI match.
-
Are there specific electrical or voltage requirements for 7.5-10 ton units?
Typically 208/230V 3-phase or 460V 3-phase is required for 7.5-10 ton equipment, while many 3-5 ton systems are 208/230V single-phase. Verify the nameplate, MCA/MOCP, and local code.
-
Is professional installation required for these R-410A split heat pumps?
Yes. A licensed HVAC contractor must handle load sizing, refrigeration piping, evacuation, charging, wiring, and commissioning to protect performance and warranty.
-
Can these systems replace existing R-410A heat pumps without line set changes?
Often, if line sizes match the new unit and the lines are clean and tested. Lines must be inspected, flushed if needed, pressure-tested, and evacuated to manufacturer specs.
-
What warranty coverage applies to Daikin 3-10 ton split heat pumps?
Daikin offers limited parts warranties; terms vary by model and residential/commercial use. Registration and proper installation are required. Labor is typically not included.
-
Do I need a new thermostat or controls for these systems?
Use a compatible 24V heat pump thermostat with the correct staging as specified by the selected unit. Confirm wiring diagrams and any auxiliary heat or economizer controls.
-
What clearances and airflow are required around the condenser?
Follow the installation manual. Maintain unobstructed airflow on all sides and above the unit, provide service access, and keep the coil free of debris for peak efficiency.
