5 Ton Goodman GZV9SA6010 19 SEER2 R-32 Side Discharge Heat Pump Condenser
The Goodman GZV9SA6010 is the top-capacity 5-ton (60,000 BTU/h) variable-speed inverter heat pump condenser in the GZV9S side-discharge line, built for the largest homes and heaviest loads. Running on R-32 refrigerant at 19 SEER2, its inverter compressor delivers maximum output when demand peaks and quietly scales back the rest of the time, providing whole-home comfort and dependable heat-pump heating even in cold weather.
Is a 5-Ton Heat Pump the Right Size?
The 5-ton GZV9SA6010 is the maximum residential capacity in this series and is reserved for large or two-story homes, sprawling single-level floor plans, and properties with high ceilings or significant heat gain. A variable-speed compressor is what makes this much capacity practical: it can deliver full output on the hottest and coldest days, then throttle down to avoid the short-cycling and uneven temperatures that plague oversized single-stage systems.
Capacity this large should never be chosen by square footage alone. Only a Manual J load calculation that weighs insulation, window area, duct capacity, ceiling height, and climate can confirm that a 5-ton unit is genuinely required rather than oversized.
Ideal for: large or two-story homes, expansive open floor plans, and high-load properties needing maximum whole-home capacity.
Not sure you need this much? Step down to the 4 Ton Goodman GZV9SA4810 condenser for larger-but-not-maximum loads.
Recommended applications are general guidelines only. Confirm that maximum capacity is warranted with our tonnage & BTU calculator, request free sizing help, or call 813-885-7999.
Key Specifications
| Model (MPN) | GZV9SA6010 |
|---|---|
| Nominal Capacity | 5 Ton — 60,000 BTU/h |
| Efficiency | 19 SEER2 / up to 9.0 HSPF2 (variable-speed inverter) |
| Refrigerant | R-32 |
| Compressor | Variable-Speed Inverter-Driven Swing Compressor |
| Air Discharge | Side Discharge |
| Sound Level | Approximately 71 dBA (standard cooling) |
| Electrical | 208-230V / 1 Phase / 60 Hz (dedicated circuit; size per rating plate) |
| Heating Operation | Reliable heating down to -20°F |
| Cabinet | Galvanized steel with corrosion-resistant finish |
| Cabinet Dimensions | 37" W × 12-5/8" D × 56-5/16" H |
| Approx. Weight | 265 lb |
| Controls | Communicating system — requires a Goodman approved communicating thermostat |
| AHRI-Matched Indoor (tested) | AHVE60DP1300 air handler |
| Warranty | 10-Year Parts Limited Warranty & 10-Year Unit Replacement Limited Warranty (with timely registration) |
Sold as the outdoor condensing unit only. Match the GZV9SA6010 with a compatible Goodman R-32 EEV-equipped air handler or coil, such as the tested AHVE60DP1300 air handler, for full system performance.
Features & Benefits
Maximum Capacity & Efficiency
- Top-of-line 60,000 BTU/h output for the largest homes and heaviest loads
- Inverter compressor pairs peak capacity with quiet, efficient part-load operation
- 19 SEER2 efficiency helps control energy costs on a large system
- Up to 9.0 HSPF2 heat-pump heating for whole-home comfort year-round
- Dependable cold-weather heating down to -20°F
- Communicating controls provide precise capacity staging and active diagnostics
Design & Durability
- Slim side-discharge cabinet places maximum capacity in a compact footprint
- Low-GWP R-32 refrigerant aligned with current environmental standards
- Heavy-gauge galvanized steel cabinet with corrosion-resistant finish
- Factory-installed stop valves accept field-run refrigerant copper
- Bi-flow filter drier included for on-site installation on the liquid line
- Backed by a 10-year parts and 10-year unit replacement limited warranty
Specifications & Manuals
Product documentation includes technical specifications, installation instructions, and service information to assist with equipment selection, installation, and maintenance.
Frequently Asked Questions
Is the GZV9SA6010 5-ton large enough for a big or two-story home?
The 5-ton is the maximum capacity in the GZV9S series and is intended for large or two-story homes and high-load properties. Confirm the requirement with a Manual J calculation so the system is not oversized.
What makes the GZV9SA6010 different from the 4-ton model in the same series?
Beyond its higher 60,000 BTU/h capacity, the 5-ton is a heavier unit (about 265 lb) built to handle the largest residential loads, while sharing the same slim side-discharge cabinet, R-32 refrigerant, and inverter platform as the 4-ton.
How energy efficient is a variable-speed 5-ton like the GZV9SA6010?
It is branded at 19 SEER2 with up to 9.0 HSPF2 heating efficiency. The inverter compressor keeps efficiency high by running at lower speeds during partial loads rather than cycling at full power.
What refrigerant does the GZV9SA6010 use and why does it matter?
It uses R-32, a next-generation refrigerant with a lower global warming potential than R-410A and strong heat-transfer efficiency, which supports both performance and current environmental standards.
Can the GZV9SA6010 be installed in tight side-yard spaces?
Yes. Its slim 37" × 12-5/8" side-discharge cabinet is designed to fit narrower setbacks than a conventional top-discharge unit, making it practical even for large-capacity installs on constrained lots.
GZV9S Technical SpecificationsGZV9S Installation InstructionsGZV9S Service ManualGZV9S Warranty Certificate
