decor decor
ACZ-5/8 | Let the Zinc Corrode, Not Your Coil

AC Zincs Corrosion Grenade 5/8" - ACZ-5/8

· SKU 37425
Average Rating:
List price: $35.00

Sale price:

$25.50
You save $9.50!
  • SKU: 37425
  • Availability:
    Usually Ships in 2 to 3 Business Days
  • Shipping:
    Calculated at Checkout
Adding to cart… The item has been added

AC Zincs Corrosion Grenade 5/8" Clamp-On Zinc Sacrificial Anode, ACZ-5/8

Salt air, humidity and the mix of copper, steel and aluminum in an outdoor unit create the conditions for galvanic corrosion, and the aluminum coil fins are the first to go. The AC Zincs Corrosion Grenade ACZ-5/8 interrupts that process. This zinc sacrificial anode clamps onto a 5/8" copper suction line and corrodes in place of the aluminum fins, helping extend coil life and preserve efficiency on air conditioners, heat pumps and refrigeration systems near the coast.

Is the 5/8" Corrosion Grenade the Right Size?

The ACZ-5/8 fits a 5/8" OD copper suction line. Always choose by the measured suction line size at the outdoor unit rather than by tonnage, because line sizes vary by equipment and installation. If the line is larger or smaller, choose the matching Corrosion Grenade size.

Units within sight of the ocean, near bays and canals, or exposed to sea spray see the fastest fin deterioration. For best results, install the anode where the suction line normally stays wet and keep up with routine coil maintenance. Browse our AC Zincs product lineup for every available size.

Ideal for: Coastal homes, condos and light-commercial AC and heat pump systems with a 5/8" suction line.

Need a larger size? Step up to the AC Zincs Corrosion Grenade 3/4" ACZ-3/4 for 3/4" suction lines.

Size the Corrosion Grenade to the measured outside diameter of the suction line. Results vary with environment, exposure and maintenance. Request product assistance, contact Budget Heating, or call 813-885-7999.

What's Included

Product AC Zincs Corrosion Grenade — ACZ-5/8
Line Size Fits 5/8" OD Copper Suction Line
Anode Material Zinc Alloy Sacrificial Anode
Design Two-Piece Clamp-On With Stainless Steel Bolts
Mounting Location Compressor Suction Line, Where It Typically Remains Wet
Protects Outdoor Coil Aluminum Fins From Galvanic Corrosion
Application Air Conditioning, Heat Pump and Refrigeration Systems Near the Coast
Manufacturing Standard Manufactured to Strict U.S. Military Specifications

Installation takes minutes and requires no refrigerant work. Sand the 5/8" line to bare copper, separate the two zinc halves with an Allen wrench, clamp them around the line and re-tighten the stainless steel bolts. AC Zincs notes that the anode often turns white within the first week. That's a sign galvanic corrosion is attacking the Corrosion Grenade instead of your coil.

How It Works & Installation Features

ACZ-5/8 Corrosion Protection

  • Zinc is less noble than aluminum on the galvanic scale
  • Sacrifices itself to protect aluminum coil fins
  • Slows salt-air electrolysis on outdoor units
  • Helps extend coil life near the coast
  • Helps keep cooling efficiency from declining
  • Protection starts immediately
  • Several years of service per anode
  • Built to strict U.S. military specifications
  • Works on AC, heat pump and refrigeration systems
  • Fits 5/8" OD copper suction lines

ACZ-5/8 Installation & Maintenance

  • Clamp-on design, no brazing or refrigerant recovery
  • Separate the halves with an Allen wrench
  • Stainless steel bolts resist corrosion
  • Sand cloth the line to bare copper first
  • Keep labels and coatings off the contact area
  • Install where the suction line stays wet
  • Sized and weighted to avoid vibration
  • A white surface shows the anode is working
  • Replace once the anode loosens from wear
  • Easy to add during routine service

Specifications & Manuals

The Corrosion Grenade brochure covers how galvanic corrosion damages AC coils, how sacrificial anodes stop it, and the full range of sizes.

Frequently Asked Questions

Where on the system should the ACZ-5/8 be installed?

Clamp it to the compressor suction line at the outdoor unit, at a spot where the line typically stays wet. The moisture completes the galvanic circuit so the anode can protect the coil.

How do I prepare the line before installing a Corrosion Grenade?

Use sand cloth to clean the copper down to bare metal, and make sure no labels, insulation or coatings remain where the anode will contact the line.

Why does the Corrosion Grenade turn white after installation?

AC Zincs explains that the white surface comes from galvanic corrosion attacking the zinc anode. It shows the Corrosion Grenade is absorbing the corrosion instead of the aluminum fins.

Why do AC coil fins corrode so quickly near the ocean?

An outdoor unit combines copper, steel and aluminum, carries electrical power, and is surrounded by moist salt air that acts as an electrolyte. Galvanic corrosion then attacks the most active metal, the aluminum fins, as soon as the system starts running.

What tools are needed to install the ACZ-5/8?

An Allen wrench to separate and re-tighten the stainless steel bolts, plus sand cloth to clean the copper line to bare metal.

Who usually installs 5/8" Corrosion Grenades?

HVAC service companies adding coastal protection during maintenance visits, plus homeowners and condo associations with outdoor units near salt water.

Customer Review

You Might Also Like