2 Ton Goodman R32 Ceiling Mount Pancake Air Handler with 10 kW Heat Strip, ACST24LU1310AA
For 2-ton homes that can't skimp on heat, the Goodman ACST24LU1310AA ships with a 10 kW electric heat strip factory installed, the largest heater offered for the 2-ton ACST. It produces about 31,300 BTU/h of electric heat at 230V, roughly double the 5 kW version. Add 24,000 BTU/h of nominal R-32 cooling in a 6½"-tall ceiling cabinet, and it's a strong choice for homes with cold winters, older or less-insulated condos, and straight-cool systems that rely entirely on electric resistance heat.
Is a 2 Ton Air Handler with 10 kW Heat the Right Size?
The 2-ton cooling side is the same as the rest of the ACST24 family: up to about 934 CFM through the L cabinet. The 10 kW strip makes sense when the home's heat loss is high relative to its cooling load. That's common with large windows, exterior-facing units, older construction, or long stretches of below-freezing weather.
More heat means a heavier circuit. This model calls for 54.6A MCA and a 60A maximum breaker at 230V (47.6A and 50A at 208V). Make sure your electrical panel and wiring can handle it, and check a heat-loss calculation to confirm you need 10 kW rather than 8 kW.
Ideal for: 2-ton homes and condos with cold winters, high heat loss, or straight-cool systems that depend on electric heat, and that need a low-profile ceiling mount air handler.
Need more capacity? Step up to the 2.5 Ton Goodman ACST30LU1310AA with 10 kW Heat for more cooling capacity with the same heat strip.
Recommended applications are general guidelines only. Actual system requirements depend on home size, insulation, climate, ductwork, and the matched outdoor unit. Request free sizing assistance, contact Budget Heating, or call 813-885-7999.
What's Included
| Air Handler | Goodman ACST24LU1310AA — 2 Ton Ceiling Mount Pancake Air Handler |
|---|---|
| Heat Strip | 10 kW Electric Heat, Factory Installed (approx. 31,300 BTU/h at 230V) |
| Cooling Capacity | 24,000 BTU/h Nominal (2 Ton) |
| Refrigerant | R-32 |
| Metering Device | Factory-Installed, Fully Adjustable TXV |
| Electrical | 208/230V, Single Phase, 60 Hz |
| MCA / Max Breaker | 54.6A / 60A at 230V; 47.6A / 50A at 208V |
| Max Airflow | Approx. 934 CFM (T4/T5, 0.1" ESP) |
| Line Connections | 3/8" Liquid, 3/4" Suction |
| Warranty | 10-Year Parts Limited (online registration required) |
The ACST24LU1310AA comes with its 10 kW heater kit, TXV, R-32 sensor, pull-type disconnect, and mounting brackets factory installed. A matching ceiling access panel is available in the options above. For the refrigerant connections, our 25' copper line set in 3/4" and 3/8" matches this unit's connection sizes. Confirm final line sizing with your outdoor unit's instructions.
Air Handler & Heat Strip Features
ACST24LU1310AA Ceiling Mount Air Handler
- 2-ton R-32 ceiling mount air handler with maximum heat
- 6½"-tall L cabinet built for shallow ceiling spaces
- Multi-speed ECM blower up to about 934 CFM
- Factory-installed, adjustable TXV
- Factory R-32 sensor rated for the life of the coil
- All-aluminum high-efficiency coil
- Front or bottom return, set up in the field
- Free-return (non-ducted return) capable
- Designed, engineered, and assembled in the USA
- 10-year parts limited warranty with registration within 60 days
Factory-Installed 10 kW Electric Heat Strip
- 10 kW heater kit, the largest available for the 2-ton ACST
- Approx. 31,300 BTU/h of electric heat at 230V
- About double the heat of the 5 kW ACST24 model
- Sequence-controlled nickel chromium elements
- Rust-resistant element construction
- 60A max breaker at 230V; 50A at 208V
- 54.6A MCA at 230V; 47.6A at 208V
- Factory-installed pull-type disconnect
- Built for cold winters and high heat loss
- Shop the full ceiling mount pancake air handler lineup
Specifications & Manuals
Documents include the 10 kW heater electrical ratings, wiring diagrams and installation guidance, 2-ton airflow tables, and service parts for the ACST24LU1310AA.
Frequently Asked Questions
What makes the ACST24LU1310AA the highest-heat 2-ton ACST?
It ships with a factory-installed 10 kW heat strip, the largest heater offered for the 2-ton ACST, rated at about 31,300 BTU/h at 230V.
What wiring ratings does the 10 kW model need?
Goodman lists 54.6A MCA with a 60A maximum breaker at 230V, and 47.6A MCA with a 50A maximum at 208V.
Does the ACST24LU1310AA have a built-in disconnect?
Yes. A pull-type disconnect is factory installed. Always follow local code for any additional disconnect requirements.
How do the 10 kW heating elements turn on?
Goodman uses sequence-controlled elements, which bring the heat on in stages instead of drawing the full load all at once.
Is 10 kW too much heat for a 2-ton home?
It depends on heat loss. Homes with cold winters or poor insulation often benefit from it, while mild-climate homes may do fine with 5 or 8 kW. Request sizing help if you're unsure.
What warranty comes with the ACST24LU1310AA?
Goodman offers a 10-year parts limited warranty when the unit is registered online within 60 days of installation. Availability varies by state or province.
ACST Technical Specifications
