Copper Fitting reducer coupling 1 1/8" Outside Dimension to 7/8" Inside Dimension
With the use of this reducer you are easily able to connect to a 1 1/8" Belled or swaged or "belled" fitting. Perfect for Goodman and other manufacturers who have an opening size at condenser meant for 1 1/8 O.D. copper pipe to bring it down to 7/8" without swaging. Simply connect the 1 1/8" O.D. end of reducer to inside the suction line opening at condenser and braze. Then connect on 7/8" O.D. copper to other end and braze.
With the use of this reducer you are easily able to connect to a 1 1/8" Belled or swaged or "belled" fitting. Perfect for Goodman and other manufacturers who have an opening size at condenser meant for 1 1/8 O.D. copper pipe to bring it down to 7/8" without swaging. Simply connect the 1 1/8" O.D. end of reducer to inside the suction line opening at condenser and braze. Then connect on 7/8" O.D. copper to other end and braze.
PLEASE NOTE: This product is not intended for 1 1/8 O.D. to 1 1/8 O.D. or 7/8 O.D. to 7/8 O.D or 7/8" O.D. to 1 1/8 O.D. (this connection can be done with this fitting but requires a spare piece of 7/8" O.D. copper). connections swaging is required in this scenario.
