5 Ton Bosch IDS Edge R-454B Side Discharge Heat Pump Inverter Condenser, BOHA-60RTB-M18S
The Bosch BOHA-60RTB-M18S is the largest IDS Edge side discharge heat pump. It delivers 52,000 BTU/h of nominal cooling and 54,000 BTU/h of nominal heating from a cabinet only 15.7" deep. Two ECM fans push air across an 18%-to-110% modulating inverter compressor's 11.8 sq. ft. coil, and the unit runs down to -13°F. Bosch AHRI-rates it with both the 4 ton BIVA-48RCB-M20X (16.5 SEER2) and the 5 ton BIVA-60RCB-M20X (15.5 SEER2) IDS Premium air handlers, so one condenser covers 4 and 5 ton homes. It can also run a VRF-style multi-zone layout for larger homes that need big capacity without a big footprint.
Is a 5 Ton Side Discharge Heat Pump the Right Size?
The BOHA-60RTB-M18S spans 4 to 5 tons depending on the indoor unit. With the BIVA-48RCB-M20X it's rated at 48,000 BTU/h for cooling and heating, and 39,000 BTU/h at 5°F. With the BIVA-60RCB-M20X it delivers 52,000 BTU/h cooling, 54,000 BTU/h heating and 42,000 BTU/h at 5°F.
For large homes, start with a Manual J at both summer and winter design conditions, then confirm the ductwork can handle 4 or 5 ton airflow. The 4 ton pairing offers higher efficiency at 16.5 SEER2. The 5 ton pairing adds capacity where the load requires it.
Ideal for: Larger homes with tight side yards or limited pad space, 4 and 5 ton single-zone systems, and larger multi-zone layouts using Bosch Edge indoor units.
Need less capacity? Consider the 3 Ton Bosch IDS Edge R-454B Side Discharge Heat Pump Inverter Condenser, BOHA-36RTB-M18S for homes needing about 36,000 BTU/h of heating.
Recommended applications are general guidelines only. Actual system requirements depend on insulation, climate, ductwork, air leakage, window area and occupancy. Request free sizing assistance, contact Budget Heating, or call 813-885-7999.
What's Included
| Outdoor Unit | BOHA-60RTB-M18S — 5 Ton IDS Edge Side Discharge Heat Pump Inverter Condenser (Bosch Part No. 8733982288) |
|---|---|
| Indoor Unit | Sold separately — IDS Premium BIVA-48RCB-M20X (4 ton) or BIVA-60RCB-M20X (5 ton) |
| Application | Single-Zone or Multi-Zone Split-System Heat Pump, Heating & Cooling |
| Refrigerant | R-454B (A2L) — factory charged for 25 ft of 3/8" liquid line |
| Compressor | Inverter Rotary Compressor, 18%–110% Modulation in 1% Steps |
| Outdoor Fans | Dual ECM Fan Motors (2 x 5/32 HP), Side Discharge |
| Electrical | 208/230V, Single Phase, 60 Hz — 35.0 MCA / 40 A Max Overcurrent Protection |
| Line Sizes | 3/8" Liquid / 7/8" Vapor Line — 3/8" and 3/4" Flare Service Valves |
| Dimensions / Weight | 38.5" W x 15.7" D x 52.2" H — 238 lbs. net |
This listing is for the outdoor condenser only. For 4 tons, pair it with the BIVA-48RCB-M20X air handler or choose the 4 Ton IDS Edge 16.5 SEER2 system. For 5 tons, use the BIVA-60RCB-M20X air handler or the 5 Ton IDS Edge 15.5 SEER2 system. Dual-fuel matchups with the BMAC4860DBTA cased coil and a Bosch BGH97 furnace are also AHRI-rated.
Condenser Features & Matched Indoor Options
BOHA-60RTB-M18S Outdoor Inverter Condenser
- 52,000 BTU/h nominal cooling and 54,000 BTU/h nominal heating
- Slim 15.7" deep side-discharge cabinet
- Dual ECM fan motors across an 11.8 sq. ft. coil
- Inverter compressor modulates 18%–110% in 1% increments
- Heating to -13°F; cooling from 5°F to 125°F
- Built-in base pan heater and crankcase heater
- Compressor sound blanket; rated at 61 dB(A) at full load
- Intelligent Oil Return Technology and EEV
- Coil rated to a 1,000-hour ASTM B117 salt spray test
- Florida Building Code 2010 wind load compliant
Indoor Pairings & System Flexibility
- BIVA-48RCB-M20X: 48,000 BTU/h, 16.5 SEER2, 9 HSPF2, 39,000 BTU/h at 5°F
- BIVA-60RCB-M20X: 52,000 BTU/h cooling, 15.5 SEER2, 42,000 BTU/h at 5°F
- Single-zone IDS Premium installs use PQ communication
- 164 ft line length and 98 ft elevation with IDS Premium AHU
- Multi-zone capable with Bosch Edge indoor units
- Up to 984 ft total piping in multi-zone Edge systems
- BMAC4248 and BMAC4860 coils with BGH97 furnaces for dual fuel
- Compatible with standard 24 VAC heat pump thermostats
- Run 3/8" x 7/8" copper line sets to the indoor unit
- 10-year residential limited warranty
Specifications & Manuals
Product documentation includes technical specifications with AHRI matchup data, installation instructions, a spare parts list and the IDS Edge brochure to help with equipment selection, installation and service.
Frequently Asked Questions
Does the BOHA-60RTB-M18S work for both 4 ton and 5 ton systems?
Yes. Bosch AHRI-rates it with the 4 ton BIVA-48RCB-M20X at 48,000 BTU/h and 16.5 SEER2, and with the 5 ton BIVA-60RCB-M20X at 52,000 BTU/h cooling, 54,000 BTU/h heating and 15.5 SEER2.
How does the 5 ton Edge compare with the 3 ton BOHA-36RTB-M18S?
The 5 ton adds about 18,000 BTU/h of capacity and uses dual fan motors instead of a single fan. It's taller at 52.2" but slimmer at only 15.7" deep. It steps up to a 7/8" vapor line and needs a 40 A circuit instead of 30 A.
How does a 5 ton side discharge unit fit in tight spaces?
Instead of a wide, square cabinet, the BOHA-60RTB-M18S stands 52.2" tall with a footprint of just 38.5" by 15.7". Air discharges from the side, so it can sit close to a wall in narrow side yards and small pad areas where a traditional 5 ton condenser won't fit.
What heating capacity does the 5 ton Edge deliver at 5°F?
Bosch rates the 5 ton pairing at about 42,000 BTU/h at 5°F (78% of capacity) and the 4 ton pairing at about 39,000 BTU/h (81%), both with a 1.95 COP. The condenser operates in heating mode down to -13°F.
What are the line set limits when paired with an IDS Premium air handler?
With an IDS Premium AHU, Bosch allows up to 164 ft of total refrigerant pipe and a 98 ft height difference between the outdoor and indoor units. The unit is factory charged for 25 ft of 3/8" liquid line, so longer runs need a charge adjustment.
Does the IDS Edge include remote monitoring?
Remote monitoring through the Bosch EasyAir app requires the optional IDS Gateway Accessory (Part No. 8733982717). Bosch notes that gateway connectivity works with an IDS Premium air handler, a BMXF modular blower or a BGH97 furnace.
Bosch IDS Edge Condenser Technical Specifications
Bosch IDS Edge Condenser Installation Instructions
