 |
 |
 |
|
Rheem Select 2.5 Ton 14.3 SEER2 Two Stage Heat Pump System WP14AY30AJ2N, RH2TY3617STANN
R-454B Refrigerant
WP14AY Condenser Features and Benefits
• Two-Stage Scroll Compressor: Features
two speeds (high and low) of cooling and heating, providing more
precise temperature control, lower humidity and greater efficiency when
compared to single stage compressors
• Inverted Reversing Valve: Allows for faster heat transfer with gravity assist shifting and reduced joint stress for increased reliability
• PlusOne Expanded Valve Space: 3 in. – 4 in. – 5 in. service valve space—provides a minimum working area of 27-square inches for easier access
• PlusOne Triple Service Access: 15
in. wide, industry leading corner service access, two fastener,
removable corner and individual louver panels—makes repairs easier and
faster
• Designing for Sustainability with Low GWP: For 2025,
the Environmental Protection Agency (EPA) has set a global warming
potential (GWP) limit of 700 for refrigerant used in heating and cooling
systems. This new requirement will result in a 78% lower GWP than
previous-generation refrigerants — with only minimal changes to system
installation. For us, this is another step toward our continued
sustainability goal of reducing greenhouse gas emissions, while still
delivering an exceptional level of energy efficient, dependable comfort
• PlusOne Refrigerant Detection System: An
integrated one-box, patented design featuring the A2L sensor and
mitigation board, offering easier commissioning with a single component
and simplified wiring configuration, compatibility with any 24V
thermostat application and system protection by automatically pausing
outdoor unit operation — if excess refrigerant is detected
RH2TY Air Handler Features and Benefits
• Quiet Operation: Provided by a cabinet construction with 1.0 inch of foil faced insulation for quieter sound characteristics
• Aluminum Indoor Coil Design: Constructed of aluminum fins bonded to internally grooved aluminum tubing and are more corrosion resistant
• Versatile 4-Way Convertible Compact Design: Allow for upflow, downflow, horizontal left and horizontal right applications even in the smallest of spaces
• Rugged Steel, Compact Cabinet Construction: Designed for added strength and versatility
• Field Installed Auxiliary Heater Kits: Provide exact heat for indoor comfort and include circuit breakers which meet UL and cUL requirements for service disconnect
• Less than 2% Cabinet Air Leakage at 1-inch H2O: When tested in accordance with ASHRAE Standard 193
• Designing for Sustainability with Low GWP:
For 2025, the Environmental Protection Agency (EPA) has set a global
warming potential (GWP) limit of 700 for refrigerant used in heating and
cooling systems. This new requirement will result in a 78% lower GWP
than previous-generation refrigerants — with only minimal changes to
system installation. For us, this is another step toward our continued
sustainability goal of reducing greenhouse gas emissions, while still
delivering an exceptional level of energy efficient, dependable comfort
• PlusOne Refrigerant Detection System:
An integrated one-box, patented design featuring the A2L sensor and
mitigation board, offering easier commissioning with a single component
and simplified wiring configuration, compatibility with any 24V
thermostat application and system protection by automatically pausing
outdoor unit operation — if excess refrigerant is detected
|
|
|
 |
|
 |
|
