decor decor
D1036, D1036-S, F48H03A01 | Universal 3-Speed Century Blower Motor – One Never-Installed Closeout Left

Century Furnace Blower Motor 1/3HP 208-230v 1075/3 Speed, D1036

· SKU FLcloseout40
Average Rating:
List price: $249.00

Sale price:

$99.00
You save $150.00!
  • SKU: FLcloseout40
  • Availability:
    Usually Ships in 2 to 3 Business Days
  • Shipping:
    Calculated at Checkout
Adding to cart… The item has been added

Century D1036 Furnace Blower Motor 1/3 HP 208-230V 1075 RPM 3-Speed – Closeout

The Century D1036 is a 1/3 HP, three-speed permanent split capacitor (PSC) direct-drive blower motor for 208-230V single-phase furnaces, air handlers and fan coils. It is rated at 1075 RPM in a 5-5/8 in. diameter, 48 frame. Lead-reversible rotation and resilient ring mounting let this one Century motor replace a wide range of original 1/3 HP indoor blower motors across many equipment brands. This is new old stock, and it is our last one. It has never been installed and has been on our shelf since it came in, so it makes an easy truck-stock or emergency replacement at a closeout price.

Will the Century D1036 Fit Your Furnace or Air Handler?

The D1036 is a universal replacement blower motor, so the match comes from the nameplate rather than the equipment brand. It suits direct-drive blower assemblies that originally used a 1/3 HP, 1075 RPM, 208-230V single-phase PSC motor. With three speed taps, you can set separate heating and cooling airflow just as the original motor was wired.

Before you buy, compare the old motor's horsepower, voltage, RPM and frame diameter, and check how it was mounted: resilient rings, belly band or extended studs. Note the capacitor rating and the shaft size so your blower wheel hub fits. Matching horsepower and speed preserves the airflow, temperature rise and coil performance your system was set up for.

Ideal for: HVAC techs and maintenance teams replacing failed 1/3 HP, 208-230V PSC blower motors in electric furnaces, air handlers, fan coils and packaged indoor sections.

Need more airflow? For larger blower assemblies, step up to the 1/2 HP 208-230V 1075 RPM blower motor or the 3/4 HP 208-230V 1075 RPM 3-speed reversible blower motor.

Product photo is a stock image for reference only. The actual motor, label and packaging may look different. Replacement guidance is a general guide only. Always compare the nameplate on your existing motor before ordering. This is a single new old stock unit sold as a closeout. Request motor-matching help, contact Budget Heating, or call 813-885-7999.

What's Included

Catalog Number D1036 — Century Fan & Blower Motor
Application Universal Direct-Drive Furnace / Air Handler Blower Motor
Horsepower 1/3 HP (0.25 kW)
Speed 1075 RPM, 3 Speeds
Electrical 208-230V, Single Phase, 60 Hz, 2.7 A
Motor Type Permanent Split Capacitor (PSC), Air Over Duty
Frame / Diameter 48 Frame, 5-5/8 in. Diameter, Rolled Steel
Shaft 1/2 in. Diameter x 4-1/2 in. Extension, Flat
Rotation / Mounting Reversible, Resilient Ring Mount
Protection Automatic Thermal Overload, Class B Insulation, 40°C Ambient
Condition New Old Stock, Never Installed, Closeout, Last Unit

You receive one Century D1036 three-speed blower motor. Your existing blower wheel and mounting hardware carry over, and a 370V run capacitor sized to the motor nameplate is required for operation. The D1036 is UL Recognized, carries a 1.0 service factor and is designed for horizontal mounting in the air stream of a direct-drive blower housing.

Motor Features & Service Notes

Century D1036 3-Speed PSC Blower Motor

  • Century universal replacement blower motor from Regal Rexnord
  • 1/3 HP for small to mid-size furnaces, air handlers and fan coils
  • Three speed taps for separate heating and cooling airflow
  • 1075 RPM, 6-pole PSC design
  • 208-230V single phase, 60 Hz, 2.7 full-load amps
  • Lead-reversible rotation for clockwise or counterclockwise blower wheels
  • Resilient ring mounting to reduce vibration and noise
  • 1/2 in. x 4-1/2 in. flat shaft for a secure set-screw hold
  • Automatic-reset thermal overload protection
  • UL Recognized, Class B insulation, 40°C ambient rating

Closeout Buying & Installation Notes

  • New old stock, never installed and kept on our shelf
  • Last unit available at closeout pricing
  • Match horsepower, RPM and voltage to your old motor's nameplate
  • Run capacitor not included, so size it per the nameplate at 370V
  • Set rotation to match the blower wheel before final assembly
  • Wire the speed taps to the control board heat and cool terminals
  • Insulate and secure any unused speed leads
  • Reuse your mounting arms or belly band if they're in good condition
  • Clean or replace a dirty blower wheel to restore full airflow
  • Disconnect power and discharge the capacitor before service

Specifications & Manuals

 

Manufacturer documentation for this closeout motor is not posted. For help matching a blower motor, capacitor or speed wiring, contact Budget Heating at 813-885-7999 before ordering.

Frequently Asked Questions

How do I choose which of the three speeds to use on the D1036?

Connect the speed leads to match how your original motor was wired, typically one tap for cooling and another for heating. Then check temperature rise and airflow against your equipment's specifications, and adjust the tap if needed.

What capacitor does the Century D1036 require?

The D1036 is a PSC motor and needs a 370V run capacitor, which is not included. Use the microfarad value printed on the motor nameplate, and replace an old capacitor that is swollen or out of tolerance.

Can the Century D1036 replace an OEM-branded furnace blower motor?

Often, yes. It is designed as a universal replacement for many brand-specific 1/3 HP, 208-230V, 1075 RPM PSC blower motors, as long as the frame size, shaft and mounting match your equipment.

Will the D1036 work on a 115V furnace?

No. The D1036 is rated for 208-230V single-phase power. A 115V furnace needs a 115V blower motor of matching horsepower and speed.

Is the Century D1036 reversible?

Yes. Rotation is reversed by changing leads per the motor's wiring label, so it can drive blower wheels that turn clockwise or counterclockwise.

Does the closeout D1036 look the same as the photo?

The photo is a stock image. Because this is new old stock, your D1036 may carry older Century or A.O. Smith labeling and packaging that differs from the picture.

Customer Review

You Might Also Like