decor decor
5KCP39PGS618S, 3730 | Discontinued Genteq Any-Angle 1/2 HP Condenser Motor – Our Very Last One at Closeout Pricing

Genteq Condenser Motor 1/2HP 208-230v 1075RPM, 5KCP39PGS618S

· SKU FLcloseout45
Average Rating:
List price: $299.00

Sale price:

$99.00
You save $200.00!
  • SKU: FLcloseout45
  • Availability:
    Usually Ships in 2 to 3 Business Days
  • Shipping:
    Calculated at Checkout
Adding to cart… The item has been added

Genteq 5KCP39PGS618S Condenser Fan Motor 1/2 HP 208-230V 1075 RPM Reversible – Closeout

The Genteq 5KCP39PGS618S is the factory model number for Genteq catalog 3730. It is a 1/2 HP, 1075 RPM permanent split capacitor (PSC) condenser fan and heat pump motor for 208-230V single-phase outdoor units. It has a totally enclosed air over (TEAO) body, reversible rotation, a long 6 in. shaft and any-angle mounting, so it works shaft-up or shaft-down. That flexibility makes it a common universal replacement for failed 1/2 HP condenser fan motors across many brands. Genteq has since discontinued the 3730, and this unit is new old stock and our last one. It has never been installed and has been on our shelf since it came in.

Will the 5KCP39PGS618S Replace Your 1/2 HP Condenser Fan Motor?

This is a universal-style replacement rather than a single-brand OEM part, so you match it by the nameplate. It suits outdoor units whose original motor is rated 1/2 HP, 1075 RPM, 208-230V single phase. Because it runs in any orientation and its rotation is reversible, it fits both vertical-discharge condensers with the shaft pointing up or down and units with clockwise or counterclockwise fan blades.

Before you buy, compare horsepower, RPM and voltage with the old nameplate, then check the mounting: this motor uses a belly band with extended clamp bolts. Also confirm the 6 in. shaft length works with your fan blade height in the orifice, and plan on a 10 MFD / 370V run capacitor. Matching speed and horsepower keeps airflow across the condenser coil where the system was designed to run.

Ideal for: HVAC contractors who want a flexible 1/2 HP condenser fan motor on the truck for residential and light commercial condensers and heat pumps from many manufacturers.

Different size needed? For a smaller fan load, see the 1/3 HP 208-230V 1075 RPM condenser fan motor. For a larger one, our Emerson 1868 3/4 HP condenser fan motor is also available as a closeout.

Product photo is a stock image for reference only. The actual motor, label and packaging may look different. Replacement guidance is a general guide only. Always compare the nameplate on your existing motor before ordering. This is a single new old stock unit sold as a closeout. Request motor-matching help, contact Budget Heating, or call 813-885-7999.

What's Included

Genteq Model 5KCP39PGS618S — Genteq Catalog 3730
Application Universal Condenser Fan & Heat Pump Motor
Horsepower 1/2 HP (0.37 kW)
Rated Speed 1075 RPM, 1 Speed, 6 Pole
Electrical 208-230V, Single Phase, 60 Hz, 3.5 A
Motor Type Permanent Split Capacitor (PSC), 10 MFD / 370V Capacitor Required
Frame / Enclosure 48 Frame, 5.6 in. Diameter, Totally Enclosed Air Over (TEAO)
Shaft 1/2 in. Diameter x 6 in. Extension, Flat
Rotation / Mounting Reversible, Any Angle, Belly Band with Extended Clamp Bolts
Protection Thermally Protected, Class B Insulation, 60°C Ambient
Condition New Old Stock, Never Installed, Discontinued Model, Last Unit

You receive one Genteq 5KCP39PGS618S condenser fan motor. The run capacitor, belly band, fan blade and mounting hardware are not included. Pair it with a 10 MFD / 370V run capacitor and reuse your existing band and blade if they're in good condition. The motor's 60°C ambient rating, sleeve bearings, rolled-steel frame and UL Recognized construction are made for the heat and run time of outdoor condenser duty.

Motor Features & Service Notes

Genteq 5KCP39PGS618S Condenser Fan Motor

  • Genteq factory model 5KCP39PGS618S, catalog number 3730
  • 1/2 HP for mid-size residential and light commercial condensers
  • 1075 RPM single-speed, 6-pole PSC design
  • 208-230V single phase, 60 Hz, 3.5 full-load amps
  • Reversible rotation for clockwise or counterclockwise fan blades
  • Any-angle design for shaft-up or shaft-down installations
  • Long 6 in. x 1/2 in. flat shaft for flexible blade positioning
  • Totally enclosed air over body rated for 60°C ambient
  • Thermally protected with Class B insulation
  • UL Recognized, rolled-steel frame

Closeout Buying & Installation Notes

  • New old stock, never installed and kept on our shelf
  • Genteq 3730 is discontinued, and this is our last unit
  • Match HP, RPM and voltage to your old motor's nameplate
  • Requires a 10 MFD / 370V run capacitor (not included)
  • Belly band not included, so reuse yours or order one to fit
  • Set rotation to match your fan blade before final assembly
  • Trim or position the shaft so the blade sits at the original orifice height
  • Seal around the shaft and leads to keep water out of the motor
  • Installation by a qualified HVAC technician is recommended
  • Disconnect power and discharge the capacitor before service

Specifications & Manuals

 

Manufacturer documentation for this closeout motor is not posted. For help matching a condenser fan motor, belly band or capacitor, contact Budget Heating at 813-885-7999 before ordering.

Frequently Asked Questions

Is the 5KCP39PGS618S the same as the Genteq 3730?

Yes. 5KCP39PGS618S is the Genteq factory model number on the motor sold under catalog number 3730. Distributors cross-reference the two, and you may see either number on the nameplate or box.

Can this motor be mounted shaft-up or shaft-down?

Yes. It is rated for any-angle operation, so it can be installed with the shaft pointing up or down in vertical-discharge condensers, or horizontally where the unit design calls for it.

What mounting hardware does the 5KCP39PGS618S use?

It mounts with a belly band secured by extended clamp bolts. The belly band isn't included, so reuse the band from your old motor if it fits and is in good shape.

Why is the shaft 6 inches long?

The longer shaft lets you position the fan blade at the correct height in many different condenser fan orifices, which helps one motor fit a wide range of equipment.

Since the 3730 is discontinued, is this my last chance to buy one?

From us, yes. This is our only remaining new old stock unit. Once it sells, we'll be glad to help you pick a current 1/2 HP, 1075 RPM condenser fan motor that matches your nameplate.

Does the motor I receive look like the product image?

The image is a stock photo. This new old stock Genteq may carry GE or Genteq labeling, show catalog 3730, and arrive in packaging that differs from the photo.

Customer Review

You Might Also Like