Universal Control Transformer — 120V to 24 VAC, 40 VA
This is a universal HVAC control transformer that steps 120-volt line power down to 24 VAC to power thermostats, control boards, relays, contactors, and gas valves. Rated at 40 VA, it supplies ample low-voltage power for most residential and light-commercial control circuits. The “no wire leads” version uses screw terminals for a clean, serviceable connection, making it a versatile replacement when a failed transformer has left a system with no 24-volt control power.
Will This Transformer Work for Your System?
A 120V-primary, 24V-secondary, 40 VA transformer is one of the most common control transformers in HVAC. It is a universal replacement, but you must confirm two things: that your equipment's primary voltage is 120V (not 208/240V) and that your control circuit's VA draw is within the 40 VA rating. For higher-draw circuits, a larger VA transformer may be required.
Wiring is straightforward: with power disconnected, connect the 120V line to the primary terminals and the 24V control circuit to the secondary terminals. A blown transformer is often a symptom of a shorted low-voltage wire or component, so find and correct the cause before energizing the replacement.
Use for: 120V equipment needing 24 VAC control power up to 40 VA — thermostats, boards, relays, contactors, and gas valves.
Replacing a control board too? See the Goodman PCBDM133S control board, which a transformer like this powers.
Replacement parts are application-specific. Confirm the exact part number and your unit's model and serial number before ordering. Need help confirming fitment? Request free assistance, contact Budget Heating, or call 813-885-7999.
What's Included
| Product Type | Universal Control Transformer |
|---|---|
| Primary Voltage | 120 V |
| Secondary Voltage | 24 VAC |
| Rating | 40 VA |
| Connection | Screw terminals (no wire leads) |
| Application | Residential & light-commercial HVAC control circuits |
A versatile low-voltage transformer for most 120V control circuits. If you are replacing a failed control board at the same time, see the PCBDM133S board, or contact us for help sizing the right transformer.
Part Details
Transformer & Function
- Steps 120V line power down to 24 VAC control voltage
- 40 VA rating powers most control circuits
- Feeds thermostats, control boards, relays, contactors, gas valves
- Screw-terminal (no-lead) design for a clean, serviceable connection
- Universal replacement for common 120V/24V transformers
Sizing & Installation
- Confirm your equipment primary is 120V (not 208/240V)
- Verify control-circuit draw is within 40 VA
- Wire 120V to primary, 24V circuit to secondary, power off
- Correct any shorted low-voltage wiring before energizing
- For installation by a qualified technician
Specifications & Manuals
Universal 120V-to-24 VAC, 40 VA control transformer with screw terminals. Confirm your equipment's primary voltage and control-circuit VA load before installing; always de-energize before wiring.
Frequently Asked Questions
What does this transformer do?
It converts 120-volt line power to 24 VAC low-voltage control power for thermostats, control boards, relays, contactors, and gas valves.
Is it universal?
Yes, it is a universal control transformer. Just confirm your equipment uses a 120V primary and that the control load is within the 40 VA rating.
What does 40 VA mean?
VA (volt-amps) is the transformer's power capacity. 40 VA is enough for most residential and light-commercial control circuits.
What does “no wire leads” mean?
It uses screw terminals instead of pre-attached wire pigtails, giving a clean, serviceable connection.
Why did my old transformer fail?
Usually a short in the low-voltage wiring or a failed component. Find and fix the cause before powering the new transformer, or it may fail too.
