1 To 5 ton Vertical Cased Coil
Vertical cased coils are designed for upflow or downflow applications, sitting neatly on top of your furnace or inside a vertical air handler. Their insulated cabinets improve efficiency and reduce condensation, while factory drain pans manage moisture reliably. Service-friendly panels help pros access the coil, TXV, and line connections for quick commissioning and maintenance.
Whether you are a licensed contractor, DIY-capable homeowner, property manager, or running light commercial spaces, these coils solve common needs: replacing a leaking or failed coil, matching the indoor coil to an existing condenser and furnace, and improving cooling performance and dehumidification. Select the nominal tonnage to match your outdoor unit-1 to 5 tons covers roughly 12,000 to 60,000 BTU. For best results and SEER2 performance, use AHRI-matched combinations so the system’s efficiency rating is preserved.
Most models are optimized for modern refrigerants such as R-410A, and select options may support newer blends like R-454B when paired with the correct metering device. Choose the right TXV or piston/orifice kit to match your condenser and ensure stable capacity, superheat, and subcooling. Planning a heat pump? Verify the coil and TXV are heat-pump rated. Always confirm cabinet width, height, and depth to fit your furnace or air handler opening and plenum.
Professional installation is required to protect warranty and ensure safe, code-compliant operation. A licensed technician will braze with nitrogen, evacuate to deep vacuum, pressure test, replace filter-driers, and charge by manufacturer specs for peak comfort and reliability.
Frequently Asked Questions
How do I size a vertical cased coil to match my condenser tonnage?
Match the coil’s nominal tonnage to the outdoor unit. Some AHRI matches allow a slightly larger coil for efficiency, but never undersize. Follow the approved match.
Will these coils work with R-410A or newer refrigerants like R-454B?
Most are R-410A ready. Select models and correct TXVs can support newer A2L refrigerants like R-454B. Confirm coil rating and metering device before installation.
What is the difference between vertical cased and horizontal cased coils?
Vertical cased coils are for upflow/downflow cabinets and include vertical drain pan geometry. Horizontal cased coils are built for side-to-side airflow with multi-position drains.
Do I need a TXV or is a piston/orifice included with the coil?
Many ship with a piston; a model-specific TXV may be required for SEER2 performance or heat pumps. Verify the correct metering device for your condenser.
Can I use this coil with a heat pump as well as an AC?
Yes, if the coil and metering device are heat-pump rated. Ensure an AHRI match and proper check valves or heat pump TXV as specified by the manufacturer.
What cabinet dimensions should I check to ensure the coil fits my furnace/air handler?
Measure cabinet width, height, and depth, the supply opening, and plenum connections. Confirm service clearance and drain orientation for proper installation.
Is professional installation required to maintain warranty on a cased coil?
Yes. Most manufacturers require licensed installation, proper brazing with nitrogen, evacuation, and documented startup to keep the warranty valid.
How do I match coil SEER2 ratings with my outdoor unit?
The coil itself doesn’t have a SEER2 rating; the system rating comes from the matched outdoor unit and furnace/air handler. Use AHRI-listed combinations.
Do these coils include a drain pan and insulation?
Vertical cased coils include an insulated cabinet and corrosion-resistant drain pan. Review product details for materials and multi-position drain options.
What else should be replaced when swapping a coil?
Replace the filter-drier, verify or install the correct TXV/piston, pressure test, evacuate, and assess the line set for flushing or replacement if contaminated.