2 Ton Bosch IDS Edge 16.7 SEER2 R-454B Side Discharge Heat Pump Inverter System, BOHA-24RTB-M18S, BIVA-24RCB-M20X
This matched Bosch IDS Edge system pairs the slim BOHA-24RTB-M18S side discharge inverter condenser with the BIVA-24RCB-M20X IDS Premium air handler. It's built for smaller homes where outdoor space is tight. Certified under AHRI Reference No. 218160620, the pair delivers 23,000 BTU/h of cooling and 24,000 BTU/h of heating at 16.7 SEER2 and 8.5 HSPF2 (Region IV). The outdoor unit is only 16.8" deep, its inverter compressor modulates from 18% to 110% in 1% steps, and it heats down to -13°F. Indoors, a two-stage ECM blower and factory TXV round out an R-454B system that fits narrow side yards, zero-lot-line homes and condos.
Is a 2 Ton Side Discharge Heat Pump System the Right Size?
The system is rated at about 23,000 BTU/h of cooling and 24,000 BTU/h of heating, which typically suits condos, townhomes, smaller homes and additions. At 5°F it still delivers about 17,500 BTU/h of heat, roughly 73% of its rated capacity, with a 1.8 COP.
A Manual J load calculation confirms whether 2 tons fits, and in colder regions it shows how much backup heat you'll need on the coldest days. The air handler accepts Bosch heat kits from 5 to 10 kW for supplemental or emergency heat.
Ideal for: Condos and townhomes, zero-lot-line and narrow side-yard homes, additions and smaller homes that need a compact 2 ton R-454B system.
Need more capacity? Step up to the 3 Ton Bosch IDS Edge 16.5 SEER2 Side Discharge Heat Pump Inverter System, BOHA-36RTB-M18S, BIVA-36RCB-M20X for homes needing about 36,000 BTU/h.
Recommended applications are general guidelines only. Actual system requirements depend on insulation, climate, ductwork, air leakage, window area and occupancy. Request free sizing assistance, contact Budget Heating, or call 813-885-7999.
What's Included
| Outdoor Condensing Unit | BOHA-24RTB-M18S — 2 Ton IDS Edge Side Discharge Heat Pump Inverter Condenser |
|---|---|
| Indoor Air Handler | BIVA-24RCB-M20X — 2 Ton IDS Premium Series Multi-Position Air Handler |
| Application | Single-Zone Ducted Split-System Heat Pump, Heating & Cooling |
| AHRI Rated Performance | 23,000 BTU/h Cooling / 24,000 BTU/h Heating — 16.7 SEER2, 8.5 HSPF2 Region IV (AHRI No. 218160620) |
| Cold Weather Heating | About 17,500 BTU/h at 5°F (73%), 1.8 COP — Operates to -13°F |
| Refrigerant | R-454B (A2L) with A2L Refrigerant Sensor in Air Handler |
| Compressor | Inverter Rotary Compressor, 18%–110% Modulation |
| Electrical | 208-230V, Single Phase, 60 Hz Condensing Unit — 16.0 MCA / 25 A Max |
| Air Handler Electrical | 208-230V, Single Phase — 3.3 MCA / 15 A Max (without heat kit) |
| Line Set Size | 3/8" Liquid x 3/4" Vapor (not included) |
The package includes the BOHA-24RTB-M18S Edge condenser and the BIVA-24RCB-M20X air handler, connected in single-zone mode over Bosch's PQ communication terminals. With an IDS Premium air handler, refrigerant lines can run up to 164 ft with a 98 ft height difference. Backup heat options include the 5 kW EHK-05B and 10 kW EHK-10B Bosch heat strips.
Condensing Unit & Air Handler Features
BOHA-24RTB-M18S Outdoor Condensing Unit
- Side discharge cabinet only 16.8" deep (39.2" W x 28.0" H)
- Inverter compressor modulates 18%–110% in 1% steps
- Heating operation to -13°F; cooling from 5°F to 125°F
- Built-in base pan heater and crankcase heater
- 10-speed ECM fan and compressor sound blanket
- Rated at 56 dB(A) at full load
- Salt-spray-tested coil with hydrophilic aluminum fins
- Florida Building Code 2010 wind load compliant
- Flare service valves: 3/8" liquid, 5/8" vapor
- 121 lbs. net
BIVA-24RCB-M20X Premium Series Air Handler
- 1/3 HP constant-torque ECM blower designed for two-stage operation
- PQ communication with the Edge condenser in single-zone mode
- A2L refrigerant sensor and factory-installed TXV
- All-aluminum, 4-row evaporator coil
- Accepts Bosch EHK-05B, EHK-08B and EHK-10B heat kits
- Upflow or horizontal right standard; converts to horizontal left or downflow
- Cabinet sealed to 2% or less air leakage
- 18" x 20" filter in an integrated tool-less rack
- Sound level of 55.8 dB(A) on low speed
- 46-1/2" tall cabinet, 118 lbs. net
Specifications & Manuals
Product documentation includes condenser and air handler technical specifications, installation instructions, parts lists, the IDS Edge brochure and the Bosch product catalog to help with equipment selection, installation and service.
Frequently Asked Questions
Is the BOHA-24RTB-M18S and BIVA-24RCB-M20X system AHRI certified?
Yes. The pairing is listed under AHRI Reference No. 218160620 at 16.7 SEER2 and 8.5 HSPF2 (Region IV), with 23,000 BTU/h of cooling and 24,000 BTU/h of heating.
How does the 2 ton IDS Edge system compare with the 3 ton IDS Edge system?
The 3 ton system delivers 34,000 BTU/h cooling and 36,000 BTU/h heating and holds 83% of its heat at 5°F, compared with 73% for the 2 ton. The 2 ton has the slightly higher SEER2 (16.7 versus 16.5), a smaller 121 lb. condenser and a 25 A outdoor circuit.
Why choose a side discharge system over a standard condenser?
The Edge condenser is tall and narrow, only 16.8" deep, and blows air out the side instead of the top. It fits narrow side yards, tight pad spaces and spots near walls where a square top-discharge unit won't fit or would block a walkway.
Which components do I still need to complete this system?
Plan for a 3/8" x 3/4" line set, an 18" x 20" filter, a condenser pad or wall bracket, electrical disconnects and a 24 VAC heat pump thermostat. Add a 5 to 10 kW Bosch heat kit if your climate calls for backup heat.
How do the condenser and air handler communicate?
When the Edge outdoor unit is paired with an IDS Premium air handler, it runs as a single-zone system wired through the PQ terminals on both units. Bosch's installation instructions include the thermostat wiring diagrams for this setup.
Can I add more indoor zones to this system later?
Bosch notes that when the Edge condenser is paired with an IDS Premium air handler, it operates as a single-zone system. Multi-zone layouts require Bosch's Edge multi-zone indoor units and should be planned as a separate system design.
Bosch IDS Edge Condenser Technical Specifications
Bosch IDS Edge Condenser Installation Instructions
Bosch IDS Edge Condenser Parts List
BIVA20 R454B Technical Specifications
BIVA20 R454B Installation Manual
