Water Heaters
Upgrade your home’s hot water with efficient, budget-smart Water Heaters. Choose from proven electric tanks or a Hybrid Electric Heat Pump that slashes energy use while delivering reliable comfort backed by Rheem engineering.
Water Heaters
Whether you’re replacing a tired tank or planning a new build, this category covers two popular choices: Electric Tank Water Heaters for simple, dependable performance and Hybrid Electric Heat Pump Tank Water Heaters for premium efficiency. Homeowners, DIY-capable buyers, licensed contractors, property managers, and light commercial users will find options that balance first cost and long-term savings.
Hybrid units use a built-in heat pump to pull warmth from ambient air, greatly reducing electric consumption compared to standard resistance elements. They can automatically switch modes during peak demand or colder conditions, ensuring consistent domestic hot water heating. Standard electric tanks remain a solid, low-maintenance choice for straightforward replacements and tight budgets.
About specs: SEER2, HSPF2, BTU, tonnage, and refrigerant are HVAC cooling/heating metrics and aren’t typically used to select water heaters. Instead, focus on capacity (gallons), First-Hour Rating, Uniform Energy Factor (UEF), recovery rate, and available voltage. Most hybrid and electric tanks run on a dedicated 240V circuit; always confirm exact electrical, clearance, and condensate requirements in the product manual and local codes.
Top Brands for Water Heaters
Rheem leads our lineup with dependable electric tanks and cutting-edge hybrid heat pump models engineered for quiet operation, high UEF ratings, and long-term durability.
Frequently Asked Questions
-
What is the difference between a hybrid electric heat pump water heater and a standard electric tank?
A hybrid uses a heat pump to move heat from the air into the water, cutting electricity use significantly. A standard tank heats water with electric elements only.
-
What size hybrid heat pump water heater do I need for my household?
Match tank size and First-Hour Rating to your peak hot water demand. Typical homes choose 50-80 gallons; verify occupancy, bath count, and simultaneous use to size correctly.
-
Can a hybrid heat pump water heater be installed in a garage or utility room?
Yes, if the space meets ambient temperature and airflow needs. Garages, basements, and utility rooms are common; follow clearance, ducting, and code guidelines.
-
What electrical and space requirements are needed for a hybrid water heater?
Most require a dedicated 240V circuit, adequate air volume or ducting, and a condensate drain. Check the installation manual for circuit size, clearances, and venting options.
-
How much energy can I save by switching to a hybrid heat pump water heater?
Hybrids can use far less electricity than standard tanks, often delivering significant annual savings while maintaining hot water availability.
-
Do hybrid water heaters qualify for rebates or tax credits?
Many models qualify for federal tax credits and local utility rebates. Eligibility varies by location and efficiency ratings; confirm before purchase.
-
What maintenance is required for hybrid electric water heaters?
Clean the air filter, flush sediment periodically, inspect the anode rod, and keep the condensate line clear for reliable performance.
-
Are these Rheem models suitable for light commercial applications?
Select units can support light commercial needs. Verify capacity, recovery rate, and warranty terms for multi-user or peak-demand environments.
-
Do hybrid heat pump water heaters make the room cooler?
They draw heat from the surrounding air, slightly cooling and dehumidifying the space. Ducting can direct intake or exhaust air if needed.
-
Do I need a condensate drain or pan?
Yes. The heat pump produces condensate that must drain to an approved location or pump. Use a drain pan where required by code or when installed above living spaces.
