EcoTemp 4 Ton 15 SEER2 AC & 120,000 BTU Condensing Gas Furnace – 24-1/2" Cabinet System
This is the full-size package for large homes in cold climates. The W5A5S48AKAWA 4 ton R-454B condenser and the 24-1/2 in. W5AM61M24XA coil deliver 48,000 BTU of cooling at 15 SEER2 (AHRI 215165184). The WFSX120D066B, the largest furnace in the WFSX series, produces 116,000 BTU of heat at up to 96.1% AFUE through a 1 HP ECM blower with 1,965 CFM of heating airflow. Builders, contractors, and homeowners with roughly 2,000 to 2,500 square feet in northern markets get both a large cooling capacity and the line's biggest burner in one AHRI-matched system.
Is a 4 Ton System with a 120K Furnace the Right Size?
This system suits homes where both seasons are demanding: large two-story homes in the Midwest and Northeast, homes with finished basements, and properties at elevation where the furnace derates 4% per 1,000 ft above 2,000 ft. The 116,000 BTU output covers heat loss beyond what the 100K version (97,000 BTU) can deliver.
Before committing, compare the calculated heat loss with both furnace outputs, and check that supply and return ducts can carry the higher heating airflow. The 24-1/2 in. width and the 70 in. combined height of the furnace and coil also need to fit the mechanical room. A Manual J load calculation plus a duct inspection is the right starting point.
Ideal for: Large homes in cold climates, two-story homes with basements, high-elevation properties, and replacements of an existing 120K furnace and 4 ton AC.
Need more capacity? Step up to the EcoTemp 5 Ton 100K BTU Gas System (W5A5S60AKAWA) or the 5 ton 120K version for more cooling.
Recommended applications are general guidelines only. Actual system requirements depend on insulation, ductwork, climate, elevation, and a proper load calculation. Request free sizing assistance, contact Budget Heating, or call 813-885-7999.
What's Included
| Outdoor Condenser | W5A5S48AKAWA — 4 Ton Single-Stage R-454B Air Conditioner |
|---|---|
| Indoor Coil | W5AM61M24XA — Multipoise Cased A-Coil, 24-1/2" Wide, Factory TXV |
| Gas Furnace | WFSX120D066B — 120,000 BTU Input / 116,000 BTU Output Condensing Furnace |
| Furnace Cabinet Width | 24-1/2" (35" tall) |
| Cooling Efficiency | 15 SEER2 (AHRI 215165184) |
| Heating Efficiency | 96.1% AFUE Upflow & Horizontal / 95% AFUE Downflow |
| Refrigerant | R-454B |
| Compressor | Single-Stage Scroll Compressor |
| Condenser Electrical | 208/230V, Single Phase, 60 Hz — 29.1 MCA, 50A Max Fuse/Breaker |
| Furnace Electrical | 115V, Single Phase, 60 Hz — 17.4 Unit Ampacity, 12 AWG Min., 20A Breaker |
| Manufacturer Warranty | 10-Year Parts with Timely Registration; 20-Year Furnace Heat Exchanger |
The WFSX120D066B furnace and the W5AM61M24XA coil are both 24-1/2 in. wide, and together they stand about 70 in. tall. Because the furnace's heating airflow exceeds 1,800 CFM, the return air must be bottom, two-side, or bottom-plus-side. Plan the return plenum and a 20 x 25 in. minimum filter size from the start. Add a programmable thermostat and a correctly sized line set to complete the installation.
Condenser, Coil & Furnace Features
W5A5S48AKAWA Condenser & W5AM61M24XA Coil
- 4 ton single-stage scroll compressor with internal thermal overload
- 15 SEER2 AHRI-certified with this coil and furnace
- Two-row condenser coil with 17.7 sq. ft. of face area
- 3,100 CFM direct-drive fan with vertical discharge
- 75 dBA sound rating, with an optional sound blanket kit
- Long-line capable to 250 ft equivalent with the required accessories
- W5AM61M24XA: 35 in. tall, 24-1/2 in. wide, about 92 lb
- 7/8 in. suction connection with sweat joints ready for brazeless fittings
- Refrigerant sensor factory installed for R-454B leak detection
- Split delta plate and front-removable coil for cleaning
WFSX120D066B 120K BTU Condensing Furnace
- 120,000 BTU input, 116,000 BTU output, six burners
- 96.1% AFUE upflow and horizontal; 95.0% downflow
- Widest WFSX "D" cabinet at 24-1/2 in., 35 in. tall
- 1 HP constant-torque ECM blower: 1,965 CFM heating
- Cooling airflow range up to 2,240 CFM
- 17.4 unit ampacity on a 115V, 20 amp circuit
- Direct vent, single-pipe, or concentric venting options
- Enhanced 3-digit diagnostics with NFC setup
- Convertible to propane with the gas conversion kit
- Meets ENERGY STAR 5.0 South criteria
Specifications & Manuals
Documentation includes condenser, coil, and furnace product data, installation instructions, line-set and venting tables, wiring diagrams, and warranty terms for selection, installation, and service.
Frequently Asked Questions
Does the 120K furnace need a special return-air setup?
Yes. Airflows above 1,800 CFM require a bottom return, two-side returns, or bottom and side returns, with a minimum filter size of 20 x 25 in. The WFSX120D066B's rated heating airflow is 1,965 CFM.
How does this system differ from the 4 ton 100K version?
This version uses the 24-1/2 in. WFSX120D066B with 116,000 BTU of output, compared with 97,000 BTU from the 21 in. 100K furnace. The cooling rating is 15 SEER2 here versus 15.2 SEER2 on the 100K system.
Is a time-delay relay needed with this system?
Most indoor controls already include a blower off-delay, and the WFSX has an adjustable cooling off-delay (90 seconds factory set). A separate time-delay relay is only called for when the AHRI listing specifies one.
Should the condenser be raised off the pad?
The manufacturer's support feet accessory raises the unit 4 in. and is suggested for coastal installations, windy or debris-prone sites, rooftops, and improved sound. It lets dirt flush out from under the base to limit corrosion.
Can the WFSX120D066B be installed downflow?
Yes. It is approved for upflow, downflow, and horizontal left or right. In the downflow position it is rated 95.0% AFUE. Downflow over combustible floors may require a base kit per the installation instructions.
What heating airflow does the WFSX120D066B deliver?
1,965 CFM at a rated heating external static pressure of 0.20 in. w.c., driven by a 1 HP ECM motor and an 11 x 11 in. blower wheel.
W5A5S Technical Specifications
W5A5S Installation Instructions
W5A5S Customer Brochure
W5AM Technical Specifications
W5AM Installation Instructions
WFSX Technical Specifications
WFSX Installation Instructions
ICP Warranty Certificate

