5 Ton Bosch IDS Ultra Cold Climate 19 SEER2 R-454B Heat Pump Inverter System, BOVB-60MTB-M19E, BIVB-60MCB-M19X
This system is Bosch's highest-capacity cold climate heat pump: the BOVB-60MTB-M19E condenser matched with the five-row BIVB-60MCB-M19X air handler. AHRI Reference No. 217895365 rates it at 53,500 BTU/h cooling and 55,000 BTU/h heating, with 19 SEER2, 11.7 EER2 and 10 HSPF2 (Region IV). The EVI inverter compressor holds full rated heating at 5°F and runs to -13°F, while the 3/4 HP ECM blower moves up to 1,820 CFM of rated heating airflow. It's built for large homes in northern climates that want one connected R-454B heat pump system to cover the full winter.
Is a 5 Ton Cold Climate Heat Pump System the Right Size?
With 55,000 BTU/h of heating and 53,500 BTU/h of cooling, this system targets large single-family and two-story homes with heavy winter loads. Its heating output exceeds its cooling output, which fits cold climates where heating drives the equipment choice.
Rated heating airflow of 1,820 CFM requires well-sized returns, supply trunks and filter area. Before ordering, run a Manual J at your local heating design temperature and evaluate the ductwork. If the load or the ducts come in smaller, the 4 ton IDS Ultra system on the same condenser may be the better choice.
Ideal for: Large homes in cold and northern climates, high-load conversions from oil, propane or electric heat, and new construction built around one high-capacity heat pump.
Need less capacity? Consider the 4 Ton Bosch IDS Ultra Cold Climate 19 SEER2 Heat Pump Inverter System, BOVB-60MTB-M19E, BIVB-48MCB-M19X, which uses the same condenser.
Recommended applications are general guidelines only. Actual system requirements depend on insulation, climate, ductwork, air leakage, window area and occupancy. Request free sizing assistance, contact Budget Heating, or call 813-885-7999.
What's Included
| Outdoor Condensing Unit | BOVB-60MTB-M19E — 4-5 Ton IDS Ultra Cold Climate Heat Pump Inverter Condenser |
|---|---|
| Indoor Air Handler | BIVB-60MCB-M19X — 5 Ton IDS Ultra Multi-Position Air Handler |
| Application | Cold Climate Ducted Split-System Heat Pump, Heating & Cooling |
| AHRI Rated Performance | 53,500 BTU/h Cooling / 55,000 BTU/h Heating — 19 SEER2, 11.7 EER2, 10 HSPF2 Region IV (AHRI No. 217895365) |
| Refrigerant | R-454B (A2L) with A2L Refrigerant Sensor in Air Handler |
| Compressor | EVI Vapor Injection Inverter Rotary Compressor |
| Heating Performance | 100% Rated Heating Capacity at 5°F — Operates to -13°F |
| Electrical | 208-230V, Single Phase, 60 Hz Condensing Unit — 39.5 MCA / 50 A Max Fuse (confirm on rating plate) |
| Air Handler Electrical | 208-230V, Single Phase — 7.8 MCA / 10 A Max (without heat kit) |
| Line Set Size | 3/8" Liquid x 7/8" Suction (not included) |
You get the BOVB-60MTB-M19E condenser and the BIVB-60MCB-M19X air handler, the only IDS Ultra indoor unit with a five-row coil. Together they deliver the most heating in the IDS Ultra lineup. Add backup heat with Bosch breakered kits up to the 20 kW EHK-20B heat strip, and connect the units with a 3/8" x 7/8" copper line set.
Condensing Unit & Air Handler Features
BOVB-60MTB-M19E Outdoor Condensing Unit
- 55,000 BTU/h of heating in this matched system
- EVI vapor injection inverter rotary compressor
- Full rated heat at 5°F; operates to -13°F
- Three-row, 18.4 sq. ft. coil with hydrophilic aluminum fins
- Base pan heater, crankcase heater and sound blanket
- 10-speed ECM outdoor fan
- LTE gateway with energy usage tracking in the EasyAir app
- AHRI 1380 demand response with a compatible Bosch thermostat
- Florida Building Code 2010 wind load compliant
- Line sets up to 150 ft with 50 ft elevation
BIVB-60MCB-M19X Multi-Position Air Handler
- Only IDS Ultra air handler with a 5-row coil
- 3/4 HP constant-torque ECM blower designed for four-stage operation
- Rated heating airflow of 1,820 CFM in this pairing
- Hyper-Link (M1 M2) communication, factory default
- A2L refrigerant sensor and factory TXV
- Approved for EHK-05B through EHK-20B and EHK-15I/20I kits
- Multi-position: upflow, downflow, horizontal left or right
- Cabinet sealed to 2% or less air leakage
- 20" x 22" filter in a tool-less rack
- 54-1/2" x 22" x 24" cabinet, 159 lbs. net
Specifications & Manuals
Product documentation includes condenser and air handler technical specifications, installation instructions, the IDS Ultra service manual and brochure, warranty information and the Bosch product catalog to help with equipment selection, installation and service.
Frequently Asked Questions
How is the 5 ton IDS Ultra system different from the 4 ton on the same condenser?
The 5 ton system uses the BIVB-60MCB-M19X with a five-row coil instead of four rows. That raises heating from 48,500 to 55,000 BTU/h and cooling from 48,500 to 53,500 BTU/h, with rated heating airflow climbing from 1,600 to 1,820 CFM. Both are rated at 19 SEER2.
What ductwork does a 5 ton cold climate system need?
Rated heating airflow is 1,820 CFM, and Bosch specifies 300 to 450 CFM per ton for proper operation. Returns, supply trunks and the 20" x 22" filter must be sized to move that air without excessive static pressure. A Manual D duct design is recommended.
How much do the 5 ton condenser and air handler weigh together?
The BOVB-60MTB-M19E weighs 246 lbs. net and the BIVB-60MCB-M19X weighs 159 lbs. net, for a combined 405 lbs. before packaging. Plan for a sturdy pad or stand outdoors and properly framed platforms or closets indoors.
Does the 5 ton system include remote monitoring?
Yes. The condenser has a built-in LTE gateway that works with the Bosch EasyAir app for remote monitoring, energy usage tracking and diagnostics. Bosch notes that cellular signal can vary by location and some connected features may carry a fee.
How loud is the 5 ton IDS Ultra system?
Bosch's sound data lists the 5 ton outdoor unit at 59.9 dB(A) sound power at minimum cooling load and 69.0 dB(A) at rated heating. The air handler is rated at 72 dB(A) on low speed. Installation location and ductwork affect what you hear.
What warranty and AHRI listing apply to this system?
The pairing is listed under AHRI Reference No. 217895365. Bosch provides a 10-year residential limited warranty on the compressor and internal components, and completing warranty registration adds a 90-day labor allowance.
Bosch IDS Ultra Condenser Technical Specifications
Bosch IDS Ultra Condenser Installation Instructions
Bosch IDS Ultra Service Manual
Bosch IDS Ultra Air Handler Technical Specifications
