5 Ton Rheem RP19AY60AJVCA Inverter Heat Pump Condenser
The 5 ton Rheem RP19AY60AJVCA is the maximum-capacity model in the Endeavor Line Prestige Series, Rheem's highest-efficiency heat pump family. Delivering 54,000 BTU of inverter-driven heating and cooling on low-GWP R-454B refrigerant, this outdoor unit brings variable-speed comfort to the largest homes — running long, quiet, humidity-controlling cycles at a capacity where single-stage equipment usually feels harsh and uneven.
Is a 5 Ton Heat Pump the Right Size?
A 5 ton (60,000 BTU) system is the largest residential capacity in this line, generally intended for big homes in the range of roughly 2,600 to 3,200-plus square feet. The RP19AY60AJVCA's variable-speed compressor lets a large system behave gently — modulating down on mild days so a high-capacity unit doesn't overcool and short-cycle the way a fixed-speed 5 ton would.
At this size, ductwork frequently becomes the limiting factor: a 5 ton unit moves a lot of air and needs duct capacity to match. Insulation, air leakage, window load, and regional design temperatures all matter, so a Manual J and Manual D review should confirm both the load and the duct system before installing this capacity.
Ideal for: large single-family homes, expansive open floor plans, and high-load layouts requiring maximum heating and cooling output.
Not sure you need this much? Compare the 4 Ton Rheem RP19AY48AJVCA Inverter Heat Pump, which suits many large homes at a lower capacity.
Recommended applications are general guidelines only. Actual system requirements depend on insulation, ambient conditions, duct design, window load, and your local design temperatures. Request free sizing assistance, contact Budget Heating, or call 813-885-7999.
What's Included
| Outdoor Unit | RP19AY60AJVCA — 5 Ton Inverter Heat Pump Condenser |
|---|---|
| Nominal Capacity | 5.0 Tons / 54,000 BTU (cooling & 47°F heating) |
| Cooling Efficiency | 17.5 SEER2 / 10.5 EER2 (AHRI-tested combination) |
| Heating Efficiency | 8.5 HSPF2 (Region IV) |
| Refrigerant | R-454B (low-GWP A2L), 210 oz. factory charge |
| Compressor | Inverter-driven variable-speed scroll (40–100%, 115% overdrive) |
| Sound Level | As low as 58 dBA |
| Electrical | 208/230V, 1 Phase, 60 Hz — MCA 30, Max Breaker 50A |
| Warranty | 10-Year Parts & 10-Year Conditional Unit Replacement (registration required) |
Sold as the outdoor heat pump condenser. It is commonly matched with the variable-speed RHMVY6021SEACAJ air handler and an EcoNet Smart Thermostat (RETST900SYS) for full communicating, modulating operation.
Performance & Comfort Features
Efficiency & Performance
- Maximum 54,000 BTU capacity in the Endeavor Prestige line
- Inverter variable-speed scroll compressor for smooth high-capacity output
- 17.5 SEER2 / 10.5 EER2 cooling with 8.5 HSPF2 heating
- Low-GWP R-454B refrigerant with a 210 oz. factory charge
- 115% overdrive capacity for peak summer and winter demand
- Brushless DC variable-speed fan motor for efficient high airflow
Comfort, Controls & Serviceability
- EcoNet Enabled with active monitoring and remote control
- PlusOne Diagnostics and Bluetooth-assisted commissioning
- PlusOne Refrigerant Detection System with A2L sensor and mitigation
- Advanced humidity control for even comfort in large spaces
- Swept Wing fan and sound blanket keep a big unit quiet
- External gauge ports, service trays, and quick-release louvers
Specifications & Manuals
Product documentation includes technical specifications, installation instructions, product literature, and warranty information to assist with equipment selection, installation, and service.
Frequently Asked Questions
What applications need a 5 ton RP19AY60AJVCA heat pump?
The 5 ton unit delivers 60,000 BTU and is the largest in this line, generally suited to big homes around 2,600 to 3,200-plus square feet or high-load layouts. Duct capacity and a Manual J load calculation should confirm it before installation.
Why is the 5 ton RP19AY rated 17.5 SEER2 when smaller sizes reach 19?
Rated efficiency depends on the outdoor unit and its matched indoor coil. In its AHRI-tested combination the 5 ton RP19AY60AJVCA is rated 17.5 SEER2 and 10.5 EER2, while the 2 through 4 ton models reach 19.0 SEER2. All share the same Prestige-series design and 8.5 HSPF2 heating.
What are the minimum circuit ampacity and max breaker for the RP19AY60AJVCA?
This unit requires a minimum circuit ampacity of 30 amps and a maximum overcurrent protection of 50 amps on a 208/230V single-phase circuit. Confirm wire, fuse, and disconnect sizing against the National Electrical Code and installation instructions.
What matched air handler pairs with the 5 ton RP19AY?
Rheem's designated tested combination for this unit uses the variable-speed RHMVY6021SEACAJ air handler. Matching to an approved indoor coil is required to reach rated capacity and efficiency.
How much refrigerant does the RP19AY60AJVCA ship with?
The 5 ton unit ships with a 210 oz. factory charge of R-454B, sufficient for 15 ft of line set. Longer line runs require additional charge as specified in Rheem's installation instructions, up to the 150 ft maximum length.
Does the RP19AY60AJVCA support Bluetooth setup and diagnostics?
Yes. PlusOne Diagnostics with Bluetooth connectivity works with the Rheem Contractor and EcoNet apps to simplify set-up, monitoring, and troubleshooting, making commissioning and service faster for technicians.
RP19AY Technical SpecificationsRP19AY Installation InstructionsRP19AY Brochure
Rheem Warranty Certificate
