Rheem R802V1004A17UHSCAP 100,000 BTU 80% AFUE Two-Stage Variable-Speed Gas Furnace
The Rheem R802V1004A17UHSCAP is a 100,000 BTU/hr input, 80% AFUE gas furnace from the Rheem Endeavor Line Classic Plus Series. It pairs two-stage gas heating with a 3/4 HP variable-speed ECM blower in a compact 17.5" upflow/horizontal cabinet, delivering quiet, even, draft-free warmth for larger residential homes while supporting cooling airflow up to a nominal 4 tons. Factory-configured for natural gas and field-convertible to propane, it is an ideal furnace upgrade or new-system foundation for homeowners and HVAC contractors who want multi-stage comfort without the cost of a 90%+ condensing furnace.
Is a 100,000 BTU Furnace the Right Size?
With 100,000 BTU/hr of heating input and roughly 80,000 BTU/hr of delivered heat output, the R802V1004A17UHSCAP is built for larger homes or homes in colder climates. As a general guideline it suits homes in the range of about 2,000 to 2,800 square feet, though the correct size always depends on the heat loss of the specific structure rather than square footage alone.
Proper furnace sizing is driven by insulation levels, window area and quality, ceiling height, ductwork design, air infiltration, regional climate, and the cooling tonnage the blower must also support. This model carries a 4-ton nominal cooling drive (up to 1,650 CFM), which makes it a strong match for homes running a 3- to 4-ton air conditioner or heat pump. Oversizing a furnace causes short-cycling and uneven temperatures, while undersizing leaves a home short on the coldest days.
Ideal for: larger single-family homes, two-story homes, and moderate-to-cold climate installations needing two-stage comfort paired with up to 4-ton cooling airflow.
Need more heat? Step up to the Rheem 125,000 BTU R802V1255A24UHS Two-Stage Variable-Speed Furnace. Heating a smaller home? Drop down to the Rheem 75,000 BTU R802V0755A21UHS furnace. Need the same 100K heat with more airflow? Compare the 5-ton-drive R802V1005A21UHS (21" cabinet).
Recommended heating applications are general guidelines only. Actual furnace sizing depends on a Manual J load calculation accounting for insulation, climate, ductwork, and air infiltration. Request free sizing assistance, contact Budget Heating, or call 813-885-7999.
Key Specifications
| Model / MPN | R802V1004A17UHSCAP |
|---|---|
| Series | Rheem Endeavor Line Classic Plus |
| Fuel & Efficiency | Natural Gas (LP convertible) — 80% AFUE |
| Heating Input | 100,000 BTU/hr |
| Heating Output | 80,000 BTU/hr (High) / 56,000 BTU/hr (Low) |
| Heating Stages | Two-Stage |
| Blower Motor | 3/4 HP Variable-Speed ECM, Constant CFM |
| Cooling Airflow | Up to 1,650 CFM (4-Ton Nominal Drive) |
| Temperature Rise | 35–65°F (High) / 25–55°F (Low) |
| Airflow Orientation | Upflow / Horizontal |
| Ignition | Rheem PlusOne Direct Spark Ignition |
| Gas Connection | 1/2" NPT |
| Electrical | 115V, 60 Hz, 1 Phase (MCA 16A) |
| Cabinet Width | 17.5" |
| Dimensions (W × H × D) | 17.5" × 34" × 29.59" |
| Shipping Weight | 120 lbs |
| Warranty | 10-Year Parts (registered) + Limited Lifetime Heat Exchanger |
This furnace ships ready for natural gas and converts to propane with the correct Rheem LP conversion kit. Its insulated, solid-bottom cabinet and variable-speed airflow make it one of the quieter 80% furnaces in its class, and the EcoNet-enabled control allows smart-thermostat integration.
R802V Features & System Pairing
Two-Stage Variable-Speed Performance
- 80% AFUE certified gas heating for lower operating cost than older 60–70% furnaces
- Two-stage gas valve runs on low capacity most of the time for steadier, quieter heat
- 3/4 HP variable-speed ECM blower delivers consistent, draft-free airflow
- Constant CFM technology maintains airflow as filters load and static pressure changes
- Rheem PlusOne Diagnostics with 7-segment LED simplifies installation and service
- PlusOne direct spark ignition for dependable, pilotless lighting
- Insulated, solid-bottom cabinet reduces operating sound
- Compact 17.5" cabinet fits tight closets and utility spaces
- Upflow and horizontal installation flexibility
- EcoNet enabled for smart-home thermostat control
Build a Complete Rheem System
- 4-ton nominal blower drive supports up to a 3.5–4 ton cooling match
- Pair with the matching 4-Ton Rheem Cased Evaporator Coil (RCFY4824STANMC)
- Add cooling with a matching unit from our Rheem air conditioner condensers
- Control it with the Rheem EcoNet 800 Series Wi-Fi Smart Thermostat
- Field-convertible to propane (LP) with the correct Rheem conversion kit
- Natural gas ready out of the box — no extra parts for most installs
- Standard-NOx model accepted in most U.S. jurisdictions
- Ideal replacement for aging single-stage 80% furnaces
- Great foundation for a new split-system heating and cooling package
- Backed by Rheem's 10-year registered parts warranty
Specifications & Manuals
Product documentation includes the R802V technical specification sheet covering dimensions, airflow, electrical data, and performance ratings to assist with equipment selection, installation, and service.
Frequently Asked Questions
What size home can the R802V1004A17UHSCAP 100,000 BTU furnace heat?
With about 80,000 BTU/hr of delivered output, this furnace is generally suited to larger homes in the 2,000–2,800 sq ft range, depending on climate, insulation, and ductwork. A Manual J load calculation is the only accurate way to confirm sizing.
Why choose two-stage heating with a variable-speed blower?
Two-stage heating runs on a lower, quieter setting during milder weather and only ramps to full capacity on the coldest days. Combined with the variable-speed ECM blower, it produces steadier temperatures, better humidity control, and noticeably less noise than a single-stage furnace.
Which installation orientations does this R802V furnace support?
The R802V1004A17UHSCAP is a UHS model designed for upflow and horizontal installations, making it suitable for closets, basements, and attic or crawlspace applications.
Can this furnace run on propane (LP)?
Yes. It ships factory-configured for natural gas and can be converted to propane using the correct Rheem LP conversion kit for the R802V series. Conversion should be performed by a qualified technician.
What air conditioner and coil should I pair with this 100K BTU furnace?
Its blower supports up to a nominal 4-ton cooling match. Pair it with a 3.5–4 ton Rheem condenser from our air conditioner condensers and the matching 4-ton Rheem cased coil for a complete split system.





R802V Technical Specifications