R-410A Refrigerant 28.2 oz One-Step Can with Gauge & Hose — 1/4″ Connection
This kit adds refrigerant without a manifold setup. It includes a 28.2 oz (1.8 lb) disposable one-step can of R-410A, a reusable gauge, and a charging hose with a 1/4″ connection. Connect the hose to the can and to the system's service port, press the button, and watch the gauge while you top off. It's built for ducted R-410A air conditioners and heat pumps with a 1/4″ service port. For a ductless unit, the mini split R-410A recharge kit adds the 5/16″ adapter.
Is the R-410A Gauge Kit the Right Choice?
This kit suits a technician who needs to add a small amount of R-410A to a central split system or packaged heat pump, such as finishing a charge after a repair, without unpacking a full manifold set. The gauge shows pressure as you charge, and you keep it for the next can.
It's also a practical starter kit. Buy it once, then refill with the less expensive can-only version. The contents are plain R-410A with no sealant or dye, so it's the right choice once a leak has been repaired.
Ideal for: Topping off ducted R-410A central air conditioners and heat pumps with a 1/4″ service port.
Need more capacity? Step up to the R-410A 25 lb Jug, Factory Sealed for full system charges.
Charging amounts are general guidelines only. Actual requirements depend on system size, line-set length, ambient conditions, and the amount of refrigerant lost. For use by qualified HVAC/R technicians. Request free sizing assistance, contact Budget Heating, or call 813-885-7999.
What's Included
| Refrigerant Can | R-410A Refrigerant 28.2 oz (1.8 lb) Disposable One-Step Can |
|---|---|
| Gauge & Hose | R-410A / R-404A / R-22 Gauge with 1/4″ SAE Fitting & Hose (reusable) |
| Service Connection | 1/4″ SAE |
| Charging Method | One-step push-button charging |
| Additives | None (no leak stop or dye) |
| Best For | Ducted R-410A split systems and heat pumps |
| Mini Split Use | Requires a 5/16″-to-1/4″ adapter (not included) |
| Global Warming Potential | 2,088 |
Refrigerant and charging tools come in one box, so a quick R-410A top-off on a ducted system doesn't require a full manifold setup.
Refrigerant & Gauge Kit Features
R-410A Refrigerant Can
- 28.2 oz (1.8 lb) of R-410A
- No leak stop or dye
- Disposable one-step can
- For R-410A air conditioners and heat pumps
- Sized for top-offs and finishing a charge
- Compact for ladders and rooftops
- Can-only refills sold separately
- No cylinder deposit or return
- Good after a completed leak repair
- For qualified HVAC/R technicians
One-Step Gauge & Hose
- Reusable gauge included
- Gauge reads R-410A, R-404A, and R-22
- Charging hose with 1/4″ connection
- Fits standard 1/4″ service ports
- Connect, press, and charge
- Watch pressure while you charge
- No manifold setup for small top-offs
- Reuse with future R-410A cans
- Good starter kit before buying refills
- Compact enough for a service bag
Frequently Asked Questions
How do I use the one-step can and gauge?
Connect the charging hose to the can and to the system's 1/4″ service port, then press the button to add refrigerant while watching the gauge. Follow the equipment manufacturer's charging procedure.
What gauge comes with this kit?
It includes the R-410A / R-404A / R-22 gauge with 1/4″ SAE fitting and hose, which you can reuse after the can is empty.
Can I use this on a ductless mini split?
Only with an adapter, because mini splits have a 5/16″ port. Add the 5/16″ female to 1/4″ male adapter or choose the complete mini split R-410A kit.
My system is still leaking. Should I use this kit?
Fix the leak first, or use the R-410A leak stop kit with gauge and hose, which seals small leaks up to 300 microns and adds UV dye.
How do I tell if my system uses R-410A?
Check the data plate on the outdoor unit. Only add R-410A to equipment rated for it. R-32 and R-454B systems need their own refrigerant.
What's a good full manifold for more detailed diagnostics?
For superheat and subcooling work beyond a quick top-off, the NAVAC analog manifold gauge covers R-410A, R-22, R-32, and R-454B.
