GLXS4 Condenser Features:
. High-efficiency compressor
. SmartShift technology to ensure quiet reliable defrost
. Enhanced aluminum fin coil- 5 mm diameter
. Single-speed PSC condenser fan motor
. Factory-installed bi-flow liquid-line filter drier
. Factory-installed suction-line accumulator
. Factory-installed compressor crankcase heater
. Factory-installed high-capacity muffler
. High- and low-pressure switches
. Service valves with sweat connections and easy access to gauge ports
. Fully charged for 15ft of tubing length
. Fully enclosed contactor with lug connection
. Ground lug connection
. Capacitors with extended life
. AHRI Certified; ETL Listed
Cabinet Features
. Removable grille-style top design compliant with UL 60335-2-40
. Steel louver coil guard
. Heavy-gauge galvanized-steel cabinet
. Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
. Top and side maintenance access
. When properly anchored, meets the 2023 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)
AWST Air Handler Standard Features:
. Equipped with a fully adjustable TXV
. Direct-drive, multi-speed motors allows air volume variation for heating/cooling
. Sequence-controlled, rust-resistant nickel chromium heating elements of 3, 5, 8, and 10 kW
. Aluminum tubing coils on all models
. Cabinet air leakage less than 2.0% at 1.0 inch H2O when tested in accordance with ASHRAE standard 193
. UL 60335 2-40 Compliant
. Factory installed R-32 sensor designed for the lifespan of the coil.
. Cabinet air leakage less than 1.4% at 0.5 inch H2O when tested in accordance with ASHRAE standard 193
. Factory-installed pull-type disconnect
. Thermoplastic drain pan with bottom primary and secondary drain connections
. Built-in filter rack (filter included)
. Large chassis (2.5 and 3 ton units) front return only
. Small chassis (1.5 and 2 ton units) front or bottom return
. Wall-hanging bracket provided
. AHRI Certified; ETL Listed
GLZS4M Technical Specifications
GLZS Warranty Certificate
AWST Technical Specifications "SEER2" stands for Seasonal Energy Efficiency Ratio 2. Specifically, SEER2 is the total heat removed from the conditioned space during the annual cooling season. The M1 testing procedure will increase systems' external static pressure by a factor of five to better reflect field conditions of install equipment. With this change, new nomenclature will be used to denote M1 ratings (including EER2 and HSPF2).
