ICP Metering Device .052 Chatleff Piston, 1174060
The ICP 1174060 is a .052 metering piston made by International Comfort Products. It sits in the middle of our ICP piston range and is one of the most commonly replaced sizes. Because ICP manufactures Heil, Tempstar, Comfortmaker, Arcoaire, Day & Night, KeepRite, AirQuest, EcoTemp, and GrandAire equipment, this one OEM part number serves any of those units whose parts list specifies a .052. It's a go-to for residential service techs, property maintenance teams, and homeowners working with a licensed contractor.
Is the .052 Piston the Right Size?
On our site the .052 is listed as a general reference for about 2.5 to 3-ton systems. ICP's own equipment also uses this size in larger units, including the PDD460090K gas/electric and PHD460 package models, which shows the piston follows the equipment design, not a simple tonnage rule.
To confirm, read the size stamped on the old piston and check it against the unit's parts list or charging chart. If both read .052, part 1174060 is the factory-correct replacement. If they disagree, contact us before ordering.
Ideal for: Replacing .052 pistons in ICP-built Heil, Tempstar, Comfortmaker, Arcoaire, Day & Night, KeepRite, AirQuest, EcoTemp, and GrandAire air conditioners, heat pumps, and package units.
Need a larger bore? Step up to the ICP .061 Metering Piston, 1173663, or step down to the ICP .046 Metering Piston, 1173650.
Tonnage references are general guidelines only. Always match the piston to the size specified by the equipment manufacturer for your exact model. Request free sizing assistance, contact Budget Heating, or call 813-885-7999.
What's Included
| Manufacturer | International Comfort Products (ICP) |
|---|---|
| Part Number | 1174060 |
| Piston Size | .052 |
| Type | Chatleff Metering Piston |
| Quantity | One (1) Piston |
| Brands Built by ICP | Heil, Tempstar, Comfortmaker, Arcoaire, Day & Night, KeepRite, AirQuest, EcoTemp, GrandAire |
| OEM Examples | PDD460090K and PHD460 Package Units |
| Store Sizing Reference | Approx. 2.5 – 3 Ton (verify against your unit) |
You'll receive one ICP 1174060 .052 piston. To finish the job, our copper fittings, insulation, and accessories cover the small items that often get replaced along with a metering device.
Piston Features & Brand Compatibility
ICP 1174060 .052 Chatleff Piston
- Genuine International Comfort Products part 1174060
- .052 bore, the middle of the ICP piston range
- Chatleff-type fixed metering piston
- Controls refrigerant feed into the evaporator
- Used in ICP split systems and package units
- Listed for ICP PDD460 and PHD460 package models
- Restores OEM metering without guesswork
- One of the most commonly replaced piston sizes
- Sold individually
- Usually ships in 2 to 3 business days
Fits ICP-Built Brands
- Heil
- Tempstar
- Comfortmaker
- Arcoaire
- Day & Night
- KeepRite
- AirQuest
- EcoTemp
- GrandAire
- Learn more in our AirQuest HVAC review and comparison
Frequently Asked Questions
What equipment uses the ICP 1174060 piston?
Any ICP-built unit whose parts list calls for a .052 piston. Examples in ICP's catalog include the PDD460090K and PHD460 package units.
Is the .052 piston used in package units as well as split systems?
Yes. ICP uses fixed metering pistons in both split-system and package equipment. Your model's parts list will show the exact size.
My old piston is unreadable. How do I find the size?
Look up your outdoor or package unit's model number in its parts list or charging chart, or contact Budget Heating with the model and serial number.
Are Heil and Tempstar pistons the same part?
Heil and Tempstar are both built by ICP and share ICP part numbers. When their parts lists call for 1174060, it's the same piston.
Should I replace the filter drier when I change the piston?
It's widely considered good practice whenever the refrigerant system is opened. See our filter driers.
What are signs that a piston needs replacing?
A restricted or damaged piston can cause symptoms such as poor cooling, abnormal pressures, or frost on lines. A technician should diagnose the cause before replacing parts.
