4 Ton EcoTemp 13.4 SEER2 R-454B Straight Cool Package Unit WPA548A000RKB
The EcoTemp WPA548A000RKB brings 4 tons of whole-home cooling to one straight cool package unit. A full 1 HP ECM blower moves 1,600 CFM, and a large 23.3 sq ft outdoor coil, the biggest single-row coil in the WPA5 line, supports 46,000 BTUh of rated cooling at 13.4 SEER2. It is factory charged with R-454B, converts between downflow and horizontal, and accepts electric heaters up to 20 kW. It is a strong choice for large homes and light commercial buildings in warm climates. See all 4 ton straight cool package units.
Is a 4 Ton Straight Cool Package Unit the Right Size?
A 4 ton package AC fits cooling loads of about 46,000 to 48,000 BTUh, which usually means larger floor plans, high ceilings, lots of glass, or commercial spaces with heat-producing equipment. Moving from 3.5 to 4 tons adds 6,000 BTUh of rated cooling and steps the blower up to 1 HP. That extra blower power helps when ducts are long or the system serves multiple floors.
Make sure the existing ductwork can carry 1,600 CFM. Undersized returns are one of the most common reasons a larger unit underperforms. If you add electric heat, size the heater for your coldest expected weather. The unit requires at least 1,600 CFM with any heater installed.
Ideal for: Large single-family homes in warm climates, open-concept floor plans, and light commercial spaces such as offices, clinics, and shops with 4 ton cooling loads.
Need more capacity? Step up to the 5 Ton EcoTemp Straight Cool Package Unit WPA560A000RKB, the largest WPA5.
Recommended applications are general guidelines only. Actual system requirements depend on insulation, ductwork, climate, window area, occupancy, and a proper load calculation. Request free sizing assistance, contact Budget Heating, or call 813-885-7999.
What's Included
| Package Unit | WPA548A000RKB: 4 Ton Single-Packaged Air Conditioner (Straight Cool) |
|---|---|
| Cooling Capacity | 46,000 BTUh Rated (48,000 BTUh Nominal), 1,600 CFM |
| Efficiency | 13.4 SEER2 / 11.05 EER2 |
| Refrigerant | R-454B, Factory Charged, with Leak Detection Dissipation System |
| Compressor | Scroll Compressor |
| Optional Electric Heat | 5, 7.2, 10, 15, or 20 kW Heater (Sold Separately) |
| Airflow Configuration | Convertible Downflow or Horizontal, Insulated Horizontal Duct Covers Included |
| Electrical | 208/230V, Single Phase, 60 Hz; 32.3 MCA, 50 Amp Max Fuse/Breaker (Without Heater) |
The WPA548A000RKB is the largest WPA5 that works with the NPDUCFLG002A00 square to round transition set, on horizontal duct flanges only. On a roof, it fits the CPRFCURB013B00 curb. Heater options include the 10 kW breakered heat strip, 15 kW breakered heat strip, and 20 kW breakered heat strip. To understand SEER2 efficiency ratings at this size, read our SEER2 guide.
Cooling System & Cabinet Features
WPA548A000RKB Cooling System
- 46,000 BTUh rated cooling for 4 ton loads
- 1 HP ECM indoor blower rated for 1,600 CFM
- 13.4 SEER2 / 11.05 EER2 performance
- 23.3 sq ft single-row outdoor coil, the largest in the series
- Scroll compressor rated 19.4 RLA / 102 LRA
- 3-row indoor coil with 5.6 sq ft face area
- Orifice metering with liquid filter drier
- R-454B with leak detection dissipation, 106 sq ft minimum conditioned space
- High-pressure switch protection
- 75 dBA rated sound level
WPA548A000RKB Cabinet & Installation
- Largest WPA5 compatible with the square to round transition set
- Accepts 5 kW through 20 kW electric heaters
- 1,600 CFM minimum airflow with electric heat
- Economizers CPECOMZR009A00 and CPECOMZR012A00 available
- Outdoor enthalpy control AXB078ENT for economizer use
- Outdoor coil louver panels CPLOUVER019A00
- Composite basepan with integrated, sloped drain pan
- Metal base rails for rigging and stability
- Prepainted, zinc-coated steel cabinet
- Approved for installation up to 10,000 ft
Specifications & Manuals
Product documentation includes WPA5 technical specifications with performance, electrical, electric heater, and accessory data, the product brochure, and EcoTemp warranty terms to assist with equipment selection, installation, and service.
Frequently Asked Questions
How does the 4 ton WPA548A000RKB compare with the 3.5 ton WPA5?
Rated cooling rises from 40,000 to 46,000 BTUh, the blower steps up from 3/4 HP to 1 HP, and airflow increases from 1,350 to 1,600 CFM. Electrical moves to 32.3 MCA with a 50 amp maximum breaker without a heater.
How big is the outdoor coil on the 4 ton WPA5?
The WPA548A000RKB uses a single-row outdoor coil with 23.3 sq ft of face area, the largest single-row coil in the WPA5 series. It is paired with a 26-inch, 3,500 CFM outdoor fan.
What circuit does the WPA548A000RKB need with a 20 kW heater?
With a 20 kW heater installed, the manufacturer lists an MCA of 98.9/112.8 amps at 208/230V and maximum overcurrent protection of 100/125 amps.
Does the 4 ton WPA5 work with the square to round transition set?
Yes. The NPDUCFLG002A00 set covers sizes 24 through 48, so the 4 ton is the largest WPA5 it fits. It is used with horizontal duct flanges only.
What airflow does an electric heater need on the WPA548A000RKB?
The manufacturer requires at least 1,600 CFM for safe heater operation on size 48. That matches the unit's nominal cooling airflow.
Can I add outdoor-air economizer control to the WPA548A000RKB?
Yes. Sizes 36, 48, and 60 use the CPECOMZR009A00 vertical or CPECOMZR012A00 horizontal economizer. The AXB078ENT outdoor enthalpy control can be added as a field-installed accessory.

WPA5 Technical Specifications