US Motors 0131M00271S ECM Blower Motor 3/4 HP 120/240V 1250 RPM – Goodman/Amana Closeout
The 0131M00271S is a 3/4 HP programmed ECM indoor blower motor built by US Motors as a factory OEM part for Goodman and Amana furnaces and air handlers. It runs on 120/240V single-phase power at a rated 1250 RPM in a 48 frame. This is new old stock, and it is our last one. It has never been installed and has been on our shelf since it came in. Goodman has since replaced this part number with 0131M01003S. If your blower motor's label reads 0131M00271S, this is the original part number at a closeout price.
Is the 0131M00271S the Right Blower Motor for Your System?
Programmed ECM blower motors are not universal. The factory loads airflow settings into the motor to suit specific Goodman and Amana indoor equipment. The safest match is the part number on your failed motor's label or in your furnace or air handler parts list. If either one calls for 0131M00271S, this motor uses the same original part number.
Before you buy, compare horsepower (3/4 HP), voltage (120/240V), frame size (48) and the connector layout on the old motor. If your old motor shows the newer 0131M00112S or 0131M01003S part number, or if you aren't sure which program your equipment needs, call us before ordering.
Ideal for: HVAC service techs and homeowners repairing a Goodman, Amana or Janitrol gas furnace or air handler whose original 0131M00271S blower motor has failed.
Need a universal option? If your system needs a different program, consider the Evergreen EM 3/4 HP ECM blower motor 6207X, a field-configurable ECM replacement for many 3/4 HP indoor blower applications.
Product photo is a stock image for reference only. The actual motor, label and packaging may look different. Fitment information is a general guide only. Always confirm the part number on your existing motor or in the equipment parts list before ordering. This is a single new old stock unit sold as a closeout. Request part-matching help, contact Budget Heating, or call 813-885-7999.
What's Included
| Part Number | 0131M00271S — US Motors Programmed ECM Blower Motor |
|---|---|
| OEM Equipment | Goodman / Amana Furnaces and Air Handlers |
| Current Replacement | Superseded by Goodman 0131M01003S |
| Application | Indoor Blower Motor, Direct Drive |
| Horsepower | 3/4 HP |
| Motor Type | Factory-Programmed ECM, Variable Speed |
| Electrical | 120/240V, Single Phase |
| Rated Speed | 1250 RPM |
| Frame | 48 Frame |
| Condition | New Old Stock, Never Installed, Closeout, Last Unit |
You receive one US Motors 0131M00271S programmed ECM blower motor. Your existing blower wheel, mounting ring or bracket, and wiring harnesses are reused from the furnace or air handler. Because the program sits in the motor itself, a matching factory part number generally restores the airflow your equipment was designed for, without field programming.
Motor Features & Service Notes
0131M00271S Programmed ECM Blower Motor
- OEM blower motor part number for Goodman and Amana indoor equipment
- Built by US Motors (Nidec) to Goodman's factory specifications
- 3/4 HP output for larger-capacity furnaces and air handlers
- Dual-voltage 120/240V single-phase design
- 1250 RPM rated speed
- Electronically commutated motor for efficient variable-speed airflow
- Factory-programmed to match OEM equipment airflow settings
- Standard 48 frame for direct-drive blower assemblies
- Quieter, smoother airflow ramp-up than a PSC blower motor
- Lower electrical draw at reduced fan speeds
Closeout Buying & Installation Notes
- New old stock, never installed and kept on our shelf
- Last unit available at closeout pricing
- Goodman's current replacement number is 0131M01003S
- Match 0131M00271S on your old motor label or the parts list
- Check the power and control connectors against your existing motor
- Reuse your existing blower wheel, so inspect it for wear or imbalance
- Check the control board and wiring before replacing a "dead" ECM motor
- Not a plug-in swap for a PSC or non-programmed ECM blower motor
- Installation by a qualified HVAC technician is recommended
- Turn off power and allow the motor capacitors to discharge before service
Specifications & Manuals
Manufacturer documentation for this closeout blower motor is not posted. For fitment questions or programming details, contact Budget Heating at 813-885-7999 before ordering.
Frequently Asked Questions
Has the 0131M00271S been replaced by a newer Goodman part number?
Yes. Goodman's current replacement is 0131M01003S. This closeout gives you the original 0131M00271S part number at a reduced price, for anyone who wants to match the label on their existing motor.
Why does a programmed ECM motor need to match my exact part number?
The factory loads airflow settings into a programmed ECM motor for specific equipment. A motor with the wrong program may deliver incorrect airflow for heating or cooling, so match the part number listed for your furnace or air handler.
Will this blower motor work in my Goodman or Amana furnace?
It will work if your furnace or air handler parts list, or your failed motor's label, calls for 0131M00271S. Send us your equipment model and serial number and we can help you check fitment.
Can I use this motor to upgrade a PSC blower to ECM?
No. The 0131M00271S needs the control signals and wiring that Goodman and Amana variable-speed equipment provides. For a PSC conversion, look at a universal ECM replacement motor instead.
Does the 0131M00271S come with a blower wheel or mounting hardware?
No. You receive the motor only. Your existing blower wheel, mounting ring and wiring harnesses carry over from the original installation.
Is the product photo the actual 0131M00271S I will receive?
No. The photo is a stock image for reference. You'll receive the new old stock 0131M00271S motor described on this page, but its label, color or packaging may look different from the picture.
