5 Ton Bosch IDS Edge 15.5 SEER2 R-454B Side Discharge Heat Pump Inverter System, BOHA-60RTB-M18S, BIVA-60RCB-M20X
This 5 ton Bosch IDS Edge system is the largest Edge system, pairing the BOHA-60RTB-M18S side discharge condenser with the five-row BIVA-60RCB-M20X IDS Premium air handler. AHRI Reference No. 218160623 certifies it at 52,000 BTU/h of cooling and 54,000 BTU/h of heating, 15.5 SEER2 and 8.5 HSPF2 (Region IV). At 5°F it still produces about 42,000 BTU/h with a 1.95 COP. The outdoor unit is only 15.7" deep, so large homes can get full 5 ton R-454B heat pump capacity without giving up yard space to a wide, square condenser.
Is a 5 Ton Side Discharge Heat Pump System the Right Size?
With 52,000 BTU/h of cooling and 54,000 BTU/h of heating, this system targets large homes with heavy loads. Its heating capacity exceeds its cooling, which helps where winter drives the design, and it keeps operating down to -13°F.
Large-home sizing should start with a Manual J at both design extremes and a duct evaluation. If the load or the duct capacity comes in smaller, the 4 ton Edge system on the same condenser offers higher efficiency at 16.5 SEER2.
Ideal for: Large homes with narrow side yards or limited pad space, two-story homes with high loads, and 5 ton replacements converting to R-454B.
Need less capacity? Consider the 4 Ton Bosch IDS Edge 16.5 SEER2 Side Discharge Heat Pump Inverter System, BOHA-60RTB-M18S, BIVA-48RCB-M20X, which uses the same condenser.
Recommended applications are general guidelines only. Actual system requirements depend on insulation, climate, ductwork, air leakage, window area and occupancy. Request free sizing assistance, contact Budget Heating, or call 813-885-7999.
What's Included
| Outdoor Condensing Unit | BOHA-60RTB-M18S — 5 Ton IDS Edge Side Discharge Heat Pump Inverter Condenser |
|---|---|
| Indoor Air Handler | BIVA-60RCB-M20X — 5 Ton IDS Premium Series Multi-Position Air Handler |
| Application | Single-Zone Ducted Split-System Heat Pump, Heating & Cooling |
| AHRI Rated Performance | 52,000 BTU/h Cooling / 54,000 BTU/h Heating — 15.5 SEER2, 8.5 HSPF2 Region IV (AHRI No. 218160623) |
| Cold Weather Heating | About 42,000 BTU/h at 5°F (78%), 1.95 COP — Operates to -13°F |
| Refrigerant | R-454B (A2L) with A2L Refrigerant Sensor in Air Handler |
| Compressor | Inverter Rotary Compressor, 18%–110% Modulation |
| Electrical | 208-230V, Single Phase, 60 Hz Condensing Unit — 35.0 MCA / 40 A Max |
| Air Handler Electrical | 208-230V, Single Phase — 7.0 MCA / 15 A Max (without heat kit) |
| Line Set Size | 3/8" Liquid x 7/8" Vapor (not included) |
The system combines the BOHA-60RTB-M18S Edge condenser with the BIVA-60RCB-M20X air handler, whose five-row coil is the deepest in the Premium Series. For backup heat, add the 15 kW EHK-15B or 20 kW EHK-20B heat strip, and connect the units with a 3/8" x 7/8" copper line set.
Condensing Unit & Air Handler Features
BOHA-60RTB-M18S Outdoor Condensing Unit
- Full 5 ton capacity in a 15.7" deep side discharge cabinet
- Dual ECM fan motors and 11.8 sq. ft., 2.5-row coil
- Inverter compressor modulates 18%–110% in 1% increments
- Heats to -13°F; cools from 5°F to 125°F
- Built-in base pan heater and crankcase heater
- Compressor sound blanket; rated at 61 dB(A) at full load
- Copper tube coil with hydrophilic aluminum fins
- Steel louver coil guard and powder paint finish
- Line runs up to 164 ft and 98 ft elevation with IDS Premium AHU
- 38.5" W x 52.2" H, 238 lbs. net
BIVA-60RCB-M20X Premium Series Air Handler
- Five-row all-aluminum evaporator coil
- 3/4 HP constant-torque ECM blower for two-stage operation
- Single-zone PQ communication with the Edge condenser
- A2L refrigerant sensor and factory-installed TXV
- Accepts Bosch EHK-05B through EHK-20B heat kits
- Upflow or horizontal right standard; field convertible
- Factory-sealed cabinet at 2% or less air leakage
- 20" x 22" filter in a tool-less rack
- Sound level of 68.5 dB(A) on low speed
- 54-1/2" x 22" x 24" cabinet, 160 lbs. net
Specifications & Manuals
Product documentation includes condenser and air handler technical specifications, installation instructions, parts lists, the IDS Edge brochure and the Bosch product catalog to help with equipment selection, installation and service.
Frequently Asked Questions
How does the 5 ton Edge system differ from the 4 ton on the same condenser?
The 5 ton system swaps in the five-row BIVA-60RCB-M20X air handler, which raises cooling from 48,000 to 52,000 BTU/h and heating from 48,000 to 54,000 BTU/h. Efficiency is 15.5 SEER2 versus 16.5 SEER2 for the 4 ton pairing.
How much heat does the 5 ton Edge system deliver in cold weather?
Bosch rates this pairing at about 42,000 BTU/h at 5°F, roughly 78% of its 54,000 BTU/h rating, with a 1.95 COP. The condenser keeps heating down to -13°F, and the air handler accepts up to 20 kW of electric backup heat.
How much do the two units weigh?
The BOHA-60RTB-M18S weighs 238 lbs. net and the BIVA-60RCB-M20X weighs 160 lbs. net, for a combined 398 lbs. before packaging. The condenser's tall, slim shape calls for a secure pad or mounting per Bosch's installation instructions.
What circuits does the 5 ton Edge system require?
The condenser needs 35.0 MCA with 40 A maximum overcurrent protection. The air handler needs 7.0 MCA on a 15 A circuit without electric heat. The EHK-15B and EHK-20B heat kits are dual-circuit and add their own supply requirements.
Can the 5 ton Edge system be set up for remote monitoring?
Yes, with the optional IDS Gateway Accessory (Part No. 8733982717) and the Bosch EasyAir app. Bosch states that gateway connectivity works when the condenser is installed with an IDS Premium air handler, which this system includes.
What AHRI number covers the 5 ton IDS Edge system?
The BOHA-60RTB-M18S and BIVA-60RCB-M20X combination is listed under AHRI Reference No. 218160623 at 15.5 SEER2 and 8.5 HSPF2 (Region IV).
Bosch IDS Edge Condenser Technical Specifications
Bosch IDS Edge Condenser Installation Instructions
Bosch IDS Edge Condenser Parts List
BIVA20 R454B Technical Specifications
BIVA20 R454B Installation Manual
