2.5 Ton Goodman R-410A Variable Speed Air Handler — AMVT30BP1400
The Goodman AMVT30BP1400 is a 2.5-ton (30,000 BTU/h) multi-position variable-speed air handler built for R-410A residential cooling and heat pump systems. Its 1/2 HP ECM blower, integrated ComfortBridge communicating controls, and factory-installed thermal expansion valve deliver quiet, precise, efficient airflow for homeowners and contractors upgrading a central comfort system with a matched 2.5-ton outdoor unit.
Is a 2.5 Ton Air Handler the Right Size?
A 2.5-ton air handler is engineered to move conditioned air for roughly 30,000 BTU/h of cooling capacity, typically matching homes in the range of about 1,200 to 1,600 square feet. Correct sizing depends on far more than floor area — it is driven by the capacity of the outdoor unit it is paired with and the home's real heat load.
Insulation quality, window area and orientation, ceiling height, local climate, ductwork design, and the rated capacity of the matched condenser or heat pump all influence whether 2.5 tons is the right selection. Because this is an indoor coil-and-blower component, it must be matched to a compatible 2.5-ton (or AHRI-matched) R-410A outdoor unit for proper performance.
Ideal for: 2.5-ton residential upflow, downflow, and horizontal installations paired with a matched R-410A condenser or heat pump.
Building a current-refrigerant system? Explore the next-generation Goodman AMVT30BP1300 R-32 variable-speed air handler or browse all variable-speed 2.5-ton air handlers.
Recommended sizing is a general guideline only. Actual requirements depend on insulation, climate, duct design, window load, and the matched outdoor unit. Request free sizing assistance, contact Budget Heating, or call 813-885-7999.
Key Specifications
| Brand & Model | Goodman AMVT30BP1400 |
|---|---|
| Nominal Capacity | 2.5 Tons (30,000 BTU/h) |
| Refrigerant | R-410A |
| Nominal Airflow | Approx. 670–1,000 CFM (variable-speed ECM) |
| Blower Motor | 1/2 HP Variable-Speed ECM |
| Cabinet Width | 17.5" |
| Installation | Multi-Position (Upflow / Downflow / Horizontal) |
| Electrical | 208/240V, 1 Phase, 60 Hz (MCA 4.9A, MOCP 15A) |
| Evaporator Coil | All-Aluminum with Factory-Installed TXV |
| Controls | ComfortBridge Communicating + CoolCloud Bluetooth |
| Certification | AHRI Certified, ETL Listed |
The AMVT30BP1400 combines a variable-speed ECM blower with Goodman's ComfortBridge communicating technology inside a compact 17.5"-wide SmartFrame cabinet, giving contractors a flexible, multi-position indoor unit that pairs with a wide range of 2.5-ton R-410A outdoor equipment.
Air Handler Features
Variable-Speed Blower & ComfortBridge Controls
- 1/2 HP variable-speed ECM blower motor for quiet, efficient airflow
- Nominal airflow range of approximately 670–1,000 CFM
- Integrated ComfortBridge communicating technology
- Onboard Bluetooth commissioning via the Goodman CoolCloud app
- Automatic airflow and tonnage configuration in communicating mode
- Onboard CFM indicator and adjustable low-CFM fan-only operation
- Fault recall of the six most recent fault codes
- Compatible with single- and multi-stage cooling and heat pump systems
SmartFrame Cabinet & All-Aluminum Coil
- Durable SmartFrame cabinet, 17.5" wide for tight mechanical closets
- All-aluminum evaporator coil for long-term corrosion resistance
- Factory-installed thermal expansion valve for cooling and heat pump use
- Multi-position installation: upflow, downflow, and horizontal
- 3/8" liquid and 3/4" suction line connections
- 3/4" FPT condensate drain connection
- Field-installed electric heat kits available from 5 kW to 15 kW
- R-410A compatible; AHRI certified and ETL listed
Specifications & Manuals
Product documentation includes technical specifications and warranty information to assist with equipment selection, installation, and service.
Frequently Asked Questions
What refrigerant does the AMVT30BP1400 use?
The AMVT30BP1400 is configured for R-410A and must be matched with an R-410A outdoor condenser or heat pump. For new R-32 system builds, see the current-generation AMVT30BP1300.
Which outdoor units can I pair with this 2.5-ton air handler?
Pair the AMVT30BP1400 with a compatible 2.5-ton (or AHRI-matched) R-410A Goodman condenser or heat pump. Confirm the AHRI-matched combination to ensure rated capacity and efficiency.
What is ComfortBridge technology?
ComfortBridge is Goodman's integrated communicating control. It automatically configures airflow and tonnage in communicating mode, stores recent fault codes, and supports Bluetooth commissioning and diagnostics through the CoolCloud app.
Can the AMVT30BP1400 be installed in any position?
Yes. This is a multi-position air handler suitable for upflow, downflow, and horizontal-left or horizontal-right installations, giving flexibility in closets, attics, and basements.
Does this air handler include electric heat?
No. Electric heat is optional. Field-installed heat kits are available in 5 kW, 8 kW, 10 kW, and 15 kW sizes to add supplemental or backup electric heat.
What warranty comes with the AMVT30BP1400?
It carries up to a 10-year parts limited warranty when registered online within 60 days of installation; otherwise a 5-year parts limited warranty applies. Commercial installations receive a 5-year term.

AMVT Technical Specifications