AC Zincs Corrosion Grenade 7/8" Clamp-On Zinc Sacrificial Anode, ACZ-7/8
The AC Zincs Corrosion Grenade ACZ-7/8 is a zinc sacrificial anode sized for 7/8" copper suction lines, a common size on larger residential and light-commercial outdoor units. Once it's clamped to the line, galvanic corrosion goes after the zinc instead of the outdoor coil's aluminum fins, helping slow salt-air damage and protect system efficiency. Protection starts the moment it's installed, and one anode lasts several years.
Is the 7/8" Corrosion Grenade the Right Size?
Choose the ACZ-7/8 when the compressor suction line measures 7/8" OD. Like every Corrosion Grenade, it's sized to the line diameter, not the equipment tonnage, so a quick measurement at the outdoor unit confirms the fit. AC Zincs also offers the 7/8" size in an aluminum-alloy Corrosion Grenade 2.0.
Systems on barrier islands, waterfront lots and in coastal commercial districts face the harshest conditions. Replacing a line set? Our Mueller 7/8" American-made copper suction line is available in 50 ft coils.
Ideal for: Coastal AC, heat pump and refrigeration systems with a 7/8" suction line, including larger homes and light-commercial units.
Need a larger size? Step up to the AC Zincs Corrosion Grenade 1 1/8" ACZ-1 1/8 for 1 1/8" suction lines.
Size the Corrosion Grenade to the measured outside diameter of the suction line. Results vary with environment, exposure and maintenance. Request product assistance, contact Budget Heating, or call 813-885-7999.
What's Included
| Product | AC Zincs Corrosion Grenade — ACZ-7/8 |
|---|---|
| Line Size | Fits 7/8" OD Copper Suction Line |
| Anode Material | Zinc Alloy Sacrificial Anode |
| Design | Two-Piece Clamp-On With Stainless Steel Bolts |
| Mounting Location | Compressor Suction Line, Where It Typically Remains Wet |
| Protects | Outdoor Coil Aluminum Fins From Galvanic Corrosion |
| Application | Air Conditioning and Refrigeration Systems in Coastal Environments |
| Manufacturing Standard | Manufactured to Strict U.S. Military Specifications |
Built for larger suction lines, the ACZ-7/8 uses the same two-piece zinc body and stainless steel hardware as the rest of the Corrosion Grenade line, with mass sized for a 7/8" line so it won't cause vibration. Contractors can install it in minutes during a routine maintenance call without opening the refrigerant circuit.
How It Works & Installation Features
ACZ-7/8 Corrosion Protection
- Zinc anode sized for 7/8" suction lines
- More active than aluminum on the galvanic scale
- Corrodes first, sparing aluminum coil fins
- Helps slow coil degradation in salt air
- Helps keep system efficiency up
- Protection begins immediately
- Several years of service life
- Manufactured to strict U.S. military specifications
- Suits AC, heat pump and refrigeration systems
- Pairs with coil cleaning and coatings
ACZ-7/8 Installation & Maintenance
- Clamp-on fit for 7/8" OD copper
- Allen wrench separates the two halves
- Stainless steel bolts hold it in place
- Sand the line to bare copper before mounting
- No labels or coatings under the anode
- Mount on the wet area of the suction line
- Weighted to avoid vibration
- No refrigerant handling required
- Replace when it loosens from deterioration
- Easy upsell on coastal service calls
Specifications & Manuals
The brochure details how the Corrosion Grenade uses sacrificial anode technology to protect aluminum coil fins, with the galvanic scale and size options.
Frequently Asked Questions
How can I tell when the ACZ-7/8 needs replacing?
As the zinc sacrifices itself, it wears away. AC Zincs recommends replacing the Corrosion Grenade once it becomes loose on the line from deterioration.
Does protection start right away?
Yes. AC Zincs states that protection begins immediately after the Corrosion Grenade is installed and lasts several years.
Can the 7/8" Corrosion Grenade be used on refrigeration equipment?
Yes. AC Zincs designs the Corrosion Grenade to help maintain the efficiency of both air conditioning and refrigeration systems with outdoor aluminum-fin coils.
Why is zinc a good sacrificial metal for AC coils?
On the galvanic scale, zinc is more active (less noble) than aluminum. Corrosion targets the most active metal, so the zinc anode corrodes in place of the coil fins.
Is the Corrosion Grenade worth adding during a maintenance visit?
AC Zincs positions it as an inexpensive add-on that helps extend outdoor coil life. Many coastal contractors add it to preventive maintenance as an extra value for customers.
Who typically uses the 7/8" Corrosion Grenade?
Contractors and owners of larger coastal homes, condos and light-commercial buildings with 7/8" suction lines.

Corrosion Grenade Borchure