3.5 Ton Goodman 17 SEER2 R-32 Side Discharge Inverter Heat Pump System
The Goodman GZV6SA4210 side discharge inverter heat pump and AHVE42CP1300 communicating air handler bring 3.5 tons (42,000 BTU) of variable-speed comfort to larger homes at an AHRI-certified 17 SEER2 (AHRI #215429794). This size moves up to Goodman's larger 39" tall side discharge cabinet with a 0.36 HP fan motor and a 100 oz R-32 charge, and it carries a strong cold-weather rating of 27,400 BTU/h of heating at 5°F. It is built for homeowners and contractors who need serious heat pump capacity in a cabinet that still mounts close to the house instead of dominating the yard.
Is a 3.5 Ton Inverter Heat Pump the Right Size?
A 3.5 ton heat pump commonly serves homes in the range of roughly 1,800 to 2,100 square feet. At this capacity, a room-by-room load calculation covering both heating and cooling is strongly recommended, since larger homes vary widely in layout and envelope.
Two-story layouts, bonus rooms over garages, large windows, and long duct runs all influence the final number. The AHVE42CP1300 holds a rated 1,320 SCFM with this outdoor unit regardless of duct static up to 0.9" w.c., which helps on retrofits, but properly sized ducts are still the key to quiet operation and full capacity.
Ideal for: Larger three- and four-bedroom homes, two-story homes, homes replacing 3.5 ton single-stage heat pumps, and properties where a side discharge unit must fit along the house or in a narrow yard.
Need more capacity? Step up to the 4 Ton Goodman GZV6SA4810 & AHVE48CP1300 Inverter Heat Pump System for larger homes requiring additional heating and cooling capacity.
Recommended applications are general guidelines only. Actual system requirements depend on insulation, windows, sun exposure, ceiling height, climate, occupancy, and ductwork. Request free sizing assistance, contact Budget Heating, or call 813-885-7999.
What's Included
| Outdoor Condensing Unit | GZV6SA4210 — 3.5 Ton Side Discharge Inverter Heat Pump |
|---|---|
| Indoor Air Handler | AHVE42CP1300 Communicating Variable-Speed Multi-Position Air Handler with EEV |
| Application | Split System Heat Pump, Cooling & Heating — 17 SEER2, AHRI #215429794 |
| Refrigerant | R-32 |
| Compressor | Inverter-Driven Variable-Speed Swing Compressor |
| Blower Motor | 3/4 HP Variable-Speed ECM, Constant CFM |
| Electrical | 208-230V, Single Phase, 60 Hz Condensing Unit |
| Air Handler Electrical | 208/230V, Single Phase, 60 Hz |
The GZV6SA4210 heat pump measures 37" W x 12-5/8" D x 39" H and weighs 168 lb. Goodman specifies a 1-1/8" suction line for this size while the outdoor valve is 7/8", so plan for an adapter such as a 1-1/8" to 7/8" copper reducer coupling along with an insulated 25 ft 1-1/8" x 3/8" line set. Indoors, the AHVE42CP1300 air handler uses a 21" wide, 53-7/16" tall cabinet with 7/8" suction and accepts the 8 kW HKTSN08X1 heat strip.
Condensing Unit & Air Handler Features
GZV6SA4210 Outdoor Heat Pump
- 3.5 ton inverter heat pump with variable-speed swing compressor
- 41,000 BTU/h cooling and 40,000 BTU/h heating maximum (AHRI)
- 27,400 BTU/h heating at 5°F
- Larger 37" W x 12-5/8" D x 39" H side discharge cabinet
- 0.36 HP digitally commutated fan motor
- Quiet mode level 3 as low as 57 dBA sound power
- 100 oz R-32 charge with 8°F ±1°F subcooling target
- 31.8 MCA with 35 amp maximum overcurrent protection
- Front and back sealing service valves
- ZAM unpainted steel base frame and legs
AHVE42CP1300 Communicating Air Handler
- 3/4 HP variable-speed ECM, 10-5/8" blower
- 1,320 SCFM rated airflow with the GZV6SA4210
- 21" W x 53-7/16" H x 21" D, 140 lb ship weight
- Electronic expansion valve and R-32 leak sensor
- Constant airflow independent of duct static pressure
- Horizontal or vertical configurations
- Screw-less sides and back reduce condensation risk
- Foil-faced insulation covers the internal casing
- CFM indicator for easy commissioning
- Field-installed 5, 8, or 10 kW heat kits
Specifications & Manuals
Product documentation includes GZV6S heat pump specifications, installation instructions, service and parts manuals, AHVE air handler specifications and installation instructions, and Goodman warranty certificates to assist with equipment selection, installation, and service.
Frequently Asked Questions
How much space can the 3.5 ton GZV6SA4210 heat pump condition?
Generally about 1,800 to 2,100 square feet. Larger homes vary widely, so a heating and cooling load calculation is strongly recommended before choosing between 3.5 and 4 tons.
What is different about the 3.5 ton system compared with the 3 ton GZV6SA3610?
The GZV6SA4210 moves to the taller 39" cabinet with a 0.36 HP fan, a 100 oz charge, and a 35 amp breaker, and it is rated for 27,400 BTU/h of heat at 5°F versus 20,000. Indoors, the AHVE42CP1300 runs at 1,320 SCFM. The system is rated 17 SEER2 versus 16.6 for the 3 ton.
Why do I need an adapter for the GZV6SA4210 suction line?
Goodman lists a 1-1/8" suction line for the 3.5 to 5 ton GZV6SA models, but the unit's suction valve is 7/8". The spec sheet notes the installer must supply 7/8" to 1-1/8" adapters for the suction connection.
Is the GZV6SA4210 quiet enough to install near a bedroom?
Its normal-mode cooling rating is 71 dBA sound power, and quiet mode can lower it to about 57 dBA at level 3 with reduced capacity. The high-density compressor sound blanket also helps keep operating noise down.
Can the GZV6SA4210 be mounted on a wall bracket?
Goodman lists the DACA-WB-3 powder-coated wall-mounted bracket as an accessory for all GZV6SA sizes, including the 3.5 ton. Follow the installation instructions and local code for structural support and clearances.
Who typically buys a 3.5 ton Goodman inverter heat pump system?
Owners of larger family homes who want variable-speed comfort and strong cold-weather heating, and contractors replacing older 3.5 ton systems where yard space or noise is a concern.
GZV6S Technical Specifications
GZV6S Installation Instructions
GZV6S Parts Manual
GZV6S Service Manual
GZV6S Warranty Certificate
AHVE Technical Specifications
AHVE Installation Instructions
AHVE Warranty Certificate



