3.5 Ton Goodman 17.5 SEER2 R-32 GZV7SA Side Discharge Inverter Heat Pump System
The Goodman GZV7SA4210 side discharge inverter heat pump and AHVE60DP1300 communicating air handler deliver 3.5 tons (42,000 BTU) of variable-speed heating and cooling at an AHRI-certified 17.5 SEER2 (AHRI #215429198). Goodman pairs this outdoor unit with its largest AHVE cabinet, the 1 HP AHVE60DP1300, and rates the GZV7SA4210 for 31,000 BTU/h of heat at 5°F. The result is a high-capacity, cold-climate-capable R-32 system for larger homes, delivered through a compact side discharge outdoor unit rather than a bulky top-discharge condenser.
Is a 3.5 Ton GZV7SA Heat Pump the Right Size?
A 3.5 ton heat pump commonly serves homes of about 1,800 to 2,100 square feet. With heating this strong, a Manual J calculation that includes your winter design temperature is the best way to confirm the size and plan any backup heat.
Larger homes often have multiple stories, open plans, and long duct runs. The AHVE60DP1300 is listed at 1,320 SCFM with this outdoor unit and holds airflow up to 0.9" w.c. external static, but ductwork should still be sized to move that air quietly. Because the AHVE60DP1300 is 58" tall, confirm the mechanical space can accommodate it.
Ideal for: Larger three- and four-bedroom homes, two-story homes, colder-climate heat pump installs, and homes replacing 3.5 ton systems where the outdoor unit needs a slim side discharge profile.
Need more capacity? Step up to the 4 Ton Goodman GZV7SA4810 & AHVE60DP1300 Inverter Heat Pump System for larger homes requiring additional heating and cooling capacity.
Recommended applications are general guidelines only. Actual system requirements depend on insulation, windows, sun exposure, ceiling height, climate, occupancy, and ductwork. Request free sizing assistance, contact Budget Heating, or call 813-885-7999.
What's Included
| Outdoor Condensing Unit | GZV7SA4210 — 3.5 Ton High-Efficiency Side Discharge Inverter Heat Pump |
|---|---|
| Indoor Air Handler | AHVE60DP1300 Communicating Variable-Speed Multi-Position Air Handler with EEV |
| Application | Split System Heat Pump, Cooling & Heating — 17.5 SEER2, AHRI #215429198 |
| Refrigerant | R-32 |
| Compressor | Inverter-Driven Variable-Speed Swing Compressor |
| Blower Motor | 1 HP Variable-Speed ECM, 12" Blower, Constant CFM |
| Electrical | 208-230V, Single Phase, 60 Hz Condensing Unit |
| Air Handler Electrical | 208/230V, Single Phase, 60 Hz |
The GZV7SA4210 heat pump weighs 179 lb in a 37" W x 12-5/8" D x 39" H cabinet and ships with 118 oz of R-32. Indoors, the AHVE60DP1300 air handler measures 24-1/2" W x 58" H x 21" D. Goodman specifies a 1-1/8" suction line, so an insulated 25 ft 1-1/8" x 3/8" copper line set plus a 7/8" adapter at the outdoor valve is typical. For backup heat, the 10 kW HKSX-10 heat strip is one of the kits offered.
Condensing Unit & Air Handler Features
GZV7SA4210 Outdoor Heat Pump
- 3.5 ton GZV7S inverter heat pump on R-32
- 41,000 BTU/h maximum cooling and heating (AHRI)
- 31,000 BTU/h heating at 5°F
- 118 oz factory charge; 9°F ±1°F subcooling target
- 37.5 MCA with 40 amp maximum overcurrent protection
- 73 dBA normal sound rating; quiet mode down to 58 dBA
- Seven-segment LED with fault code storage
- Wire fan discharge grille and top/side maintenance access
- High-corrosion ZAM unpainted steel frame and legs
- Carries ENERGY STAR Cold Climate status on Goodman's spec sheet
AHVE60DP1300 Communicating Air Handler
- Largest AHVE cabinet with 1 HP variable-speed ECM
- 1,320 SCFM listed airflow with the GZV7SA4210
- 24-1/2" W x 58" H x 21" D, 167 lb ship weight
- EEV metering with factory R-32 sensor
- All-aluminum coil with 7mm tubes
- Horizontal or vertical configuration
- Thermostat-adjustable low CFM for continuous fan
- Glue-less insulation retention and leather grain finish
- Coil mounting track
- Pairs with 5, 8, or 10 kW breakered heat strips
Specifications & Manuals
Product documentation includes GZV7S heat pump specifications, installation instructions, service and parts manuals, AHVE air handler specifications and installation instructions, and Goodman warranty certificates to assist with equipment selection, installation, and service.
Frequently Asked Questions
What size home is the 3.5 ton GZV7SA4210 system built for?
Generally about 1,800 to 2,100 square feet. Larger homes vary widely in layout and insulation, so a load calculation covering both heating and cooling is strongly recommended.
Why does a 3.5 ton heat pump use the 5 ton AHVE60DP1300 air handler?
Goodman pairs the GZV7SA4210 with the AHVE60DP1300 in its expanded performance data, and this AHRI-certified combination is rated 17.5 SEER2. The air handler delivers the 1,320 SCFM listed for this outdoor unit.
How does the GZV7SA4210 compare with the GZV6SA4210?
The GZV7SA4210 is rated for 31,000 BTU/h of heating at 5°F versus 27,400 for the GZV6SA4210, and this system is rated 17.5 SEER2 compared with 17 SEER2 for the 3.5 ton GZV6SA4210 system. It also uses a larger 118 oz charge and 40 amp breaker.
What electrical service does the GZV7SA4210 need?
Goodman lists a 37.5 amp minimum circuit ampacity and a 40 amp maximum time-delay fuse or HACR breaker on 208-230V single phase. The AHVE60DP1300 and any heat kit are wired separately.
What outdoor accessories does Goodman offer for the GZV7SA4210?
Goodman's GZV7S accessory list includes a wind baffle, snow guards, hail guard, drain pan heater, and a powder-coated wall-mounted bracket, plus anchor bracket kits for hurricane-rated installations.
Who typically chooses the 3.5 ton GZV7SA system?
Owners of larger homes in climates with real winters who want strong heat pump heating and variable-speed comfort, and contractors replacing 3.5 ton systems where outdoor space is tight.
GZV7S Technical Specifications
GZV7S Installation Instructions
GZV7S Parts Manual
GZV7S Service Manual
GZV7S Warranty Certificate
AHVE Technical Specifications
AHVE Installation Instructions
AHVE Warranty Certificate



