3.5 Ton DiamondAir 14.3 SEER2 R32 Heat Pump System D1442HCL32A, D1442HAEAL32A
The DiamondAir 3.5 ton heat pump system is built for homes that sit between a 3 ton and a 4 ton load. It pairs the D1442HCL32A outdoor heat pump with the D1442HAEAL32A air handler (AHRI #218350150) and is rated at 38,400 BTU/h cooling and 40,000 BTU/h heating at 14.3 SEER2 with R-32 refrigerant. A taller 32-7/8" outdoor cabinet, a 2/5 HP blower rated at 1,200 CFM, and heat strip options up to 20 kW make it a strong all-electric choice for larger homes in hot summers and cool winters.
Is a 3.5 Ton Heat Pump System the Right Size?
A 3.5 ton system fills an important half-step in sizing. When a load calculation comes in too high for 3 tons but well short of 4, this size helps avoid both undersizing and short-cycling.
Large windows, vaulted ceilings, bonus rooms, older insulation, and long duct runs all raise the load, while shade, newer windows, and sealed ducts lower it. Because this system moves about 1,200 CFM, confirm the return and supply ductwork can carry that airflow without excessive static pressure.
Ideal for: Four-bedroom homes, homes with bonus rooms or vaulted ceilings, and larger properties in warm climates needing a heat pump between 3 and 4 tons.
Need more capacity? Step up to the 4 Ton DiamondAir R32 Heat Pump System D1448HCL32A, D1448HAEAL32A for larger homes that need a bigger air handler and more heating and cooling output.
Recommended sizing is a general guideline only. Actual system requirements depend on insulation, climate, ductwork, windows, occupancy, and home layout. Request free sizing assistance, contact Budget Heating, or call 813-885-7999.
What's Included
| Outdoor Heat Pump | D1442HCL32A — 3.5 Ton R-32 Heat Pump Condenser |
|---|---|
| Indoor Air Handler | D1442HAEAL32A Air Handler with PSC Blower |
| Application | Residential Split System Heat Pump (Heating & Cooling) |
| Refrigerant | R-32 |
| Compressor | Scroll Compressor with Crankcase Heater |
| Efficiency | 14.3 SEER2 — AHRI #218350150 |
| Electrical | 208-230V, Single Phase, 60 Hz Outdoor Unit |
| Air Handler Electrical | 208-230V, Single Phase, 60 Hz |
This package keeps the space-saving 19-11/16" wide air handler cabinet but upgrades to a 2/5 HP blower for 1,200 CFM. Outside, the D1442HCL32A moves to the taller 32-7/8" cabinet. It's the smallest size in the line with a 20 kW breakered heat strip option, which suits homeowners who want strong backup heat. Learn more about DiamondAir HVAC systems available from Budget Heating.
Heat Pump & Air Handler Features
D1442HCL32A Outdoor Heat Pump
- 38,400 BTU/h rated cooling
- 40,000 BTU/h rated heating
- Scroll compressor with crankcase heater
- Taller 32-7/8" H x 29-1/8" W x 29-1/8" D cabinet
- 1/7 HP PSC outdoor fan motor
- 23.9 A MCA, 35 A max overcurrent protection
- Copper tube and aluminum fin coil
- 3/8" liquid and 3/4" suction line sizes
- 65 dB(A) rated sound level
- Runs in cooling up to 120°F and heating down to 5°F
D1442HAEAL32A Air Handler
- 1,200 CFM nominal airflow
- 2/5 HP PSC blower motor, 925 RPM rated
- Metal centrifugal blower assembly
- Aluminum tube-and-fin coil, 9/32" tubing
- Rated at 0.5 in. w.c. external static pressure
- 3.76 A MCA, 6 A MOP (without heat strip)
- Narrow 19-11/16" wide cabinet
- 54 dB(A) rated sound level
- Field-replaceable piston metering device (see piston instructions)
- Heat strips available from 5 kW up to 20 kW breakered
Specifications & Manuals
Product documentation includes outdoor unit and air handler technical specifications, installation manuals, heat strip installation instructions, piston replacement instructions, and DiamondAir warranty information to assist with equipment selection, installation, and service.
Frequently Asked Questions
When should I choose a 3.5 ton heat pump instead of a 3 or 4 ton?
Choose the 3.5 ton D1442HCL32A when your load calculation lands between 3 and 4 tons. Correct sizing helps the system hold steady temperatures and remove humidity.
How does the D1442 system improve on the 3 ton D1436 package?
Rated heating jumps from 33,000 to 40,000 BTU/h, airflow rises from 1,060 to 1,200 CFM with a 2/5 HP blower, and the outdoor cabinet grows to 32-7/8" tall.
Can the 3.5 ton system use a 20 kW heat strip?
Yes. This size offers optional heat strips from 5 kW up to a 20 kW breakered kit (WHE2002BX) for supplemental and emergency heat.
Does R-32 equipment require special installation practices?
R-32 is an A2L (mildly flammable) refrigerant, so installers must follow the manufacturer's installation manual and current codes for A2L systems. Professional installation by a licensed HVAC technician is recommended.
What static pressure is the D1442HAEAL32A air handler rated at?
DiamondAir rates the air handler's nominal airflow at 0.5 in. w.c. (125 Pa) external static pressure.
What metering device does the D1442HAEAL32A air handler use?
The indoor coil uses a piston metering device. DiamondAir provides piston replacement and installation instructions, linked in the Specifications & Manuals section.


Click On Links Below For Documents:
DiamondAir R32 Heat Pump Condenser Technical Specifications
DiamondAir R32 SEER2 Air Handler Technical Specs
DiamondAir R32 SC, HP Condenser Installation Manual
D1418-D1460HAEAL32A R32 Air Handler Installation Manual
D1418-D1460HAEAL32A R32 Heat Strip Installation Manual
R32 Piston Replacement and Installation Instructions
DiamondAir Warranty Certificate
