RectorSeal SS1 Primary Inline Float Switch With Cleanout Tool
The SS1 In-line float switch mounts inline with a 3/4" PVC drain line. Includes cleanout tool.
This device is considered a must to prevent air handler condensation buildup which could damage any ceiling, wood floors or carpeted areas if air handler is allowed to continue to run without a safety device in place to shut down air handler. The SS1 does just that! If water levels rise in primary drain line the float switch will engage and shutdown the air handler until drain line is cleared and flowing normal again. In almost every county it is code to have this device installed! Save yourself thousands of dollars in repairs for a minimal cost now, trust us you will be happy you did! As the saying goes its better to know you have a problem than to find out you have a problem the hard way with expensive repairs after the fact.
For inline installation on primary drains 3/4" PVC drain line. INCLUDES directional clean-out tool.
Features a magnetic Reed switch and can be connect to either red or yellow low voltage wire.
The most reliable float switch on the market!
