decor decor
ACZ-3/4 | Marine-Proven Anode Science for Your AC

AC Zincs Corrosion Grenade 3/4" - ACZ-3/4

· SKU 37426
Average Rating:
List price: $35.00

Sale price:

$24.50
You save $10.50!
  • SKU: 37426
  • Availability:
    Usually Ships in 2 to 3 Business Days
  • Shipping:
    Calculated at Checkout
Adding to cart… The item has been added

AC Zincs Corrosion Grenade 3/4" Clamp-On Zinc Sacrificial Anode, ACZ-3/4

Water heaters and marine engines have relied on sacrificial anodes for generations. The AC Zincs Corrosion Grenade ACZ-3/4 brings that same science to air conditioning. This zinc-alloy anode clamps onto a 3/4" copper suction line and becomes the preferred target for galvanic corrosion, helping protect the outdoor coil's aluminum fins in coastal environments. It's an inexpensive, long-lasting way for homeowners and service contractors to help protect a major investment.

Is the 3/4" Corrosion Grenade the Right Size?

The ACZ-3/4 fits a 3/4" OD copper suction line. Measure the suction line at the outdoor unit and match the Corrosion Grenade to that size. AC Zincs makes the 3/4" size in both zinc (this model) and an aluminum-alloy Corrosion Grenade 2.0.

Corrosion protection matters most where salt spray, sea breezes and high humidity are constant. If you're replacing or extending a line set, our Mueller 3/4" American-made copper line pairs well with a new Corrosion Grenade.

Ideal for: Coastal residential and light-commercial AC, heat pump and refrigeration systems with a 3/4" suction line.

Need a larger size? Step up to the AC Zincs Corrosion Grenade 7/8" ACZ-7/8 for 7/8" suction lines.

Size the Corrosion Grenade to the measured outside diameter of the suction line. Results vary with environment, exposure and maintenance. Request product assistance, contact Budget Heating, or call 813-885-7999.

What's Included

Product AC Zincs Corrosion Grenade — ACZ-3/4
Line Size Fits 3/4" OD Copper Suction Line
Anode Material Zinc Alloy Sacrificial Anode
Design Two-Piece Clamp-On With Stainless Steel Bolts
Mounting Location Compressor Suction Line, Where It Typically Remains Wet
Protects Outdoor Coil Aluminum Fins From Galvanic Corrosion
Application Air Conditioning, Heat Pump and Refrigeration Systems in Coastal Areas
Manufacturing Standard Manufactured to Strict U.S. Military Specifications

The ACZ-3/4 installs like every Corrosion Grenade: clean the line to bare copper, open the two zinc halves with an Allen wrench, position them on the wet section of the suction line and tighten the stainless steel bolts. Protection begins right away and typically lasts several years. Replace the anode once it loosens from deterioration.

How It Works & Installation Features

ACZ-3/4 Corrosion Protection

  • Zinc-alloy anode in the popular 3/4" size
  • Same anode principle used in water heaters and marine engines
  • Becomes the target for galvanic corrosion
  • Helps preserve outdoor coil aluminum fins
  • Helps maintain system efficiency over time
  • Protection begins immediately after installation
  • Lasts several years in service
  • Made to strict U.S. military specifications
  • Complements coil cleaning and protective coatings
  • Fits 3/4" OD copper suction lines

ACZ-3/4 Installation & Maintenance

  • Clamp-on installation in minutes
  • Two-piece body opens with an Allen wrench
  • Corrosion-resistant stainless steel bolts
  • Sand cloth to bare copper for solid contact
  • Remove labels and coatings from the mounting area
  • Mount on the wet section of the suction line
  • Correct size and weight to prevent vibration
  • No electrical connections or refrigerant work
  • Replace when the anode becomes loose
  • Great add-on for coastal maintenance agreements

Specifications & Manuals

Review the Corrosion Grenade brochure for the science behind sacrificial anodes, the galvanic scale, and available sizes and materials.

Frequently Asked Questions

What's the difference between the zinc and aluminum 3/4" Corrosion Grenades?

The ACZ-3/4 is the original zinc-alloy Corrosion Grenade. AC Zincs also makes the Corrosion Grenade 2.0 in aluminum alloy for 3/4" and 7/8" lines. Both are more active than the aluminum fins, so both act as sacrificial anodes.

How long does a Corrosion Grenade last?

AC Zincs states that protection lasts several years. Actual life depends on how harsh the salt-air exposure is. Replace the anode when it becomes loose from deterioration.

Is the Corrosion Grenade built to a recognized standard?

Yes. AC Zincs manufactures the Corrosion Grenade to strict U.S. military specifications.

Can the ACZ-3/4 go on the liquid line instead of the suction line?

AC Zincs specifies the compressor suction line, at a spot where it typically remains wet, and sizing is based on the suction line diameter. Follow the manufacturer's placement for best results.

Is a Corrosion Grenade like a water heater anode rod?

The principle is the same. Water heaters use sacrificial anodes to protect their tanks, and marine engines use zinc anodes too. The Corrosion Grenade applies that technology to an AC system's outdoor coil.

Who typically buys the 3/4" Corrosion Grenade?

Homeowners in beachfront and waterfront neighborhoods, condo associations, and contractors servicing coastal residential and light-commercial systems.

Customer Review

You Might Also Like