2 Ton EcoTemp 13.4 SEER2 R-454B Heat Pump Package Unit, WJH524000K000B
The EcoTemp WJH524000K000B is a 2 ton, R-454B packaged heat pump built by International Comfort Products (ICP) for manufactured housing, residential and light-commercial applications. It delivers 24,000 BTU/h of cooling at 13.4 SEER2 and 11.05 EER2, and 23,000 BTU/h of heat pump heating at 47°F (6.7 HSPF2), all from a compact horizontal cabinet. With a 70 dBA sound rating, the quietest in the WJH5 line, it suits small homes, single-section manufactured homes and additions where noise and space both matter.
Is a 2 Ton Heat Pump Package Unit the Right Size?
The WJH524000K000B fits cooling loads near 24,000 BTU/h with about 800 CFM of rated airflow. That typically means smaller manufactured homes, cottages, condos with ground-level pad space and compact offices. Heating output falls from 23,000 BTU/h at 47°F to 12,300 BTU/h at 17°F, so backup electric heat is common where winters get cold.
Insulation, window area, duct condition, local climate and occupancy all affect sizing. Because R-454B is an A2L refrigerant, EcoTemp also lists a minimum conditioned space area (91 sq. ft. for this size). Learn more in our refrigerant transition guide.
Ideal for: Single-section manufactured homes, small houses, condos, additions and compact offices that need quiet, all-in-one heating and cooling.
Need more capacity? Step up to the 2.5 Ton EcoTemp WJH530000K000B Heat Pump Package Unit for 28,600 BTU/h of cooling and 1,000 CFM.
Recommended applications are general guidelines only. Actual system requirements depend on a load calculation, insulation, ductwork, climate, occupancy, and local code requirements. Request free sizing assistance, contact Budget Heating, or call 813-885-7999.
What's Included
| Packaged Unit | WJH524000K000B — 2 Ton R-454B Packaged Heat Pump |
|---|---|
| Cooling Capacity | 24,000 BTU/h (AHRI) |
| Heating Capacity | 23,000 BTU/h at 47°F / 12,300 BTU/h at 17°F |
| Efficiency | 13.4 SEER2, 11.05 EER2, 6.7 HSPF2 |
| Refrigerant | R-454B, Factory Charged (5.8 lb), Leak Detection Dissipation System |
| Compressor | Scroll Compressor With Internal High-Pressure and Overcurrent Protection |
| Indoor Blower | Direct-Drive Multi-Speed, 1/3 HP, 800 Rated CFM |
| Duct Connections | Horizontal Supply and Return (Start Collars Provided) |
| Electrical | 208/230V, Single Phase, 60 Hz (16 MCA, 25 A Max Overcurrent) |
| Backup Heat | 5, 7.5 or 10 kW Accessory Electric Heater (Sold Separately) |
Every WJH5 shares the same 32" x 51" footprint, and the 2 ton is the lightest at a 303 lb shipping weight, with hand-holds built into the basepan for easier positioning. The single-piece composite base won't rust, and it's sloped with an integrated drain to limit standing water. A louvered coil enclosure helps protect against hail and vandalism.
Heat Pump & Cabinet Features
WJH524000K000B Heating & Cooling Performance
- 24,000 BTU/h cooling at 13.4 SEER2 / 11.05 EER2
- 23,000 BTU/h heating at 47°F, 3.7 C.O.P.
- 6.7 HSPF2 heating efficiency
- Hermetic scroll compressor with internal protection
- Time/temperature defrost that runs only when needed
- Direct-drive, multi-speed indoor blower
- PSC outdoor fan motor with cooling operation down to 40°F
- Liquid-line filter drier
- Factory-installed R-454B leak detection dissipation system
- Quietest WJH5 size at 70 dBA
WJH524000K000B Cabinet & Installation
- Compact 32" x 51" footprint shared by every WJH5 size
- Corrosion-proof composite base with sloped integrated drain
- Watertight steel cabinet with corrosion-resistant finish
- Louvered coil enclosure for hail and vandal protection
- Front and side service access with multiple side panels
- Hand-holds built into the basepan
- Duct start collars included
- Cabinet leakage under 2.0% at 1.0 in. W.C. (ASHRAE 193)
- Single-point wiring with accessory heaters
- Designed for manufactured housing and residential use
Specifications & Manuals
Product documentation includes AHRI ratings, physical and electrical data, accessory heater combinations, performance tables, wiring schematics, installation guidance and warranty terms.
Frequently Asked Questions
Is the WJH524000K000B suitable for a manufactured home?
Yes. EcoTemp designs the WJH5 for manufactured housing as well as residential and light-commercial use. The compact horizontal cabinet and included duct start collars make it a common choice for single-section homes.
How quiet is the 2 ton EcoTemp package heat pump?
EcoTemp rates the WJH524000K000B at 70 dBA, the lowest in the WJH5 series, thanks in part to an aerodynamic fan blade design.
Which electric heaters are approved for the WJH524000K000B?
The 2 ton accepts 5 kW (CPHEATER125A00 or breakered CPHEATER126A00), 7.5 kW (CPHEATER127A00 or breakered CPHEATER128A00) and 10 kW breakered (CPHEATER130A00) heaters. Heaters are rated at 240V. At 208V, output is about 75% of the rated kW.
What is the minimum room area for this R-454B unit?
Because R-454B is a mildly flammable A2L refrigerant, EcoTemp lists a 91 sq. ft. minimum conditioned space area for the 2 ton WJH5, along with a required minimum dissipation airflow of 160 CFM.
What warranty does the EcoTemp WJH524000K000B carry?
ICP's warranty for WJH5 package units provides a 1-year unit replacement limited warranty for the original owner, plus a 10-year parts limited warranty (including compressor and coil) when registered within 90 days of installation. Without registration, parts coverage is 5 years. Conditions apply.
Who usually buys a 2 ton EcoTemp package heat pump?
Manufactured-home owners, landlords replacing small rental units, and owners of cottages, guest houses and small offices in warm-to-moderate climates.



WJH5 Technical Specifications