Mini Split Multi 3 Zone Daikin up to 17.9 SEER Heat Pump System 3MXS24NMVJU x 3 Wall Mount or Ceiling Cassette

Knowledge

ABOUT THIS SYSTEM:*:

ABOUT THIS SYSTEM: Mix & Match Wall Mount and/or Ceiling Cassette for your custom system. Please select from below each of the indoor units. It is not required to use all three zones. The sum of the total indoor BTUs can not exceed 39K. Example: 18+18=36K BTU (suitable), 9+12+18=39K BTU (suitable), 12+15+18=45K BTU (NOT suitable).

Fast Track

Fast Track Shipping [Add $69.00]Ships out your order(s) next business day after order is paid for in full. Your order(s) typically arrive to your shipping address in no more than 4 business days East Coast, and 7 business days for the West Coast/Midwest. Please note: Budget Heating & Air cannot control trucking company timelines, transit times may vary based on destination and factors out of the the company's control. (If we are out of your product, you will be contacted within 24 hours with the option to have this fee refunded)

STANDARD SHIPPING Ships out 3 to 5 business days Will arrive to your shipping address in no more than 10 business days. No more than 12 business days for the West Coast.

Indoor Zone One

Select Air Handler #1:

NOTE: Wall Mounts & Ceiling Cassettes both include wireless remote controls!

Do You Need?

Copper/Electrical Install Zone #1:

SET CONTAINS: Insulated copper lines, pre-flared and fitted with compression nuts & 14/4 or 16/4 communicating wire for indoor unit connection.

Indoor Zone Two

Select Air Handler #2:

NOTE: Wall Mounts & Ceiling Cassettes both include wireless remote controls!

Do You Need?

Copper/Electrical Install Zone #2:

SET CONTAINS: Insulated copper lines, pre-flared and fitted with compression nuts & 14/4 or 16/4 communicating wire for indoor unit connection.

Indoor Zone Three

Select Air Handler #3:

NOTE: Wall Mounts & Ceiling Cassettes both include wireless remote controls!

Do You Need?

Copper/Electrical Install Zone #3:

SET CONTAINS: Insulated copper lines, pre-flared and fitted with compression nuts & 14/4 or 16/4 communicating wire for indoor unit connection.

Drain Pan Heater

Cold Climate Option*:

Optional drain pan heater is available for colder climates with prolonged heating operation below the units designed temperature of 5F and/or in areas where high humidity and icing conditions exist.