GemTech GT-E50-MHP2 Multi-HP Blower Motor 1/6–1/2 HP 208-230V 1075 RPM – Closeout
The GemTech GT-E50-MHP2 is a multi-horsepower permanent split capacitor (PSC) motor for indoor evaporator and blower duty on 208-230V, 60 Hz single-phase power. It is rated from 1/6 HP up to 1/2 HP at 1075 RPM, and the run capacitor you install sets the output. With a 10 µF capacitor it delivers its full 1/2 HP rating. The 48Y frame and 1/2 in. x 4 in. shaft fit standard direct-drive blower assemblies, so one motor can cover several horsepower ratings in the service van. This is new old stock, and it is our last one. It has never been installed and has been on our shelf since it came in. It's priced to move as a closeout.
Will the GT-E50-MHP2 Work in Your Blower?
Because it is a multi-horsepower design, the GT-E50-MHP2 can stand in for a range of 208-230V, 1075 RPM blower motors between 1/6 and 1/2 HP. Match the horsepower your equipment needs by choosing the capacitor shown for that rating on the motor's label. For a 1/2 HP application, that is a 10 µF capacitor. Using the correct capacitor is what keeps the motor's speed and current in the right range for your blower wheel.
Before you buy, compare the original motor's voltage, RPM and horsepower. Check that a 48Y frame and a 1/2 in. x 4 in. shaft will fit your blower housing and wheel, and compare rotation and mounting with your original. Matching horsepower and RPM preserves the airflow your furnace, air handler or fan coil was designed to deliver.
Ideal for: HVAC service techs who want one flexible 208-230V, 1075 RPM blower motor on the truck to cover 1/6 to 1/2 HP evaporator and blower replacements.
Need an OEM-specific 1/2 HP motor? If your Carrier unit calls for it, see the Carrier HC43AE200 1/2 HP 3-speed blower motor, also a closeout, or our universal 1/2 HP 208-230V 1075 RPM blower motor.
Product photo is a stock image for reference only. The actual motor, label and packaging may look different. Replacement guidance is a general guide only. Always compare the nameplate on your existing motor before ordering. This is a single new old stock unit sold as a closeout. Request motor-matching help, contact Budget Heating, or call 813-885-7999.
What's Included
| Model Number | GT-E50-MHP2 — GemTech Multi-HP PSC Motor |
|---|---|
| Application | Indoor Evaporator / Blower Motor, Direct Drive |
| Horsepower | Multi-HP: 1/6 to 1/2 HP (Set by Capacitor) |
| Rated Speed | 1075 RPM |
| Electrical | 208-230V, Single Phase, 60 Hz, 3.6 A |
| Capacitor | 10 µF for 1/2 HP Output (Not Included) |
| Motor Type | Permanent Split Capacitor (PSC) |
| Frame / Shaft | 48Y Frame, 1/2 in. Diameter x 4 in. Shaft |
| Condition | New Old Stock, Never Installed, Closeout, Last Unit |
You receive one GemTech GT-E50-MHP2 motor. The run capacitor, blower wheel and mounting hardware are not included. Choose the capacitor that matches the horsepower your equipment needs, as shown on the motor label (10 µF for 1/2 HP). Reuse your existing blower wheel and mounting hardware if they're in good condition.
Motor Features & Service Notes
GemTech GT-E50-MHP2 Multi-HP Motor
- Multi-horsepower PSC design covering 1/6 to 1/2 HP
- Output set by the run capacitor you install
- Full 1/2 HP output with a 10 µF capacitor
- 1075 RPM for standard direct-drive blower wheels
- 208-230V, 60 Hz single-phase power
- 3.6 amp rating at full output
- Standard 48Y frame
- 1/2 in. diameter x 4 in. shaft
- Designed for evaporator and indoor blower duty
- One motor stocks in place of several fixed-HP motors
Closeout Buying & Installation Notes
- New old stock, never installed and kept on our shelf
- Last unit available at closeout pricing
- Match the horsepower and 1075 RPM of your original motor
- Capacitor not included, so choose it by the horsepower needed
- Check that the 4 in. shaft suits your blower wheel hub
- Compare rotation and mounting with your old motor
- Check amp draw after startup to confirm correct sizing
- Clean the blower wheel to restore full airflow
- Installation by a qualified HVAC technician is recommended
- Disconnect power and discharge the capacitor before service
Specifications & Manuals
Manufacturer documentation for this closeout motor is not posted. For help choosing the right capacitor and horsepower setting, contact Budget Heating at 813-885-7999 before ordering.
Frequently Asked Questions
How can one motor cover 1/6 to 1/2 HP?
The GT-E50-MHP2 is a multi-horsepower PSC motor. Its output depends on the run capacitor connected to it: a larger capacitor gives more horsepower and a smaller one gives less. That lets one motor replace several fixed-horsepower blower motors.
What capacitor do I use for 1/2 HP?
Use a 10 µF run capacitor for the full 1/2 HP rating. For lower horsepower settings, follow the capacitor chart on the motor label. The capacitor isn't included.
What happens if I use the wrong capacitor size?
An undersized capacitor can leave the motor underpowered for your blower wheel, and an oversized one can push current higher than needed. Matching the capacitor to the required horsepower keeps speed and amp draw where they should be.
What equipment can use the GT-E50-MHP2?
It's designed for indoor evaporator and blower duty, such as furnaces, air handlers and fan coils with direct-drive blowers that use a 208-230V, 1075 RPM motor between 1/6 and 1/2 HP.
Why do techs like multi-horsepower motors on the truck?
Carrying one motor that covers several horsepower ratings saves trips to the supply house and frees van space, so a failed blower motor can often be replaced on the first visit.
Is the GemTech motor I receive the one in the photo?
The photo is a stock image. This new old stock motor carries GemTech labeling, and its packaging may look different from the picture.
