4 Ton EcoTemp 13.4 SEER2 R-454B Heat Pump Package Unit, WJH548000K000B
The EcoTemp WJH548000K000B gives larger homes 1,600 CFM of airflow from a 3/4 HP direct-drive blower, with 45,500 BTU/h of cooling and 45,000 BTU/h of heating at 47°F on R-454B refrigerant. It's rated 13.4 SEER2, 11.05 EER2 and 6.7 HSPF2, and it's the first WJH5 size approved for a 20 kW backup heater. That makes it a strong all-electric package unit for big houses, large manufactured homes and light-commercial buildings in climates with real winters.
Is a 4 Ton Heat Pump Package Unit the Right Size?
The WJH548000K000B fits cooling loads near 45,000 to 48,000 BTU/h. Typical examples are large homes, homes with bonus rooms or vaulted ceilings, the largest manufactured homes, and classrooms, studios and offices. At 17°F it produces 25,400 BTU/h, and heaters up to 20 kW cover backup and emergency heat.
At this airflow, duct sizing is as important as equipment sizing. Undersized returns can limit performance. Browse our EcoTemp HVAC equipment for matching accessories and other EcoTemp systems.
Ideal for: Large homes, vaulted-ceiling layouts, large manufactured homes, classrooms and offices with all-electric service.
Need more capacity? Step up to the 5 Ton EcoTemp WJH560000K000B Heat Pump Package Unit, the largest in the WJH5 series.
Recommended applications are general guidelines only. Actual system requirements depend on a load calculation, insulation, ductwork, climate, occupancy, and local code requirements. Request free sizing assistance, contact Budget Heating, or call 813-885-7999.
What's Included
| Packaged Unit | WJH548000K000B — 4 Ton R-454B Packaged Heat Pump |
|---|---|
| Cooling Capacity | 45,500 BTU/h (AHRI) |
| Heating Capacity | 45,000 BTU/h at 47°F / 25,400 BTU/h at 17°F |
| Efficiency | 13.4 SEER2, 11.05 EER2, 6.7 HSPF2 |
| Refrigerant | R-454B, Factory Charged (8.25 lb), Leak Detection Dissipation System |
| Compressor | Scroll Compressor With Internal High-Pressure and Overcurrent Protection |
| Indoor Blower | Direct-Drive Multi-Speed, 3/4 HP, 1,600 Rated CFM |
| Duct Connections | Horizontal Supply and Return (Start Collars Provided) |
| Electrical | 208/230V, Single Phase, 60 Hz (36.4 MCA, 60 A Max Overcurrent) |
| Backup Heat | 5, 7.5, 10, 15 or 20 kW Breakered Accessory Heater (Sold Separately) |
The 4 ton steps up to a 3/4 HP indoor blower and a 15.5 sq. ft. outdoor coil, the largest in the 042-060 cabinet, with a 408 lb shipping weight. It's approved for EcoTemp's breakered single-point heaters from 5 kW up to the 20 kW CPHEATER132A00, and it ships factory charged with R-454B.
Heat Pump & Cabinet Features
WJH548000K000B Heating & Cooling Performance
- 45,500 BTU/h AHRI cooling capacity
- 45,000 BTU/h heating at 47°F
- 25,400 BTU/h heating at 17°F
- 13.4 SEER2, 11.05 EER2, 6.7 HSPF2
- 3/4 HP direct-drive blower, 1,600 CFM
- 15.5 sq. ft. outdoor coil with 3,100 CFM fan
- Hermetic scroll compressor with internal protection
- Demand-initiated defrost
- Factory R-454B leak detection dissipation system
- First WJH5 size approved for 20 kW heat
WJH548000K000B Cabinet & Installation
- 32" x 51" footprint, 408 lb shipping weight
- Rust-proof composite base with integrated drain
- Watertight steel cabinet
- Louvered coil enclosure for hail protection
- Front and side service panels
- Hand-holds in the basepan
- Duct start collars included
- Square-to-round adapter option on this page
- ASHRAE 193 leakage tested cabinet
- Single-point heater and unit power
Specifications & Manuals
See EcoTemp's documentation for 4 ton performance and airflow data, 20 kW heater electrical requirements, physical data and warranty registration.
Frequently Asked Questions
Can the WJH548000K000B use a 20 kW heater?
Yes. The 4 ton is approved for EcoTemp's 20 kW breakered heater (CPHEATER132A00 / WZH2002SX). With it installed, EcoTemp lists 126.5/140.5 MCA and a 150 A maximum overcurrent device at 208/240V.
How does the 4 ton compare to the 3.5 ton WJH542000K000B?
The 4 ton delivers 45,500 BTU/h of cooling (versus 40,500) and 45,000 BTU/h of heating at 47°F (versus 39,000). Its 3/4 HP blower moves 1,600 CFM compared with 1,400 CFM, and it accepts heaters up to 20 kW instead of 15 kW.
What is the minimum conditioned space for the 4 ton R-454B unit?
EcoTemp lists a 137 sq. ft. minimum conditioned space area and a required minimum dissipation airflow of 239 CFM for the 4 ton WJH5.
How loud is the WJH548000K000B?
EcoTemp rates the 4 ton at 78 dBA, tested in compliance with AHRI 270.
How do heater kW ratings change at 208 volts?
EcoTemp heaters are rated at 240V. At 208V, multiply the rated kW by 0.75, so a 15 kW heater delivers about 11.3 kW. At 230V the multiplier is 0.92.
Where is a 4 ton EcoTemp package heat pump typically installed?
Large single-family homes, the largest manufactured homes, and all-electric commercial spaces such as classrooms, studios and offices.



WJH5 Technical Specifications