decor decor
51-102728-24, 51-102728-13 | Last One on the Shelf – New Old Stock Rheem/Ruud ECM Fan Motor at Closeout Pricing

Protech ECM Condenser Fan Motor 1/3 HP 208-230v Variable Speed, 51-102728-24

· SKU FLcloseout35
Average Rating:
List price: $650.00

Sale price:

$199.00
You save $451.00!
  • SKU: FLcloseout35
  • Availability:
    Usually Ships in 2 to 3 Business Days
  • Shipping:
    Calculated at Checkout
Adding to cart… The item has been added

Protech 51-102728-24 ECM Condenser Fan Motor 1/3 HP 208-230V Variable Speed – Closeout

This is the genuine Protech 51-102728-24, the factory OEM 1/3 HP variable-speed ECM outdoor fan motor used in many Rheem and Ruud condensers and heat pumps. It runs on 208-230V single-phase power, turns counterclockwise and mounts in a 39 frame shell. This is new old stock, and it is our last one. It has never been installed and has been on our shelf since it came in. Contractors and homeowners with a failed 51-102728-24 or 51-102728-13 get the correct ECM motor at a closeout price instead of full OEM list.

Is the 51-102728-24 the Right Motor for Your Unit?

The 51-102728-24 is a direct OEM replacement, not a universal motor. The best way to confirm fit is to match the part number on the motor label or in your unit's parts list. It is listed as the replacement for the earlier 51-102728-13 and is used in Rheem and Ruud outdoor units, including RAPM condensing units.

Before you buy, check the old motor's specs: 1/3 HP, 208-230V single phase, counterclockwise rotation viewed from the shaft end, 1/2 in. shaft and 5-5/8 in. body diameter. This motor is an ECM that the condenser's control board drives at variable speed. It is not a plug-in swap for a standard PSC condenser fan motor that uses a run capacitor.

Ideal for: Service techs, HVAC contractors and property maintenance teams replacing a failed 51-102728-24 or 51-102728-13 ECM outdoor fan motor in Rheem or Ruud split systems and heat pumps.

Prefer a conventional PSC motor? If your unit uses a standard single-speed motor, see the 1/3 HP 208-230V 825 RPM condenser fan motor or the 1/3 HP 208-230V 1075 RPM condenser fan motor.

Fitment information is a general guide only. Always confirm the part number on your existing motor or in the equipment parts list before ordering. This is a single new old stock unit sold as a closeout. Request part-matching help, contact Budget Heating, or call 813-885-7999.

What's Included

Part Number 51-102728-24 — Protech ECM Outdoor Condenser Fan Motor
Replaces 51-102728-13
Application Outdoor Condenser / Heat Pump Fan Motor, Direct Drive
Horsepower 1/3 HP
Motor Type ECM, Variable Speed (Non-Programmable)
Electrical 208-230V, Single Phase, 50/60 Hz, 2.8 FLA
Rotation Counterclockwise (Viewed from Shaft End)
Frame / Mounting 39 Frame, 5-5/8 in. Diameter, Shell-Band / Thru-Bolt Mount
Shaft 1/2 in. Diameter x 2-5/8 in. Overall Length
Bearings Ball Bearing
Condition New Old Stock, Never Installed, Closeout, Last Unit

You receive one Protech 51-102728-24 ECM condenser fan motor. The fan blade, mounting bracket and wiring harness from your existing unit are not included. This high-voltage ECM is designed to run on line voltage without a separate step-down transformer, so it can go back into the same position as the motor it replaces.

Motor Features & Service Notes

51-102728-24 ECM Motor Construction

  • Genuine Protech OEM motor for Rheem and Ruud outdoor units
  • Electronically commutated motor (ECM) for efficient variable-speed fan operation
  • 1/3 HP output on 208-230V single-phase power
  • High-voltage ECM design with no step-down transformer required
  • 2.8 full-load amps at 208V and 230V
  • Counterclockwise rotation from the shaft end
  • Compact 39 frame with 5-5/8 in. motor body
  • Ball bearings for long service life
  • 1/2 in. shaft, 2-5/8 in. overall length
  • Shell-band and thru-bolt mounting

Closeout Buying & Installation Notes

  • New old stock, never installed and kept on our shelf
  • Last unit available at closeout pricing
  • Listed replacement for earlier 51-102728-13 motors
  • Match the part number on your old motor label before ordering
  • Confirm CCW rotation and shaft size against your existing motor
  • Reuse your existing fan blade, so check the blade hub and set screw first
  • Not interchangeable with PSC capacitor-run condenser fan motors
  • Variable speed is controlled by the outdoor unit's control board
  • Installation by a qualified HVAC technician is recommended
  • Disconnect all power before servicing the outdoor unit

Specifications & Manuals

Manufacturer documentation for this closeout motor is not posted. For fitment questions or specification details, contact Budget Heating at 813-885-7999 before ordering.

Frequently Asked Questions

Will the 51-102728-24 replace my old 51-102728-13 motor?

Yes. Rheem's parts data lists the 51-102728-24 as the replacement for the 51-102728-13 ECM outdoor fan motor. Confirm that the horsepower, rotation and shaft size match your existing motor before installing.

What does "new old stock" mean for this motor?

New old stock means the motor has never been installed or used, but it has been in our inventory for some time. It is the same OEM part number, sold as our last unit at closeout pricing.

Can I use this ECM motor in place of a standard PSC condenser fan motor?

No. The 51-102728-24 is a variable-speed ECM that is driven by the outdoor unit's controls. If your unit uses a capacitor-run PSC motor, choose a matching PSC condenser fan motor instead.

Does this motor come with a fan blade or capacitor?

No. You receive the motor only. ECM motors don't use a run capacitor, and your existing fan blade is normally reused after you confirm that the hub fits the 1/2 in. shaft.

Which direction does the 51-102728-24 rotate?

It rotates counterclockwise when viewed from the shaft end. This matches the original factory motor in compatible Rheem and Ruud outdoor units.

Which equipment uses the Protech 51-102728-24?

This motor is used in a range of Rheem and Ruud outdoor condensing units and heat pumps, including RAPM series condensers. Check your unit's parts list or the label on the old motor to confirm it calls for 51-102728-24.

Customer Review

You Might Also Like