Heat Pump with Back Up Heat Strip / 2 Ton

Upgrade your comfort with our 2 Ton Heat Pump Split System selection engineered for modern SEER2 efficiency.

Read more
show more

2 Ton

A 2-ton (approximately 24,000 BTU) heat pump split system is a smart fit for small homes, condos, and zoned areas around 800-1,200 sq ft. Whether you’re replacing an older outdoor unit, pairing with a matched air handler, or building out a light commercial zone, these systems deliver year-round heating and cooling with quiet performance.

Choose the efficiency level that matches your goals: SEER2 14.3 and 15.2 for value-focused upgrades, or 17.5, 18, and 20 SEER2 for premium energy savings and comfort. Professional installation is required to ensure proper charge, airflow, and warranty activation.

Options include R-32 and R-454B refrigerants for low-GWP performance, with cabinet widths commonly 17.5 in and 18.13 in to align with existing coils or furnaces. Match capacity (2 ton), metering device, and indoor coil to the outdoor unit for approved performance, and verify line set size and length per the manufacturer.

Top Brands for 2 Ton

Shop leading 2-ton choices from Goodman, Rheem, and Bosch, alongside select options from Gree and EcoTemp to fit a range of budgets and feature sets.

Frequently Asked Questions

  • What home size or load is a 2-ton heat pump split system best suited for?

    Typically 800-1,200 sq ft, but actual sizing should follow a Manual J load calculation that considers insulation, windows, and climate.

  • How do SEER2 ratings like 14.3 vs 20 impact energy costs and payback?

    Higher SEER2 units use fewer kWh, lowering bills. Payback depends on climate, utility rates, and runtime; many homeowners see savings over several seasons.

  • What is the difference between R-32 and R-454B refrigerants for these systems?

    Both are low-GWP A2L refrigerants replacing R-410A. R-32 offers strong capacity and efficiency; R-454B operates at similar pressures. Both require A2L-safe installation.

  • Are these 2-ton split heat pumps compatible with my existing air handler and line set?

    Only when an approved match. The refrigerant, capacity, coil, and metering device must align, and line set size/length must meet manufacturer specs.

  • Do these systems require a licensed contractor for installation and warranty activation?

    Yes. Manufacturers require licensed installation and start-up for warranty validation, code compliance, and proper performance.

  • What cabinet widths (17.5 or 18.13 inches) should I match with my existing coil/furnace?

    Match the cabinet width to your furnace or plenum to maintain airflow. A properly sized transition can be used when widths differ.

  • Are there any electrical or breaker requirements for these 2-ton heat pumps?

    Follow the unit nameplate for MCA/MOP, provide a dedicated circuit and disconnect, and size wiring/breakers per code and installer guidance.

  • How do I choose between brands like Goodman, Rheem, Bosch, Gree, and EcoTemp for my application?

    Compare efficiency tiers, inverter features, warranty terms, parts availability, and budget. Your contractor can recommend a matched set.

  • Will a 2-ton heat pump provide reliable heat in colder climates?

    Many models heat effectively below freezing. Check low-ambient ratings and plan for auxiliary heat in extreme cold for consistent comfort.

  • Can I reuse my existing thermostat with a new 2-ton heat pump?

    Often yes, provided it supports heat pump modes and any staging/inverter requirements. Your installer will confirm wiring and compatibility.

Common FAQ Quick Education

Featured Videos