15K - 24K BTU
Upgrade comfort and cut energy costs with 15K - 24K BTU ductless mini split systems. These single-zone heat pump units deliver targeted heating and cooling with premium efficiency at a budget-friendly price.
Upgrade comfort and cut energy costs with 15K - 24K BTU ductless mini split systems. These single-zone heat pump units deliver targeted heating and cooling with premium efficiency at a budget-friendly price.
Perfect for single-zone room conditioning, additions, garages, offices, or studios, this range covers 15,000, 18,000, and 24,000 BTU capacities. Most models fall in the 1.5-2 ton class, giving you the flexibility to match output to room size and climate. Choose from SEER2 ratings spanning 16 up to 20.7 for serious savings in cooling season without sacrificing comfort.
Our selection includes ductless mini split single-zone heat pumps using modern refrigerants-R-32 for lower global warming potential and high efficiency, and R-410A for proven reliability and wide availability. Whether you’re a DIY-capable homeowner planning a straightforward install or a licensed contractor outfitting a light commercial space, you’ll find options that balance premium performance and value.
Expect quiet operation, inverter technology for smooth temperature control, and cold-weather heating capabilities that vary by model. Systems are typically outdoor-unit pre-charged for a standard line set length and should be commissioned by a qualified technician. With prices starting around $1,125 and topping out near $3,664, you can tailor features to your budget and efficiency goals.
Shop trusted names like Daikin, DiamondAir, Gree, and LG. These brands offer single-zone mini splits in 15K-24K BTU with SEER2 ratings up to 20.7 and your choice of R-32 or R-410A refrigerant to meet performance, budget, and code requirements.
As a starting point: 15K for about 550-800 sq ft, 18K for 700-1,000 sq ft, and 24K for 1,000-1,400 sq ft. Insulation, windows, and climate can shift these ranges.
R-32 offers lower GWP and often higher efficiency; R-410A is widely supported and proven. Both deliver strong performance when systems are sized and installed correctly.
Many models heat well below freezing; look for low-ambient and rated heating capacity at 5°F. Extremely cold regions may still need supplemental heat.
Higher SEER2 reduces power use at a given load. Moving from 16 to 20+ SEER2 can noticeably lower summer bills, especially in hot climates with long runtimes.
Outdoor units are typically precharged for a factory line length. A licensed tech must evacuate, pressure test, open service valves, and verify charge and operation.
Most 18K-24K units require 208/230V on a dedicated breaker (often 20-30A). Always follow the unit’s nameplate MCA/MOP and local electrical code.
Top models in this category reach up to about 20.7 SEER2 from leading brands such as Daikin and Gree; availability varies by capacity and refrigerant.
Rinse or replace filters monthly in season, keep the outdoor coil clear, flush the condensate line, and schedule periodic professional inspections.
Base it on load: room size, insulation, windows, orientation, and climate. When in doubt, get a Manual J load calculation to avoid over- or undersizing.
Typical included lengths are 15-25 ft; many models allow 50-100 ft with proper elevation limits and added refrigerant per the manufacturer’s spec.