4 Ton Bosch IDS Ultra Cold Climate 19 SEER2 R-454B Heat Pump Inverter System, BOVB-60MTB-M19E, BIVB-48MCB-M19X
This 4 ton Bosch IDS Ultra system runs the 4-5 ton BOVB-60MTB-M19E cold climate condenser against the BIVB-48MCB-M19X air handler. That gives larger homes 48,500 BTU/h of heating and cooling with reserve compressor capacity for the coldest nights. Certified under AHRI Reference No. 217895311, the pair is rated at 19 SEER2, 12 EER2 and 10 HSPF2 (Region IV). The AHRI table lists the full 48,500 BTU/h at both heating test points. EVI vapor injection, a base pan heater and Hyper-Link communication make it a strong fit for northern homes that want a heat pump to do the heavy lifting all winter.
Is a 4 Ton Cold Climate Heat Pump System the Right Size?
The system is rated at 48,500 BTU/h in both heating and cooling, with 1,600 CFM of rated heating airflow. It suits larger single-family homes in cold climates where a 3 ton system falls short. Because the condenser also serves 5 ton systems, it operates with headroom when matched to this 4 ton air handler.
A Manual J calculation at your heating design temperature is the right starting point, along with a check of duct capacity at roughly 1,600 CFM. Homes with leaky or undersized ducts may need duct work to get the system's full rated performance. Strong envelopes can often run with little or no electric backup heat.
Ideal for: Larger homes in cold and northern climates, 4 ton conversions from oil, propane or electric heat, and two-story homes served by one system.
Need more capacity? Step up to the 5 Ton Bosch IDS Ultra Cold Climate 19 SEER2 Heat Pump Inverter System, BOVB-60MTB-M19E, BIVB-60MCB-M19X for homes needing up to 55,000 BTU/h of heating.
Recommended applications are general guidelines only. Actual system requirements depend on insulation, climate, ductwork, air leakage, window area and occupancy. Request free sizing assistance, contact Budget Heating, or call 813-885-7999.
What's Included
| Outdoor Condensing Unit | BOVB-60MTB-M19E — 4-5 Ton IDS Ultra Cold Climate Heat Pump Inverter Condenser |
|---|---|
| Indoor Air Handler | BIVB-48MCB-M19X — 4 Ton IDS Ultra Multi-Position Air Handler |
| Application | Cold Climate Ducted Split-System Heat Pump, Heating & Cooling |
| AHRI Rated Performance | 48,500 BTU/h Cooling / 48,500 BTU/h Heating — 19 SEER2, 12 EER2, 10 HSPF2 Region IV (AHRI No. 217895311) |
| Refrigerant | R-454B (A2L) with A2L Refrigerant Sensor in Air Handler |
| Compressor | EVI Vapor Injection Inverter Rotary Compressor |
| Heating Performance | 100% Rated Heating Capacity at 5°F — Operates to -13°F |
| Electrical | 208-230V, Single Phase, 60 Hz Condensing Unit — 39.5 MCA / 50 A Max Fuse (confirm on rating plate) |
| Air Handler Electrical | 208-230V, Single Phase — 7.8 MCA / 10 A Max (without heat kit) |
| Line Set Size | 3/8" Liquid x 7/8" Suction (not included) |
This package includes the BOVB-60MTB-M19E condenser and the BIVB-48MCB-M19X air handler. The condenser's three-row, 18.4 sq. ft. coil drives the air handler's 5.99 sq. ft. coil and 3/4 HP ECM blower. For heavier backup heat, the air handler accepts the 15 kW EHK-15B and 20 kW EHK-20B heat strips, or 3-stage EHK-15I/20I kits.
Condensing Unit & Air Handler Features
BOVB-60MTB-M19E Outdoor Condensing Unit
- 4-5 ton EVI inverter compressor modulating to a 4 ton indoor load
- Three-row, 18.4 sq. ft. outdoor coil with 19.5 fins per inch
- 100% rated heating capacity at 5°F; operation to -13°F
- Base pan heater and crankcase heater built in
- 10-speed ECM fan and compressor sound blanket
- Intelligent Oil Return and EEV refrigerant control
- LTE gateway for EasyAir app monitoring and diagnostics
- Steel louver coil guard and powder paint finish
- Line sets up to 150 ft
- 29-1/8" x 29-1/8" x 43-5/16", 246 lbs. net
BIVB-48MCB-M19X Multi-Position Air Handler
- 3/4 HP constant-torque ECM blower with five speed taps
- 5.99 sq. ft., 4-row all-aluminum coil
- Hyper-Link (M1 M2) communication with the IDS Ultra condenser
- A2L refrigerant sensor and factory TXV
- All five EHK-B kits approved, plus 3-stage EHK-I kits
- 7/8" suction and 3/8" liquid braze connections
- Field convertible to downflow or horizontal left
- Factory-sealed, fully insulated cabinet
- 20" x 22" filter in a tool-less rack
- 54-1/2" x 22" x 24" cabinet, 154 lbs. net
Specifications & Manuals
Product documentation includes condenser and air handler technical specifications, installation instructions, the IDS Ultra service manual and brochure, warranty information and the Bosch product catalog to help with equipment selection, installation and service.
Frequently Asked Questions
Why does the 4 ton IDS Ultra system use a 4-5 ton condenser?
The IDS Ultra lineup has a 3 ton and a 4-5 ton outdoor unit. Bosch AHRI-certifies the BOVB-60MTB-M19E with the 4 ton BIVB-48MCB-M19X at 48,500 BTU/h and 19 SEER2, with the inverter modulating to the indoor coil.
How does the 4 ton IDS Ultra system differ from the 3 ton system?
This system adds about 12,000 BTU/h of heating and cooling and raises rated heating airflow from 1,270 to 1,600 CFM. It uses the larger 54-1/2" air handler with a 3/4 HP blower, a 7/8" suction line and a three-row outdoor coil. Both are rated at 19 SEER2.
Will the 4 ton system lose heating capacity on very cold days?
Bosch rates the IDS Ultra to deliver 100% of its heating capacity at 5°F. For this pairing, its AHRI table lists 48,500 BTU/h at both heating test points. Below 5°F, output begins to taper, and the condenser keeps operating down to -13°F.
What is the difference between EHK-B and EHK-I heat kits?
EHK-B kits are breakered single-point kits from 5 to 20 kW, with 15 and 20 kW models running on two circuits. EHK-15I and EHK-20I are 3-stage kits that stage electric heat in steps. Bosch lists both types for the BIVB-48MCB-M19X.
How far apart can the condenser and air handler be installed?
Bosch allows up to 150 ft of line length with a 50 ft maximum elevation difference, using 3/8" liquid and 7/8" suction lines. The factory charge covers 25 ft of liquid line, and longer runs need a charge adjustment.
What AHRI number covers the 4 ton IDS Ultra system?
The BOVB-60MTB-M19E and BIVB-48MCB-M19X combination is listed under AHRI Reference No. 217895311 at 19 SEER2, 12 EER2 and 10 HSPF2 (Region IV).
Bosch IDS Ultra Condenser Technical Specifications
Bosch IDS Ultra Condenser Installation Instructions
Bosch IDS Ultra Service Manual
Bosch IDS Ultra Air Handler Technical Specifications
