5 Ton Rheem 17.5 SEER2 R-454B Modulating Inverter Heat Pump System
This complete 5 ton Rheem system matches the RP19AY60AJVCA inverter heat pump condenser with the RHMVY6021SEACAJ modulating air handler for a factory-paired, EcoNet communicating system rated at 17.5 SEER2 — the maximum-capacity option in Rheem's Endeavor Prestige inverter lineup. Running on low-GWP R-454B refrigerant, it brings variable-speed comfort to the largest homes, where a modulating system tames the harsh, uneven feel of single-stage 5 ton equipment.
Is a 5 Ton Heat Pump System the Right Size?
A 5 ton (60,000 BTU) system is the largest residential capacity in this line, generally intended for big homes in the range of roughly 2,600 to 3,200-plus square feet. Its variable-speed compressor and modulating blower let a high-capacity system run gently, modulating down on mild days so it doesn't overcool and short-cycle the way a fixed-speed 5 ton would.
At this size, ductwork frequently becomes the limiting factor: a 5 ton system moves a lot of air and needs duct capacity to match. Insulation, air leakage, window load, and regional design temperatures all matter, so a Manual J and Manual D review should confirm both the load and the duct system before installing this capacity.
Ideal for: large single-family homes and high-load layouts needing maximum-capacity variable-speed comfort.
Not sure you need this much? Compare the 4 Ton Rheem 19 SEER2 Inverter Heat Pump System, which suits many large homes at a lower capacity.
Recommended applications are general guidelines only. Actual system requirements depend on insulation, ambient conditions, duct design, window load, and your local design temperatures. Request free sizing assistance, contact Budget Heating, or call 813-885-7999.
What's Included
| Outdoor Condenser | RP19AY60AJVCA — 5 Ton Inverter Heat Pump Condenser |
|---|---|
| Indoor Air Handler | RHMVY6021SEACAJ — 5 Ton Modulating EcoNet Air Handler |
| System Efficiency | 17.5 SEER2 / 10.5 EER2 / 8.5 HSPF2 (AHRI Ref. 215576397) |
| Nominal Capacity | 5.0 Tons / 54,000 BTU |
| Refrigerant | R-454B (low-GWP A2L), factory-charged condenser |
| Outdoor Compressor | Inverter-driven variable-speed scroll (40–100%, 115% overdrive) |
| Indoor Blower | 3/4 HP truly variable-speed Constant CFM modulating ECM |
| Controls | EcoNet Enabled communicating system with PlusOne Bluetooth diagnostics |
| Refrigerant Detection | Factory-installed PlusOne A2L sensor in the air handler |
| Electrical | 208/230V, 1 Ph, 60 Hz (condenser MCA 30 / Max Breaker 50A; air handler on a separate circuit) |
| Warranty | 10-Year Parts & 10-Year Conditional Unit Replacement (registration required) |
This AHRI-certified matched system combines the largest condenser in the RP19AY line with a slim 21-inch modulating air handler, delivering maximum-capacity variable-speed comfort on R-454B refrigerant.
System Components & Features
RP19AY60AJVCA Outdoor Heat Pump
- Maximum 54,000 BTU capacity in the Endeavor Prestige line
- Inverter variable-speed scroll compressor for smooth high output
- 17.5 SEER2 / 10.5 EER2 with 8.5 HSPF2 heating
- Low-GWP R-454B with a 210 oz. factory charge
- Swept Wing fan and sound blanket, as low as 58 dBA
- PlusOne refrigerant detection and Bluetooth diagnostics
RHMVY6021SEACAJ Indoor Air Handler
- Truly variable-speed Constant CFM modulating blower
- Factory-installed aluminum coil with Electronic Expansion Valve
- Slim 21-inch cabinet delivers full 5 ton airflow
- EcoNet Enabled with dip-switch-free Bluetooth commissioning
- Included PlusOne A2L refrigerant detection sensor
- 4-way convertible with less than 2% cabinet air leakage
Specifications & Manuals
Product documentation includes condenser and air handler technical specifications, installation information, product literature, and warranty details to assist with equipment selection, installation, and service.
Frequently Asked Questions
What's in the 5 ton RP19AY60AJVCA and RHMVY6021SEACAJ system?
The system pairs the RP19AY60AJVCA 5 ton inverter heat pump condenser with the RHMVY6021SEACAJ 5 ton modulating air handler, certified together under AHRI Reference Number 215576397.
Why is the 5 ton system 17.5 SEER2 while smaller sizes reach 20?
Rated efficiency depends on the condenser and coil combination. The 5 ton match is AHRI-certified at 17.5 SEER2, while the 2 and 3 ton pairings reach 20 SEER2. All use the same Endeavor Prestige inverter platform and 8.5 HSPF2 heating.
Is a 5 ton system right for my home?
A 5 ton system delivers 60,000 BTU and is the largest in this line, generally suited to big homes around 2,600 to 3,200-plus square feet or high-load layouts. Duct capacity and a Manual J load calculation should confirm it before installation.
How quiet is the 5 ton outdoor unit?
The RP19AY60AJVCA condenser carries a standard sound rating as low as 58 dBA, helped by Swept Wing fan technology and a compressor sound blanket, while variable-speed operation keeps the unit quieter at partial loads.
Does the 5 ton system support Bluetooth commissioning?
Yes. Both units feature PlusOne diagnostics with Bluetooth, and the air handler supports dip-switch-free commissioning through the Rheem Contractor App, simplifying set-up and troubleshooting for technicians.
What line connections and refrigerant does the 5 ton system use?
The system uses R-454B refrigerant with a 3/8-inch liquid line and a 7/8-inch vapor line between the condenser and air handler. Follow the installation instructions for line length limits and additional charge requirements.
RP19AY Technical SpecificationsRP19AY Installation InstructionsRP19AY BrochureRHMV Technical Specifications
Rheem Warranty Certificate
