Carrier HC43AE200 Blower Motor 1/2 HP 208-230V 1075 RPM 3-Speed – Closeout
The Carrier HC43AE200 is a genuine Carrier OEM 1/2 HP, three-speed PSC indoor blower motor rated at 1075 RPM on 208-230V single-phase power. Genteq (GE) builds it as model 5KCP39MGR533BS to Carrier's specifications. It is a factory replacement part for Carrier indoor equipment such as air handlers and fan coils, and it replaces the earlier HC43AE200A. This is new old stock, and it is our last one. It has never been installed and has been on our shelf since it came in. Homeowners and service techs can restore factory airflow with the correct Carrier part number at a closeout price.
Is the HC43AE200 the Right Blower Motor for Your Carrier Unit?
Carrier assigns HC-series motor part numbers to specific equipment, so the most reliable match is the part number on your old motor's label or in your unit's parts list. If you see HC43AE200, HC43AE200A or Genteq 5KCP39MGR533BS, this is the factory part number for that motor.
Before you buy, confirm the old motor's nameplate: 1/2 HP, 208-230V single phase, 1075 RPM, three speeds and a 48 frame. Note the rotation direction too. The factory part is listed as counterclockwise, so it is not a field-reversible universal motor. Also check your run capacitor, which Carrier specifies at 15 µF / 370V for this motor.
Ideal for: Homeowners and HVAC techs replacing a failed HC43AE200 blower motor in a Carrier air handler, fan coil or other indoor unit that calls for this OEM part number.
Need a different option? If you need field-reversible rotation, the universal 1/2 HP 208-230V 1075 RPM blower motor is an alternative. For an energy-saving upgrade, consider the Evergreen EM 1/2 HP ECM blower motor 6205X.
Product photo is a stock image for reference only. The actual motor, label and packaging may look different. Fitment information is a general guide only. Always confirm the part number on your existing motor or in the equipment parts list before ordering. This is a single new old stock unit sold as a closeout. Request part-matching help, contact Budget Heating, or call 813-885-7999.
What's Included
| Part Number | HC43AE200 — Carrier OEM Blower Motor |
|---|---|
| Replaces | HC43AE200A |
| Motor Manufacturer | Genteq (GE) Model 5KCP39MGR533BS |
| Application | Indoor Blower Motor for Carrier Equipment |
| Horsepower | 1/2 HP |
| Speed | 1075 RPM, 3 Speeds |
| Electrical | 208-230V, Single Phase, 60 Hz, 2.4 A |
| Motor Type | Permanent Split Capacitor (PSC) |
| Frame | 48 Frame |
| Condition | New Old Stock, Never Installed, Closeout, Last Unit |
You receive one Carrier HC43AE200 blower motor. The run capacitor, blower wheel and mounting hardware are not included. Carrier lists a 15 µF / 370V run capacitor for this motor, so replacing an aging capacitor at the same time is good practice. The three speed leads connect the same way as on your original motor, keeping your heating and cooling airflow settings as they were.
Motor Features & Service Notes
Carrier HC43AE200 PSC Blower Motor
- Genuine Carrier OEM factory replacement part
- Built by Genteq (GE) as model 5KCP39MGR533BS
- 1/2 HP for mid-capacity Carrier indoor blower assemblies
- Three speed taps for heating, cooling and fan airflow
- 1075 RPM rated speed
- 208-230V single phase, 60 Hz, 2.4 full-load amps
- Permanent split capacitor design
- Standard 48 frame
- Factory-set rotation to match Carrier blower assemblies
- Replaces the earlier HC43AE200A part number
Closeout Buying & Installation Notes
- New old stock, never installed and kept on our shelf
- Last unit available at closeout pricing
- Match HC43AE200 on your old motor label or the Carrier parts list
- Requires a 15 µF / 370V run capacitor (not included)
- Confirm the rotation direction matches your blower wheel
- Label the speed leads on the old motor before removing it
- Reuse the mounting arms or band if they're in good condition
- Clean the blower wheel to restore full airflow
- Installation by a qualified HVAC technician is recommended
- Disconnect power and discharge the capacitor before service
Specifications & Manuals
Manufacturer documentation for this closeout Carrier motor is not posted. For fitment help with your Carrier model and serial number, contact Budget Heating at 813-885-7999 before ordering.
Frequently Asked Questions
Who actually manufactures the Carrier HC43AE200?
Carrier sources this motor from Genteq (formerly GE), which builds it as model 5KCP39MGR533BS to Carrier's specifications. It ships and is supported under the Carrier part number HC43AE200.
Is HC43AE200 the same as HC43AE200A?
HC43AE200 replaces the earlier HC43AE200A part number. If your old motor or parts list shows HC43AE200A, this is the current Carrier part number for it.
What size capacitor does the HC43AE200 use?
Carrier lists a 15 µF, 370V run capacitor for this motor. It isn't included, so check your existing capacitor and replace it if it is weak, bulging or leaking.
Can I reverse the rotation on this Carrier motor?
The HC43AE200 is an OEM motor with factory-set rotation, listed as counterclockwise. If your application needs a reversible motor, a universal 1/2 HP blower motor is the better choice.
Why buy the OEM Carrier motor instead of a universal motor?
An OEM motor matches the original mounting, rotation, speed taps and performance Carrier designed into your equipment. That makes installation simpler and keeps airflow where the system was engineered to run.
Is the photo the exact Carrier HC43AE200 I'll receive?
The photo is a stock image. Your new old stock HC43AE200 may carry Carrier or Genteq labeling and packaging that differs from the picture.
