Compact Liquid Line Protection for HVAC and Refrigeration Systems
The Sporlan C-053 Catch-All liquid line filter drier helps protect air-conditioning and refrigeration systems by removing moisture, acids, dirt, sludge, and other harmful contaminants from the refrigerant circuit. Its compact 5 cubic inch molded core and 3/8" SAE flare connections make it a practical choice for smaller systems and service applications where a brazed connection is not preferred.
High-Capacity Moisture and Acid Removal
The C-053 uses Sporlan's molded porous Catch-All core to force refrigerant through the desiccant material rather than allowing it to bypass the filtering surface. This provides effective contact with the core for moisture removal, acid control, and filtration of solid debris.
Ideal for: Smaller air-conditioning and refrigeration systems, equipment repairs, preventive system protection, and liquid line applications requiring 3/8" SAE flare connections.
Catch-All Filter Drier Features
- 3/8" male SAE flare inlet and outlet connections
- 5 cu. in. molded porous desiccant core
- Removes moisture, acids, dirt, scale, sludge, and solid contaminants
- Helps protect compressors, expansion valves, capillary tubes, and solenoid valves
- Molecular sieve provides high moisture-removal capacity
- Activated alumina helps remove acids and lubricant breakdown products
- Flare connections allow installation without brazing
- Compact sealed construction for smaller HVAC and refrigeration applications
- Designed for one-way refrigerant flow
Installation
Install the Sporlan C-053 in the liquid line with refrigerant flowing in the direction indicated by the arrow on the filter drier. Inspect the flare surfaces before installation and tighten the connections using accepted refrigeration practices.
Filter drier selection, system evacuation, refrigerant charging, and installation should be completed by a qualified HVAC or refrigeration technician.
Frequently Asked Questions
What size connections does the Sporlan C-053 use?
The C-053 has 3/8" male SAE flare connections on both the inlet and outlet.
Is the C-053 a solder or flare filter drier?
The C-053 uses SAE flare connections and does not require brazing. The similar C-053-S model uses ODF solder connections.
What does the Sporlan Catch-All filter drier remove?
The molded Catch-All core helps remove moisture, acids, dirt, scale, sludge, lubricant breakdown products, and other solid contaminants from the refrigerant system.
Where is the C-053 installed?
The C-053 is installed in the refrigerant liquid line with the flow arrow pointing in the direction of refrigerant flow.
What is the difference between the C-053 and C-083?
Both models use 3/8" SAE flare connections, but the C-053 has a smaller 5 cubic inch core. The C-083 has a larger nominal 8 cubic inch core for applications requiring additional moisture and contaminant capacity.
| WEIGHT | 3 Pounds (Lb) |
|---|---|
| WIDTH | 3 Inches (In) |
| HEIGHT | 3 Inches (In) |
| COUNTRY OF ORIGIN | USA |
| UPC OR BARCODE | 68747223625 |
| HAZARDOUS MATERIAL | No |
| EPA CERT REQUIRED | No |
| LENGTH | 11 Inches (In) |
| BRAND | Sporlan |
| CONNECTION TYPE | ODF |
| SIZE | 1 1/8" |
| TYPE | Suction Line |
