Emerson 1868 Condenser Fan Motor 3/4 HP 208-230V 1075 RPM PSC – Closeout
The Emerson 1868 (US Motors / Nidec) is a 3/4 HP, 1075 RPM permanent split capacitor (PSC) condenser fan motor for 208-230V single-phase outdoor units. It has a 5.6 in. diameter, 48Y frame, totally enclosed air over (TEAO) body and reversible rotation. That lets one motor replace a wide range of failed 3/4 HP condenser fan motors in residential and light commercial AC condensers and heat pumps. This is new old stock, and it is our last one. It has never been installed and has been on our shelf since it came in, so contractors can keep a dependable universal motor on the truck at a closeout price.
Will the Emerson 1868 Replace Your Condenser Fan Motor?
The 1868 is a universal replacement rather than a single-brand OEM part. It fits outdoor units whose original motor is rated 3/4 HP, 1075 RPM, 208-230V single phase. Because rotation can be reversed by changing a lead, one motor works for both clockwise and counterclockwise fan blades.
Before you buy, compare the old motor's nameplate with the specs below. Check horsepower, RPM, voltage, frame diameter, shaft size and mounting style, and note the microfarad rating of the existing run capacitor. Matching RPM and horsepower is important: the wrong motor can change airflow across the coil and affect head pressure and system performance.
Ideal for: HVAC service contractors replacing failed 3/4 HP, 1075 RPM condenser fan motors in larger residential split systems, heat pumps and light commercial condensing units.
Need a smaller motor? If your nameplate shows a lower horsepower, see the 1/2 HP 208-230V 1075 RPM condenser fan motor or the 1/3 HP 208-230V 1075 RPM condenser fan motor.
Product photo is a stock image for reference only. The actual motor, label and packaging may look different. Replacement guidance is a general guide only. Always compare the nameplate on your existing motor before ordering. This is a single new old stock unit sold as a closeout. Request motor-matching help, contact Budget Heating, or call 813-885-7999.
What's Included
| Model Number | 1868 — Emerson / US Motors PSC Condenser Fan Motor |
|---|---|
| Application | Universal Outdoor Condenser Fan Motor, Direct Drive |
| Horsepower | 3/4 HP |
| Rated Speed | 1075 RPM, 1 Speed |
| Electrical | 208-230V, Single Phase, 60 Hz |
| Motor Type | Permanent Split Capacitor (PSC), 370V Capacitor |
| Frame / Diameter | 48Y Frame, 5.6 in. Diameter |
| Enclosure | Totally Enclosed Air Over (TEAO) |
| Shaft | 1/2 in. Diameter x 5 in. Length |
| Rotation / Mounting | Reversible, Stud Mount |
| Condition | New Old Stock, Never Installed, Closeout, Last Unit |
You receive one Emerson 1868 condenser fan motor. The run capacitor, fan blade and mounting hardware are not included. Use a 370V run capacitor sized to the motor's nameplate requirement, and reuse your fan blade if it is straight and in good condition. Automatic-reset thermal overload protection and a continuous-duty rating make the 1868 suited to the long run cycles of summer cooling and year-round heat pump operation.
Motor Features & Service Notes
Emerson 1868 PSC Condenser Fan Motor
- Emerson / US Motors (Nidec) universal replacement condenser fan motor
- 3/4 HP for larger residential and light commercial outdoor units
- 1075 RPM single-speed operation
- 208-230V, single phase, 60 Hz
- Permanent split capacitor design, rated for a 370V run capacitor
- Reversible rotation to fit clockwise or counterclockwise fan blades
- Totally enclosed air over (TEAO) body for outdoor service
- Compact 5.6 in. diameter, 48Y frame
- 1/2 in. x 5 in. shaft with stud mounting
- Automatic-reset thermal overload protector and continuous-duty rating
Closeout Buying & Installation Notes
- New old stock, never installed and kept on our shelf
- Last unit available at closeout pricing
- Match HP, RPM and voltage to your old motor's nameplate
- Run capacitor not included, so size it to the nameplate MFD at 370V
- Set rotation to match your fan blade before final assembly
- Check that the fan blade sits at the correct height in the orifice
- Replace a bent, cracked or unbalanced fan blade
- Seal unused lead entries and route wiring away from the blade
- Installation by a qualified HVAC technician is recommended
- Disconnect power and discharge capacitors before service
Specifications & Manuals
Manufacturer documentation for this closeout motor is not posted. For help matching a condenser fan motor or capacitor, contact Budget Heating at 813-885-7999 before ordering.
Frequently Asked Questions
Is the Emerson 1868 a universal or OEM-specific condenser fan motor?
It is a universal replacement motor. It can replace many brand-specific 3/4 HP, 1075 RPM, 208-230V condenser fan motors when the horsepower, speed, frame and mounting match.
How do I change the rotation on the 1868 motor?
The 1868 is reversible. Rotation is changed by swapping the designated leads as shown on the motor's wiring label. Set it to match the direction your fan blade needs before mounting the blade.
What capacitor do I need for this condenser fan motor?
The motor needs a 370V run capacitor, which is not included. Use the microfarad (MFD) rating shown on the motor's nameplate, and replace the old capacitor if it is bulging, leaking or out of tolerance.
Can I use a 3/4 HP motor to replace a 1/2 HP condenser fan motor?
Matching the original horsepower and RPM is the recommended practice. A different-size motor changes fan blade loading and airflow across the coil, so check with the equipment manufacturer or a qualified technician before substituting.
Why is this motor priced as a closeout?
This is our final new old stock unit of the Emerson 1868. It has never been installed and is being cleared from inventory at a reduced price.
Does the stock photo show the exact Emerson 1868 I'll receive?
The photo is a stock image for reference. The new old stock 1868 you receive may carry Emerson, US Motors or Nidec labeling, and its packaging may look different from the picture.
