R-407C Refrigerant Pallet — 40 Factory-Sealed 25 lb Jugs (1,000 lb Total)
Contractors converting R-22 equipment at volume can stock R-407C by the pallet: 40 new, factory-sealed 25 lb jugs, 1,000 lb total. R-407C is a non-ozone-depleting HFC blend of R-32, R-125, and R-134a formulated to closely match R-22 in air conditioning, and it's considered the best retrofit alternative to R-22 for AC and heat pumps. A pallet suits distributors and contractors working through large R-22 conversion programs in apartments, schools, offices, and other multi-unit properties. Brand may vary. Purchase requires an EPA license. Need just one cylinder? See the single R-407C 25 lb jug.
Is a Full Pallet of R-407C the Right Buy?
A pallet makes sense when R-22 conversions are a regular part of your work: converting a portfolio of rooftop units, apartment condensers, or non-flooded evaporator chillers over a season, or supplying technicians who do. It also locks in one refrigerant and one retrofit procedure across every job.
Plan each conversion around R-407C's requirements. It is completely immiscible with mineral oil, so an R-22 retrofit needs a complete oil change to POE. It cannot be mixed with R-22; the system must be fully evacuated first. Because it's a high-glide blend, it's typically not recommended for flooded evaporators.
Ideal for: Distributors and contractors running high-volume R-22 air conditioning, heat pump, and non-flooded chiller conversions.
Need a smaller quantity? Order the R-407C 25 lb jug individually, or compare MO99 for no-oil-change conversions.
Pallet orders require proof of EPA licensing and the Refrigerant Agreement. Payment by wire transfer, cashier's check, or ACH only; no credit cards or PayPal. Contact Budget Heating to confirm freight terms. Request a bulk quote, contact Budget Heating, or call 813-885-7999.
What's Included
| Quantity | 40 jugs (one pallet) |
|---|---|
| Jug Size | 25 lb each • 1,000 lb total |
| Refrigerant | R-407C (brand may vary) |
| Composition | R-32 (23%) / R-125 (25%) / R-134a (52%) |
| Replaces | HCFC-22 (R-22) |
| Lubricant | POE (complete oil change required from mineral oil) |
| Payment | Wire transfer, cashier's check, or ACH only |
| Safety Group / Purchase | ASHRAE A1 • EPA license required |
A full pallet of factory-sealed R-407C for contractors and distributors supporting large R-22 replacement programs.
Refrigerant & Bulk Order Features
R-407C Refrigerant
- Best retrofit alternative to R-22 for AC and heat pumps
- Close performance match, slightly higher pressures
- Non-ozone-depleting HFC zeotropic blend
- For residential and commercial air conditioning
- For non-flooded evaporator chillers
- Requires complete oil change to POE
- Cannot be mixed with R-22
- High glide; not for flooded evaporators
- Critical temperature 186.86 °F
- ASHRAE safety group A1
Pallet Order Details
- 40 factory-sealed 25 lb jugs
- 1,000 lb of R-407C per pallet
- Single freight delivery
- Bulk pricing compared with single jugs
- Wire transfer, cashier's check, or ACH
- No credit cards or PayPal
- EPA license required with order
- Brand may vary
- One refrigerant for every conversion job
- Usually ships in 2 to 3 business days
Frequently Asked Questions
How many R-22 conversions can a pallet of R-407C cover?
A pallet holds 1,000 lb of R-407C. The number of systems depends on each system's charge size, so check equipment nameplates when planning a conversion program.
What should I budget for besides refrigerant on each conversion?
Each R-22 to R-407C retrofit needs a complete oil change to POE, a full evacuation of the R-22, and typically a new liquid line filter drier.
How is payment handled on a pallet order?
Pallet orders are paid by wire transfer, cashier's check, or ACH. Credit cards and PayPal aren't accepted.
Is R-407C suitable for low-temperature refrigeration conversions?
R-407C has lower capacity in low-temperature refrigeration. For low-temp R-22 conversions, R-407A is a closer match.
Can distributors buy R-407C pallets for resale?
Yes. Complete the Refrigerant Agreement for resale to EPA 608 certified technicians and provide the required EPA documentation.
Where do I recover the R-22 removed during conversions?
Use certified recovery equipment and recovery cylinders such as the 30 lb refrigerant recovery cylinder.
