AC Zincs Corrosion Grenade 1/2" Clamp-On Zinc Sacrificial Anode, ACZ-1/2
According to AC Zincs, an outdoor coil's aluminum fins start to deteriorate as soon as a coastal system starts running. The AC Zincs Corrosion Grenade ACZ-1/2 is built to fight that from day one. This zinc sacrificial anode clamps onto a 1/2" copper suction line and gives galvanic corrosion a more active metal to attack than the aluminum fins. That helps extend coil life and preserve efficiency on air conditioning and refrigeration systems exposed to salt air.
Is the 1/2" Corrosion Grenade the Right Size?
The ACZ-1/2 fits a 1/2" OD copper suction line, between the 3/8" and 5/8" sizes in the zinc Corrosion Grenade range. Sizing is based on the measured suction line at the outdoor unit, not on system tonnage, so check the line diameter before ordering.
The closer equipment sits to salt water, the faster unprotected fins break down. Adding a Corrosion Grenade at installation or at the next service visit, along with routine cleaning using our coil cleaner and maintenance products, helps the coil last longer.
Ideal for: Coastal AC and refrigeration systems with a 1/2" suction line, from new installations to existing equipment.
Need a larger size? Step up to the AC Zincs Corrosion Grenade 5/8" ACZ-5/8 for 5/8" suction lines, or choose the 3/8" ACZ-3/8 for smaller lines.
Size the Corrosion Grenade to the measured outside diameter of the suction line. Results vary with environment, exposure and maintenance. Request product assistance, contact Budget Heating, or call 813-885-7999.
What's Included
| Product | AC Zincs Corrosion Grenade — ACZ-1/2 |
|---|---|
| Line Size | Fits 1/2" OD Copper Suction Line |
| Anode Material | Zinc Alloy Sacrificial Anode |
| Design | Two-Piece Clamp-On With Stainless Steel Bolts |
| Mounting Location | Compressor Suction Line, Where It Typically Remains Wet |
| Protects | Outdoor Coil Aluminum Fins From Galvanic Corrosion |
| Application | Air Conditioning and Refrigeration Systems in Coastal Environments |
| Manufacturing Standard | Manufactured to Strict U.S. Military Specifications |
The ACZ-1/2 shares the proven Corrosion Grenade design. Two zinc halves separate with an Allen wrench, clamp around bare copper on the suction line, and lock down with stainless steel bolts. It's sized and weighted for a 1/2" line so it won't cause vibration. Protection begins immediately and lasts several years, and AC Zincs recommends replacing the anode once it loosens from deterioration.
How It Works & Installation Features
ACZ-1/2 Corrosion Protection
- Zinc anode sized for 1/2" suction lines
- More active than aluminum, so it corrodes first
- Helps shield aluminum fins from salt-air electrolysis
- Helps extend outdoor coil life
- Helps maintain AC and refrigeration efficiency
- Best installed at system startup or the next service visit
- Protection begins immediately
- Several years of service per anode
- Manufactured to strict U.S. military specifications
- Complements coil cleaning and coatings
ACZ-1/2 Installation & Maintenance
- Clamp-on fit for 1/2" OD copper
- Allen wrench opens the two-piece body
- Stainless steel bolts secure the clamp
- Clean the line to bare copper before mounting
- No labels or coatings under the anode
- Mount on the wet section of the suction line
- Correct size and weight to avoid vibration
- No refrigerant work required
- Replace when the anode becomes loose
- Quick add-on for coastal maintenance visits
Specifications & Manuals
The brochure explains galvanic corrosion in AC systems, the sacrificial anode principle, the galvanic scale and the full range of Corrosion Grenade sizes, including 1/2".
Frequently Asked Questions
What suction line does the ACZ-1/2 fit?
It fits a 1/2" outside-diameter copper suction line. If your line measures 3/8" or 5/8", choose the ACZ-3/8 or ACZ-5/8 instead.
When is the best time to install a Corrosion Grenade?
As early as possible. AC Zincs notes that galvanic corrosion begins attacking aluminum fins as soon as a coastal system starts running, so installing at startup or the next maintenance visit gives the most protection.
What conditions cause galvanic corrosion on an AC unit?
Three things together: dissimilar metals (copper, steel and aluminum), electrical power, and an electrolyte, which near the coast is moist salt air.
Can a homeowner ask their contractor to add a Corrosion Grenade?
Yes. AC Zincs encourages homeowners to ask their AC contractor to install one. It clamps onto the existing suction line without opening the refrigerant system.
Is the 1/2" Corrosion Grenade available in aluminum?
No. The 1/2" size comes in zinc only. AC Zincs offers its aluminum-alloy Corrosion Grenade 2.0 in 3/4" and 7/8" sizes.
Who typically buys the 1/2" Corrosion Grenade?
Coastal homeowners and landlords, condo associations and HVAC contractors protecting AC and refrigeration equipment with 1/2" suction lines.

Corrosion Grenade Borchure