Fasco Bard 8103-016 Condenser Fan Motor 1/5 HP 208-230V 1090 RPM CW – Closeout
The Bard 8103-016 is a genuine Bard OEM 1/5 HP permanent split capacitor (PSC) condenser fan motor for select Bard wall mount air conditioners and heat pumps. It runs at 1090 RPM on 208-230V single-phase power, draws about 1.2 amps and turns clockwise viewed from the lead end. It has an enclosed 48Y frame body and mounts with a belly band. Bard has since changed this part number, first to S8103-016 and then to the current 8103-028BX. Our unit is new old stock and our last one. It has never been installed and has been on our shelf since it came in. If you want the original-number Bard motor, it's here at a closeout price.
Does Your Bard Wall Mount Unit Call for the 8103-016?
Bard lists condenser fan motors by part number for each wall mount model. If your parts list or the label on the failed motor shows 8103-016 or S8103-016, this is the matching motor. Bard's current replacement for those numbers is 8103-028BX, which Bard states is the same motor under a new part number, so all three numbers serve the same position.
Before you buy, check the old motor's nameplate: 1/5 HP, 208-230V single phase, 1090 RPM and clockwise rotation viewed from the lead end. Rotation matters here, because Bard uses both clockwise and counterclockwise 1/5 HP condenser fan motors across its wall mount line, and the wrong direction moves air backward through the coil. Also confirm the belly-band mounting, shaft and run capacitor rating against the original.
Ideal for: Facility managers and HVAC techs maintaining Bard wall mount air conditioners and heat pumps in classrooms, modular offices, telecom shelters and portable buildings whose condenser fan calls for Bard 8103-016.
Need the counterclockwise version? If your Bard parts list calls for 8103-013 instead, see the Emerson K55HXPAA-1269 1/5 HP CCW condenser fan motor for Bard 8103-013, also a closeout.
Product photo is a stock image for reference only. The actual motor, label and packaging may look different. Fitment information is a general guide only. Always confirm the part number on your existing motor or your Bard unit's parts list before ordering. This is a single new old stock unit sold as a closeout. Request part-matching help, contact Budget Heating, or call 813-885-7999.
What's Included
| Bard Part Number | 8103-016 — Bard OEM Condenser Fan Motor |
|---|---|
| Later Bard Numbers | S8103-016, S8103-028, 8103-028BX (Current) |
| Application | Outdoor Condenser Fan, Select Bard Wall Mount Units |
| Horsepower | 1/5 HP |
| Rated Speed | 1090 RPM |
| Electrical | 208-230V, Single Phase, 60 Hz, 1.2 A |
| Motor Type | Permanent Split Capacitor (PSC) |
| Rotation | Clockwise, Viewed from Lead End (CWLE) |
| Frame / Mounting | 48Y Frame, Enclosed, Belly-Band Mount |
| Condition | New Old Stock, Never Installed, Closeout, Last Unit |
You receive one Bard 8103-016 condenser fan motor. The run capacitor, belly band, fan blade and mounting hardware are not included. Reuse your existing band and fan blade if they're in good condition, and use the run capacitor rating printed on the motor nameplate. Its enclosed body and low 1.2-amp draw suit the outdoor side of a wall mount unit, where the motor runs every cooling cycle.
Motor Features & Service Notes
Bard 8103-016 Condenser Fan Motor
- Genuine Bard OEM condenser fan motor part number
- Used in select Bard wall mount air conditioners and heat pumps
- 1/5 HP sized for wall mount condenser sections
- 1090 RPM single-speed operation
- 208-230V single phase, 60 Hz, about 1.2 amps
- Permanent split capacitor design
- Clockwise rotation viewed from the lead end
- Enclosed 48Y frame for outdoor-side duty
- Belly-band mounting to match the factory installation
- Same motor Bard now sells as 8103-028BX
Closeout Buying & Installation Notes
- New old stock, never installed and kept on our shelf
- Last unit available at closeout pricing
- Match 8103-016, S8103-016 or 8103-028BX on your parts list
- Confirm clockwise rotation, since Bard also uses CCW motors
- Run capacitor not included, so verify the rating on the nameplate
- Reuse your belly band if it's in good shape
- Set the fan blade at the original position in the shroud
- Check rotation direction at first startup
- Installation by a qualified HVAC technician is recommended
- Disconnect power and discharge the capacitor before service
Specifications & Manuals
Manufacturer documentation for this closeout Bard motor is not posted. For fitment help with your Bard wall mount model and serial number, contact Budget Heating at 813-885-7999 before ordering.
Frequently Asked Questions
Is the Bard 8103-016 the same as the 8103-028BX?
Bard changed the part number from 8103-016 to S8103-016, then S8103-028 and now 8103-028BX. Distributor notes state that no modifications were made to the replacement, so they serve the same position.
How is this different from the Bard 8103-013 motor?
Both are 1/5 HP, 208-230V Bard condenser fan motors, but the 8103-016 turns clockwise at 1090 RPM, while the 8103-013 turns counterclockwise. Use whichever your Bard parts list specifies.
What does "belly-band mount" mean?
The motor is held in place by a metal band that wraps around the motor body and bolts to the unit's fan bracket. The band isn't included, so you'll reuse the one from your existing motor.
Why is rotation direction so important on a wall mount unit?
The condenser fan blade is pitched for one direction. Running it backward moves far less air across the coil, which raises head pressure and can trip the compressor on high pressure.
Which buildings commonly use Bard wall mount units?
Bard wall mount air conditioners and heat pumps are common in schools, modular and portable classrooms, telecom and equipment shelters, and small commercial buildings where an exterior wall-hung unit saves indoor space.
Does the photo show the exact motor I'll receive?
No. The photo is a stock image. This new old stock Bard motor may carry Bard or the motor manufacturer's labeling, and its packaging may differ from the picture.
