R-407A Refrigerant 25 lb Jug — R-22 Replacement for Low & Medium-Temperature Refrigeration
R-407A is a non-flammable HFC refrigerant used to replace R-22 in low- and medium-temperature refrigeration. Of the common retrofit blends, it is the closest match to R-22's capacity and performance and is an especially strong match in low-temperature applications. It runs a slightly lower discharge temperature than R-22, which reduces the need for compressor heat protection such as liquid injection, and it works well with heat reclaim systems. This 25 lb jug (brand may vary) gives refrigeration contractors a full-charge supply for R-22 conversions. Purchase requires EPA Section 608 certification.
Is R-407A the Right R-22 Replacement?
Choose R-407A when converting an R-22 refrigeration system, especially a low-temperature freezer or cold storage application where matching R-22's capacity matters most. It works with the existing capillary tube or TXV, though the TXV may need adjustment.
R-407A uses POE lubricant, so plan the retrofit around the compressor manufacturer's oil guidance. For R-22 air conditioning rather than refrigeration, R-407C is usually the better fit.
Ideal for: Converting R-22 walk-in freezers, coolers, and other low- and medium-temperature refrigeration systems.
Looking for a lower-GWP option? The Opteon XP40 (R-449A) 25 lb jug also replaces R-22 and R-407A in refrigeration.
Refrigerant purchases require the Refrigerant Agreement and proof of EPA Section 608 certification. Retrofit results depend on system design and the compressor manufacturer's recommendations. For use by qualified HVAC/R technicians. Request free sizing assistance, contact Budget Heating, or call 813-885-7999.
What's Included
| Refrigerant | R-407A (HFC); brand may vary |
|---|---|
| Net Weight | 25 lb |
| Replaces | R-22 |
| Application | Low- and medium-temperature refrigeration |
| Lubricant | POE |
| Metering Device | Works with existing capillary tube or TXV (TXV adjustment may be necessary) |
| Flammability | Non-flammable |
| Purchase Requirement | EPA Section 608 certification |
A 25 lb supply of R-407A for converting R-22 refrigeration systems while keeping capacity close to the original.
Refrigerant & Retrofit Features
R-407A Refrigerant
- Closest capacity and performance match to R-22
- Excellent R-22 match in low-temp applications
- Low- and medium-temperature refrigeration
- Slightly lower discharge temperature than R-22
- Reduces need for liquid injection
- Works well with heat reclaim systems
- Non-flammable HFC refrigerant
- For use with POE lubricant
- 25 lb jug for full system charges
- Brand may vary by supplier
Retrofit Notes
- Recover the existing R-22 charge
- Follow compressor manufacturer's oil guidance
- Works with existing capillary tubes
- Works with existing TXVs
- TXV adjustment may be necessary
- Replace the filter drier when opening the system
- Label the system with the new refrigerant
- Monitor operation after startup
- Use certified recovery equipment
- For qualified refrigeration technicians
Frequently Asked Questions
Why choose R-407A for low-temp R-22 retrofits?
R-407A is the closest match to R-22's capacity and performance among common retrofit blends, and it performs especially well in low-temperature applications.
Do I need to replace the TXV?
Usually not. R-407A works with the existing capillary tube or TXV, though the TXV may need adjustment for proper superheat.
What oil does R-407A use?
R-407A is used with POE lubricant. Follow the compressor manufacturer's guidelines for converting from mineral oil during an R-22 retrofit.
Does R-407A work with heat reclaim?
Yes. R-407A continues to work well with heat reclaim systems, even with its slightly lower discharge temperature.
Is R-407A a good choice for R-22 air conditioning?
R-407A is aimed at refrigeration. For R-22 air conditioning and heat pumps, consider R-407C or Freon™ MO99.
What should I recover the old R-22 into?
Use a recovery machine and a cylinder rated for HCFC refrigerants, such as the 30 lb refrigerant recovery cylinder.
